• Journal of the Korean Institute of Telematics and Electronics
• /
• 제22권4호
• /
• pp.66-71
• /
• 1985

A MOSFET with multigates arrayed in periodic structure is studied as a transit time device for microwave amplification. The interactions between the periodic metal gates and the slow wave on the surface of the semiconductor can be observed in the vicinity of synchronism. The stability and the reciprocity of the active quadrupole are shown depending on the frequency and velocity of the carriers.

• BMB Reports
• /
• 제29권1호
• /
• pp.17-21
• /
• 1996

Ile91 of restriction endonuclease EcoRV, which has not been known to take part directly in catalytic activity, was substituted with Leu by site-directed mutagenesis. The Ile91Leu mutant shows over 1000-fold less activity than the wild type EcoRV under standard reaction condition. The metal ion dependency of the reaction was altered. In contrast to the wild type EcoRV, the mutant prefers $Mn^{2+}$ to $Mn^{2+}$ as the cofactor. In $Mn^{2+}$ buffer the mutant is as active as the wild type enzyme in $Mn^{2+}$ buffer. Like the wild type enzyme, the mutant shows an unspecific binding of DNA in gel shift experiments. In contrast to the wild type enzyme, the mutant did not cleave at noncognate sites of DNA under star condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.68-77
• /
• 1994

TIG welding process is applied for the active metal such as aluminum and titanium, also sometimes for overlay welding of superalloy. However the welding speed to be applied is very low because of the unstable bead formed in the region of high current and high welding speed. The present study was carried out to examine the basic phenomena of high speed TIG melt run welding by the 2% Th - W electrode(dia.3.2mm) of various tip shapes.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.633-638
• /
• 2002

An approach to enhance dimensional accuracy of the grinding process has been presented, and grinding of a glass material with a metal-bonded diamond wheel has been studied. In this study, a grinding tool is suspended flexibly and controlled by an electromagnetic actuator. During grinding, profile error of a ground surface is indirectly measured and fed back to a control system. A model of grinding error has been suggested on which the indirect measurement has been based. An optimal PID control is adopted and effectiveness of the in-process feedback control has been verified experimentally.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.301-302
• /
• 2006

초고주파 전력 증폭기의 바이어스 전압을 조절하여 온도 변화에 따른 드레인(Drain) 전류의 변화를 억제하기 위한 저가의 능동 바이어스 모듈을 개발한다. 능동 바이어스 모듈을 5 W급 초고주파 전력증폭기에 적용하였을 경우, $0{\sim}60^{\circ}C$까지의 온도변화에 대하여 소모전류 변화량은 0.1 A 이하로 되어야 한다. 본 기술 개발 대상인 능동 바이어스 모듈의 성능 시험을 위한 대상 전력증폭기는 $2.11{\sim}2.17GHz$ 주파수 대역에서 32 dB 이상의 이득과 ${\pm}0.1\;dB$ 이하의 이득 평탄도, -15 dB 이하의 입.출력 반사손실을 가진다.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.283-286
• /
• 1999

A 2㎓, low noise, low power CMOS voltage-controlled oscillator (VCO) with an integrated LC resonator is presented. The design of VCO relies heavily on the on-chip spiral inductor. An optimized spiral inductor with Q-factor of nearly 8 is achieved and used for the VCO. The simulated result of phase noise is as low as -l14 ㏈c/Hz at an offset frequency of a 600KHz from a 2㎓ carrier frequency. The VCO is tuned with standard available junction capacitors, resulting in an about 400MHz tuning range (20%). Implemented in a five-metal 0.25${\mu}{\textrm}{m}$ standard CMOS process, the VCO consumes only 2㎽ from a single 2.5V supply. It occupies an active area of 620${\mu}{\textrm}{m}$$\times$720${\mu}{\textrm}{m}$.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.25-29
• /
• 2016

Recently, a hyaluronic acid micro needle patch for therapeutic and cosmetic purposes has been used by attaching directly to the skin with a pattern having a micro needle shape of 1/3 thickness of hair. These products are attracting attention as an innovative product that maximizes the effect by activating the active ingredient in the skin in the deep skin without blocking the horny layer because the micro needle shape exists on the patch surface so that it can penetrate effectively to the skin. Currently, DAB (droplet air blowing) or MEMS technology is used to make pattern shapes for patches. Because of this technology, manufacturing time is long and manufacturing cost is high, so we tried to develop the mold technology to machine the microneedle shape directly to the metal. In this study, we first fabricated a needle pattern with a quadrangular pyramid shape and finally produced a conical needle pattern.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제35권6호
• /
• pp.407-413
• /
• 2015

Ultrasonic infrared thermography is an active thermography methods. In this method, mechanical energy is introduced to a structure, it is converted into heat energy at the defects, and an infrared camera detects the heat for inspection. The heat generation mechanisms are dependent on many factors such as structure characteristics, defect type, excitation method and contact condition, which make it difficult to predict heat distribution in ultrasonic infrared thermography. In this paper, a method to simulate frictional heating, known to be one of the main heat generation mechanisms at the closed defects in metal structures, is proposed for ultrasonic infrared thermography. This method uses linear vibration analysis results without considering the contact boundary condition at the defect so that it is intuitive and simple to implement. Its advantages and disadvantages are also discussed. The simulation results show good agreement with the modal analysis and experiment result.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.183-186
• /
• 2000

In this paper we propose a new architecture of a programmable digital automatic gain controller(AGC) for analog interface in mixed mode systems. Compared with conventional analog AGCs which have difficulties in integration due to large capacitors, the proposed AGC is easily integrated. So the production cost can be reduced. In addition, The proposed AGC has a better performance in temperature, and power supply variations, and substrate noise than analog counterparts do. To prevent erroneous operations of the AGC due to noise, a mal-function preventer is newly proposed. In addition, to achieve an optimized AGC time constant, we propose a logic block which controls an up-down counting clock. This is directly related to the changing speed of the AGC gain. Implemented with a 0.25 $\mu\textrm{m}$ 1-poly, 5-metal CMOS parameters, the AGC operates from a single 2.5V power supply with the dynamic range of 36.ldB and occupies active area of 500$\mu\textrm{m}$${\times}$600$\mu\textrm{m}$

• Proceedings of the KSME Conference
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1558-1562
• /
• 2008

Ionic polymer metal composite (IPMC), one of Electro- Active Polymer (EAP) actuators, has great attention due to the low-voltage driven, large deformation and its potential for artificial muscles. In this paper, we firstly review fish swimming modes using various propulsion mechanisms. Based on study on the swimming mechanisms, we develop an underwater robot actuator which mimics fanning motion of webfoot form. It consists of four actuators fabricated by using IPMC and PDMS which mimics Bio-inspired motion Experiments using a prototype show that the webfooted IPMC actuator generates large deformation and propulsion.