• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.123-131
• /
• 2006

The majority of pedestrian fatalities and injuries are caused by vehicle-pedestrian accidents. Recently, it has been recognized as a serious problem. Injuries of occupants in a vehicle have been decreased considerably. However, efforts for protection of pedestrians are still insufficient. These days, many advanced industries are striving for a better protection of pedestrians by using an active hood lift system, rather than reforming the existing structure. In this research, the active hood lift system is designed to enhance the performance for protection. The active hood lift system is analyzed by using the nonlinear finite element method. An optimization problem is formulated by incorporation of the analysis results. Orthogonal arrays are utilized to solve the formulated problem. An iterative optimization algothrithm using orthogonal arrays is utilized for design in the discrete space. It is found that the method can remarkably decrease the number of function evaluations.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.4
• /
• pp.157-170
• /
• 1999

The web-based groupware systems hold many possibilities for system developers and users. Especially, web-based group collaborative systems are emerging as enterprise-wide information systems. Since data in group collaborative systems are apt to be shared among multiple concurrent users and modified simutaneously by them, the web-based group collaborative systems must support synchronous collaboration in order to provide users with synchronized and consistent views of shared data. However, current web technologies have limitations in supporting this, largely because the existing Hypertext Transfer Protocol(HTTP) is unidirectional and does not allow web servers to send messages to their web browsers without first receiving requests from them. This paper proposes an active web server that can overcome such limitations and facilitate synchronous collaboration in web-based group collaborative systems. To accomplish such goals, the active web server manages dependency relationships beween shared data and web browsers referencing them and actively propagates changing details of the shared data to all web browsers referencing them. And, this paper examines usefulness and effectiveness of the active web server to apply it to the ball-bearing design example of concurrent engineering design systems. The prototype system of the active web server is developed on a commercial Object-oriented Database Management System(0DBMS) called OBJECTSTERE using the C++ programming language.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.12
• /
• pp.698-704
• /
• 2005

Passive suspensions with fixed design constants are very restrictive in the inherent suspension problem, the trade-off between the ride quality and the suspension travel. Active suspensions are used to solve some drawbacks of passive suspensions. In this paper, we propose a controller design for vehicle active suspensions considering variable driving conditions. Our controller estimates the current driving conditions by detecting the road frequencies gotten from Fourier Transform and decides which factor must be emphasized between the ride quality and the suspension travel. In one case of focusing on the ride quality, we use the skyhook control law and in the other case of focusing on the suspension travel, the double skyhook control law is used. The control law modified by various road situations outputs the reference force value the electro-hydraulic actuator in active suspension system must generate. To track the reference force, we adopt the sliding control law which is very useful in controlling the nonlinear system like the electro-hydraulic actuator.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.468-477
• /
• 2014

This study proposes an optimized design of a dual active bridge converter for a low-voltage charger in a military uninterrupted power supply (UPS) system. The dual active bridge converter is among various bi-directional DC/DC converters that possess a high-efficiency isolated bi-directional converter. In the general design, the zero-voltage switching(ZVS) region is reduced when the battery voltage is high. By contrast, efficiency is low because of high conduction losses when the battery voltage is low. Variable switching frequency is applied to increase the ZVS region and the power conversion efficiency, depending on battery voltage changes. At the same duty, the same power is obtained regardless of the battery voltage using the variable switching frequency. The proposed method is applied to a 5 kW prototype dual active bridge converter, and the experimental results are analyzed and verified.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.95-100
• /
• 2022

In this paper, a power loss analysis technique of a high-frequency transformer of a bidirectional DAB (Dual Active Bridge) converter is reported. To miniaturize the transformer of the dual active bridge converter, a resonant inductor was designed with an air gap included low-coupled rate state core to combine leakage inductor with the resonant inductor which is required for soft-switching. In this paper, leakage inductance and magnetizing inductance, core material, type of winding and winding method are included in the dual active bridge transformer loss analysis process to enable optimal design at the initial design stage. Transformer loss analysis for dual active bridge with a switching frequency of 200 kHz and maximum output of 5 kW was executed, and elements necessary for design based on the number of turns on the primary side were graphed while maintaining the transformer turns ratio and window area. In particular, it was possible to determine the optimal number of turns and thickness of the transformer, and ultimately, the total loss of the transformer could be estimated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2361-2367
• /
• 2011

In this paper survey and analysis of recent trends in noise barriers and noise measurements and assessments were conducted for providing design basis of ANC barriers. Looking at the results, transparent barrier(glass) has received the most attention in domestic and foreign countries, because it has a harmony with the surrounding environment and easy installation in a small space. For optimal barrier design using computer simulation, reliability of simulation has been verified and classified into 5 groups, according to barrier's upper cross section. Evaluation results of barrier's performance and design using computer simulation are as follows : In the case of the "B-type" barrier, it has improved maximum 2.5dB(A) at each point(R1~R6) and have a good workability. Therefore, "B-type" Barriers applied to the next active noise barrier system will be possible.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.194-197
• /
• 2001

In this paper, the design method of LCL filter at the AC input side of a voltage fed active power filter is proposed. The characteristics of harmonics suppression and current control performance of active power filter are described using the analysis of the relation of these characteristics and DC voltage, switching frequency, and AC inductor values. The design examples are shown and the validity of the proposed design method is verified through the PSIM simulation.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.346-348
• /
• 2005

In this paper, we designed a vehicle active suspension controller. Vehicle suspensions have various design objects with tradeoff among them and these objects cannot be satisfied under all driving conditions. We need to design a controller adapted to variable driving conditions changing the objects of vehicle suspensions. To design such a controller, we must be able to detect the current driving conditions and focus on the road frequencies giving us useful and important information about driving conditions. Detecting the road frequencies, we use the Fourier Transform. A unexpected driving change like a speed bump was also included to items the new designed controller must consider.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.137.4-137
• /
• 2001

Omni-directional mobile robots have been employed popularly in several application areas. However, the optimal design has not been considered yet. This paper introduces an optimal design methodology for omni-directional mobile robots. Optimal design parameters such as the offset distance and the wheel radius are identified with respect to isotropy. Furthermore, the force transmission ratio and actuator sizing problem are treated. Conclusivel, three cases are compared minimum actuation, two active caster wheel, and three active caster wheel, we claim that the redundantly actuated mobile robot with three active caster wheel has the best performance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.63-68
• /
• 2016

This research investigates the deployment time of an active hood lift system(AHLS) activated a gunpowder actuator for the passenger vehicle. The deployment time of the system is investigated by changing the principal design parameters of the system. In order to achieve this goal, after introducing the geometric structure and operating principle of the AHLS, the dynamic equations of the system are formulated for deploying motion. Subsequently, using the dynamic equations, the deployment time of the system is determined by changing several geometric design parameters such as location of actuator. It is then identified which design parameters are main factors to affect the deployment time of AHLS.