• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4102-4110
• /
• 2022

Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m². Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 ℃, much below the permissible value of tungsten material (~1200 ℃). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-active-multijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5° toroidally from the 4.6 GHz LH system and is not magnetically connected.

• 대한화학회지
• /
• 제59권3호
• /
• pp.215-224
• /
• 2015

Unsymmetrical tetradentate Schiff base N-(2-hydroxy-5-methylacetophenone)-N'-(2-hydroxy acetophenone) ethylene diamine (H₂L) and its complexes with Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) have been synthesized and characterized by elemental analyses, magnetic susceptibility measurements, IR, electronic spectra and thermogravimetric analyses. ¹H, ¹³C-NMR and FAB Mass spectra of ligand clearly indicate the presence of OH and azomethine groups. Elemental analyses of the complexes indicate that the metal to ligand ratio is 1:1 in all complexes. Infrared spectra of complexes indicate a dibasic quadridentate nature of the ligand and its coordination to metal ions through phenolic oxygen and azomethine nitrogen atoms. The thermal behavior of these complexes showed the loss of lattice water in the first step followed by decomposition of the ligand in subsequent steps. The thermal data have also been analyzed for the kinetic parameters by using Horowitz-Metzger method. The dependence of the electrical conductivity on the temperature has been studied over the temperature range 313-403 K and the complexes are found to show semiconducting behavior. XRD and SEM images of some representative complexes have been recorded. The antimicrobial activity of the ligand and its complexes has been screened against various microorganisms and all of them were found to be active against the test organisms. The Fe(III) and Ni(II) complex have been tested for the catalytic oxidation of styrene.

• 한국환경과학회지
• /
• 제26권11호
• /
• pp.1275-1284
• /
• 2017

Acyltransferase (AT) catalyzes the transfer of an acyl moiety from acyl-coenzyme A (acyl-CoA) to an acceptor. ATs play important roles in the maintenance of homeostasis in the human body and have been linked to various diseases; therefore, several ATs have been proposed as potential targets for the treatment or prevention of such diseases. The AT family includes acyl-CoA:cholesterol AT (ACAT), diacylglycerol AT, and monoacylglycerol AT for the metabolism of lipids. Furthermore, recent molecular biological studies revealed the existence of their isozymes with distinct functions in the body. ACAT plays a critical role in the formation of cholesteryl esters from cholesterol and fatty acids, and is a potential target for treating hypercholesterolemia. During an experiment designed to discover biologically active compounds from herbal medicines, we isolated two known guaianolide sesquiterpene lactones from Chrysanthemum boreale Makino (Compositae). The lactones were characterized from their spectroscopic data (NMR, IR, MASS). These compounds were subjected to ACAT inhibition assay. Here, we report the isolation and structural elucidation of the compounds 8-o-acetyl-2-methoxy-10-hydroxy-3,11(13)-guaiadiene-12,6-olide and 8-acetyl-3,10-hydroxy-4(15),11(13)-guaiadiene-12,6-olide. In the ACAT inhibition assay, compound 1 showed strong inhibitory activity, with an $IC_{50}$ value $45{\mu}g/mL$, whereas compound 2 did not exhibit significant inhibitory activity with an over $100{\mu}g/mL$.

• 공업화학
• /
• 제10권5호
• /
• pp.666-671
• /
• 1999

본 연구에서 술폰화된 poly(phenylene sulfide)(SPPS)는 10%의 발연황산으로 PPST를 술폰화한 후 NaOH 수용액으로 demethylation하여 제조하였다. 유기용매에 용해되는 PPST는 methyl-(phenylthio)phenyl sulfoxide(MPPSO)의 자가축합 반응으로 합성되었다. SPPS는 $1200cm^{-1}$에서 $-SO_{3}H$의 비대칭 O=S=O 신축진동에 의한 흡수피크와 $621cm^{-1}$에서 S-O 신축진동에 의한 흡수피크가 관찰된 것으로 보아 술폰산기가 도입된 것을 알 수 있다. PPST의 술폰화를 $150^{\circ}C$에서 12시간 반응했을 때 반복단위당 1.48개의 술폰산기가 도입되었으며, 고온 GPC로 측정된 PPST와 SPPS의 중량평균분자량(Mw)은 각각 118323과 131204이었다. SPPS의 암모니아 가스 흡착능은 $9.67mmol\;NH_{3}/g$이었고, 활성탄, 실리카겔보다 월등히 높았다.

• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.3-9
• /
• 2009

AMOLED 디스플레이는 LCD에 비해 넓은 시야각, 빠른 응답 속도, 박막화의 용이성 등의 많은 장점들을 갖고 있으나 불균일한 TFT의 전기적 특성과 전원선의 전압 강하에 의한 휘도 불균일, 잔상 현상 및 수명 등과 같은 많은 문제점들이 있다. 이 중에서 본 논문에서는 구동 TFT 소자의 hysteresis 현상에 의해 발생하는 가역적 잔상 현상을 개선하고자 한다. TFT의 hysteresis 특성을 개선하기 위해 게이트 산화막 증착 전에 표면 처리 조건을 변경하였다. 게이트 산화막 증착 전에 실시한 자외선 및 수소 플라즈마 표면 처리는 게이트 산화막과 다결정 실리콘 박막 사이의 계면 trap 밀도를 $3.11{\times}10^{11}cm^{-2}$로 감소시켰고, hysteresis 레벨을 0.23 V로 줄였으며 출력 전류 변화율을 3.65 %로 감소시켰다. 자외선 및 수소 플라즈마 처리를 행함으로써 AMOLED 디스플레이의 가역적 잔상을 많이 개선할 수 있을 것으로 기대된다.

• 대한약침학회지
• /
• 제20권2호
• /
• pp.119-126
• /
• 2017

Objectives: Semecarpus anacardium Linn. is a plant well-known for its antimicrobial, antidiabetic and anti-arthritic properties in the Ayurvedic and Siddha system of medicine. This has prompted the screening of this plant for antibacterial activity. The main aims of this study were to isolate compounds from the plant's seeds and to evaluate their antibacterial effects on clinical bacterial test strains. Methods: The n-butanolic concentrate of the seed extract was subjected to thin layer chromatography (TLC) and repeated silica gel column chromatography followed by elution with various solvents. The compound was identified based on observed spectral (IR, $^1H$ NMR, $^{13}C$ NMR and high-resolution mass spectrometry) data. The well diffusion method was employed to evaluate the antibacterial activities of the isolated acyclic isoprenoid compound (final concentration: $5-15{\mu}g/mL$) on four test bacterial strains, namely, Staphylococcus aureus (MTCC 96), Bacillus cereus (MTCC 430), Escherichia coli (MTCC 1689) and Acinetobacter baumannii (MTCC 9829). Results: Extensive spectroscopic studies showed the structure of the isolated compound to be an acyclic isoprenoid ($C_{21}H_{32}O$). Moreover, the isoprenoid showed a remarkable inhibition of bacterial growth at a concentration of $15{\mu}g/mL$ compared to the two other doses tested (5 and $10{\mu}g/mL$) and to tetracycline, a commercially available antibiotic that was used as a reference drug. Conclusion: The isolation of an antimicrobial compound from Semecarpus anacardium seeds validates the use of this plant in the treatment of infections. The isolated compound found to be active in this study could be useful for the development of new antimicrobial drugs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• Nutrition Research and Practice
• /
• 제4권2호
• /
• pp.106-113
• /
• 2010

