• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.414-423
• /
• 2015

Array error analysis and correction of active array antenna are described in this paper. Array elements composed of radiator and TR(Transmit & Recive) module have error(magnitude and phase difference among array elements) which affects SLL(Side Lobe Level). Error affectedness level depends on ideal SLL according to antenna aperture weighting, number of array elements and antenna effective aperture. To satisfy required SLL, correction of array elements is necessary; adopted differently per errors, and weighted differently per shapes of antenna and required SLL. Errors of every individual element had been defined, performance of the antenna with or without error correction had been estimated and proved through near field test.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.534-542
• /
• 2019

In active SONAR, several different methods are used to detect range-Doppler information of the target. Compressive sensing based method is more accurate than conventional methods and shows superior performance. There are several compressive sensing algorithms for range-Doppler estimation of active sonar. The ability of each algorithm depends on algorithm type, mutual coherence of sensing matrix, and signal to noise ratio. In this paper, we compared and analyzed computational performance and accuracy of various compressive sensing algorithms for range-Doppler estimation of active sonar. The performance of OMP (Orthogonal Matching Pursuit), CoSaMP (Compressive Sampling Matching Pursuit), BPDN (CVX) (Basis Pursuit Denoising), LARS (Least Angle Regression) algorithms is respectively estimated for varying SNR (Signal to Noise Ratio), and mutual coherence. The optimal compressive sensing algorithm is presented according to the situation.

• Journal of KIISE:Software and Applications
• /
• v.26 no.12
• /
• pp.1393-1403
• /
• 1999

공간 데이타베이스 시스템을 통하여 공유되는 공간 데이타는 무결성이 적절하게 유지되지 않는 한 전체 응용 시스템의 행위를 예측할 수 없게 되므로 데이타의 무결성 확인 및 유지는 필수적이다. 특히 공공 GIS에 저장된 공간 데이타는 토지 이용도 평가, 도시 계획, 자원 관리, 시설물 관리, 안전 관리, 국방 등 국가 전체 및 지역의 중요한 정책 결정을 위한 다양한 응용 시스템들에 의해 이용되므로 적절한 공간 객체의 무결성 확인이 더욱 더 필요하다. 본 논문에서는 능동(active) DBMS의 능동 규칙(active rule) 기법을 이용하여 공간 객체의 무결성 확인을 지원하기 위한 규칙 관리 시스템을 제시한다. 능동 규칙을 이용한 공간 객체의 무결성 확인은 응용 프로그래머를 무결성 확인에 대한 부담으로부터 자유롭게 할 수 있다. 본 시스템은 특정 DBMS에 종속되지 않는 독립적인 외부 시스템으로 존재하며, 능동 규칙 관리기, 규칙 베이스, 그리고 활성규칙 생성기의 3 부분으로 구성된다. 사용자가 공간 데이타베이스 응용 프로그램을 통해 공간 객체를 조작하고자 할 때, 본 시스템은 데이타베이스 트랜잭션을 단위로 조작되는 모든 공간 객체의 무결성 확인을 위해 응용 프로그램에 삽입될 무결성 제약조건 규칙들을 효율적으로 관리하는 역할을 한다.Abstract It is necessary that the integrity of spatial data shared through the spatial database system is validated and appropriately maintained, otherwise the activity of whole application system is unpredictable. Specially, the integrity of spatial data stored in public GIS has to be validated, because those data are used by various applications which make a decision on an important policy of the region and/or whole nation such as evaluation of land use, city planning, resource management, facility management, risk management/safety supervision, national defense. In this paper, we propose rule management system to support validating the integrity of spatial object, using the technique of active rule technique from active DBMS. Validating data integrity using active rules allows database application programmer to be free from a burden on validation of the data integrity. This system is an independent, external system that is not subject to specific DBMS and consists of three parts, which are the active rule manager, the rule base, and the triggered rule generator. When an user tries to manipulate spatial objects through a spatial database application program, this system serves to efficiently manage integrity rules to be inserted into the application program to validate the integrity constraints of all the spatial objects manipulated by database transactions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.23-32
• /
• 2008

In the VHF range, active antennas are widely used for wideband applications due to their small size. Active antenna consists of antenna elements and amplifiers, which are directly connected to each other. Gain and noise-figure characteristics are very important for good sensitivity performance, because it is located at the front end of a receiving system. In this study, we developed an active dipole antenna with 5:1 bandwidth(100${\sim}$500 MHz), which consists of a dipole antenna and a P-HEMT amplifier. To obtain required performances, the antenna and the amplifier should be designed simultaneously. In order for that, we introduced an equivalent port concept to model the 1-port dipole antenna as an equivalent 2-port system. Using the proposed equivalent port, the performance of the active dipole antenna was simulated by the ADS. In order to measure the gain and noise-figure characteristics of the antenna, we utilized the same concept of the two-port equivalent impedance model. The measurement results for typical gain, NF and VSWR in the required frequency band were 8dBi, 9dB and 1.7:1, respectively. The radiation patterns at the principal planes were same as the typical radiation pattern of a dipole antenna. By comparing the simulation results with measured ones, it is confirmed that the proposed methods works well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.573-582
• /
• 2010