In this study, we compared corn gluten hydrolyzates, BCAAs, and leucine for their effects on body weight reduction in high fat-induced obese rats in order to determine the major active components in the corn gluten hydrolyzates. After obesity was induced for 13 weeks with high fat diet, the overweight-induced SD rats (n = 64) were stratified according to body weight, randomly blocked into eight treatments, and raised for 8 weeks. Four groups were changed to a normal diet and the other groups remained on the high fat diet. Each of the groups within both diets was fed either casein, corn gluten hydrolyzates, leucine, or branched chain amino acids, respectively. Daily food intake, body weight gain, and food efficiency ratio were significantly lower in the corn gluten hydrolyzate groups compared to the other groups, regardless of the high fat diet or normal fat diet. The rats fed the corn gluten hydrolyzates diet had the lowest perirenal fat pad weights whereas muscle weight was significantly increased in the corn gluten hydrolyzates groups. Plasma triglyceride, hepatic total lipid, and total cholesterol contents were significantly reduced in the corn gluten hydrolyzates groups. Other lipid profile measurements were not significantly changed. Plasma triglyceride and hepatic total lipid were also significantly reduced in the BCAA and leucine groups. Leptin levels were significantly lower and adiponectin was significantly higher in the corn gluten hydrolyzates groups. Fasting blood glucose, insulin, C-peptide, and HOMA-IR levels were also significantly reduced in the corn gluten hydrozylates groups, regardless of fat level.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.131-131
• /
• 2003

The advent of photonic technologies in the field of communications and data transmission has been heavily increasing the demand in integrated optical (IO) circuits capable of accomplishing not only simple tasks like signal, but also more sophisticated functions like all-optical signal routing or active multiplexing/demultiplexing. In the last decade, sol-gel technology has been widely used to prepare optical materials. Sol-gel processes show many promises for the development of low-loss, high-performance glass integrated optical circuits. However, crack formation is likely to occur during heat treatment in thick gel films. In order to overcome the critical thickness limitation, the organic-modified silicate has been widely used. In this case coating matrices have been prepared from the organo-silanes of T structures, acidic catalyst and the as-prepared gel films have been heat-treated below 200$^{\circ}C$ to avoid the crack formation and the degradation of organic components. However, the films prepared in the acidic condition and the low heat temperature make the films contain high OH groups which is the major optical loss function. In this work, C$\sub$6/H$\sub$5/SiO$\sub$1.5/ films were prepared on silicon substrate by sol-gel method using base catalyst in a PTMS/NH$_4$OH/H$_2$O/C$_2$H$\sub$5/OH system. The sol showed spinable viscosity at 50 wt% of solid content, and neglectable viscosity change with time. The films were crack-free and transparent after curing at 450 $^{\circ}C$, and highly condensed to minimize OH content in C$\sub$6/H$\sub$5/SiO$\sub$1.5/ networks. The effects of heat treatment of the films are characterized on the critical thickness, the chemical composition and the refractive indices by means of SEM, FT-IR, TGA, prism coupler, respectively.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.125-132
• /
• 2005

본 논문에서는 실시간 시선 식별을 위한 능동적 적외선 조명을 기반으로 한 컴퓨터 비전 시스템을 제안하고자 한다. 현존하는 대다수의 시선 식별 방법은 고정된 얼굴에서만 원활하게 동작하고 개개인에 대한 교정 절차를 필요로 한다. 그러므로 본 논문에서는 교정 작업 없이 얼굴 움직임이 있는 경우에도 견실하고 정확하게 동작하는 시선 식별 시스템을 제안하고 있다. 제안된 시스템은 추출된 변수로부터 시선을 스크린 좌표로 매핑하기 위해 GRNN을 이용하였다. 동공을 추적하여 GRNN을 사용함으로서, 시선 매핑에 분석적 기능이나 얼굴 움직임에 대한 계산이 필요 없을 뿐 아니라 다른 개개인에 대하여 학습과정에서 매핑 기능을 일반화 할 수 있었다. 시선 예측 정확도를 개선하고자 계층적 식별을 제안함으로써 오분류를 줄일 수 있었고, 공간 시선 해상도는 스크린에서 1m 정도 떨어진 거리에서 수평으로 10cm, 수직으로 약 13cm, 즉 수평으로 8도 수직으로 5도 이었다. 실험 결과, 재식별 하였을 경우 1차 시선 식별시 84%보다 약 9% 정도 정확성이 향상되어 93%를 나타냄으로써 제안된 시스템의 유효성을 증명하였다.