In this paper, X-band transceiver for high resolution wideband SAR systems is designed and fabricated. Also as a technique for enhancing the performance, error compensation algorithm is presented. The transceiver for SAR system is composed of transmitter, receiver, switch matrix and frequency generator. The receiver especially has 2 channel mono-pulse structure for ground moving target indication. The transceiver is able to provide the deramping signal for high resolution mode and select the receive bandwidth for receiving according to the operation mode. The transceiver had over 300 MHz bandwidth in X-band and 13.3 dBm output power which is appropriate to drive the T/R module. The receiver gain and noise figure was 39 dB and 3.96 dB respectively. The receive dynamic range was 30 dB and amplitude imbalance and phase imbalance of I/Q channel was ${\pm}$0.38 dBm and ${\pm}$3.47 degree respectively. The transceiver meets the required electrical performances through the individual tests. This paper shows the pulse error term depending on SAR performance was analyzed and range IRF was enhanced by applying the compensation technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.119-126
• /
• 2014

An experimental study was conducted to study fuel injection characteristics through plain orifice injectors when the fuel was heated to the temperature higher than its boiling point. Three injectors with different orifice diameters were used to measure the flow coefficient (${\alpha}$) for the injection pressure ranges of 3, 5, and 10 bar and the fuel temperature ranges between 50 and $270^{\circ}C$. The study showed that ${\alpha}$ decreases gradually with the fuel temperature below $180^{\circ}C$ while it drops abruptly when the temperature goes beyond $187^{\circ}C$, the boiling temperature of the fuel. The slope of ${\alpha}$ bifurcated at the boiling temperature for different injection pressures, and ${\alpha}$ decreased faster for the lower injection pressure due to the more active boiling in the injector. In addition, the larger orifice diameter had the higher ${\alpha}$ value, and ${\alpha}$ jumped at moderate temperature ranges when the injection pressure was low, implying the turbulent-laminar transition phenomena. The measured ${\alpha}$ was plotted against the cavitation number($K_c$), and the characteristics were independent of the applied pressure for small injectors when the fuel was evaporated before it was injected.

• The Plant Pathology Journal
• /
• v.30 no.4
• /
• pp.343-354
• /
• 2014

Rice blast disease caused by Magnaporthe oryzae is one of the most serious diseases of cultivated rice (Oryza sativa L.) in most rice-growing regions of the world. In order to investigate early response genes in rice, we utilized the transcriptome analysis approach using a 300 K tilling microarray to rice leaves infected with compatible and incompatible M. oryzae strains. Prior to the microarray experiment, total RNA was validated by measuring the differential expression of rice defense-related marker genes (chitinase 2, barwin, PBZ1, and PR-10) by RT-PCR, and phytoalexins (sakuranetin and momilactone A) with HPLC. Microarray analysis revealed that 231 genes were up-regulated (>2 fold change, p < 0.05) in the incompatible interaction compared to the compatible one. Highly expressed genes were functionally characterized into metabolic processes and oxidation-reduction categories. The oxidative stress response was induced in both early and later infection stages. Biotic stress overview from MapMan analysis revealed that the phytohormone ethylene as well as signaling molecules jasmonic acid and salicylic acid is important for defense gene regulation. WRKY and Myb transcription factors were also involved in signal transduction processes. Additionally, receptor-like kinases were more likely associated with the defense response, and their expression patterns were validated by RT-PCR. Our results suggest that candidate genes, including receptor-like protein kinases, may play a key role in disease resistance against M. oryzae attack.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1401-1407
• /
• 2019

To elucidate whether or not solvent-tolerant bacteria use anti-oxidative defense systems to defend themselves against toxic solvents, oxidative enzyme activity and total anti-oxidative capacity (T-AOC) were investigated in two tolerant strains of Pseudomonas sp. under toluene stress. The superoxide dismutase (SOD) activities of solvent tolerant BCNU 106 exhibited relatively increased levels at a toluene concentration of 100 mg/l, where those of solvent tolerant BCNU 171 increased at 200 mg/l. A greater than three-fold increase in catalase (CAT) levels was observed at concentrations of 200 and 300 mg/l in BCNU 106, and a two-fold increase was monitored at the same concentrations in BCNU 171. High glutathione S-transferase (GST) levels were also observed in the solvent tolerant bacteria. Higher levels of T-AOC was expressed in the solvent tolerant strains than in the ordinary non-tolerant KACC 10266. The highest plateau of SOD in BCNU 171 was observed at 1 hr of toluene exposure. CAT levels plateaued at 1 hr and 14 hr in BCNU 106 and reached the highest plateau at 3 hr in BCNU 171. The highest peak of T-AOC occurred at 9 hr in BCNU 106, and two high peaks occurred in BCNU 171, at 1 hr and at 9 hr of toluene exposure. The solvent-tolerant bacteria showed active antioxidant responses and could survive under harsh environments, including the presence of solvents, through means of antioxidant defense systems.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.161-166
• /
• 2014

In this study, effects of pyrite ($FeS_2$) particle sizes on the electrochemical characteristics of thermal batteries are investigated using unit cells made of pulverized pyrite by ball-milling. At $450^{\circ}C$ unit cell discharge test, the electrochemical capacity of $1.46{\mu}m$ pyrite-cell largely increases compared to $98.4{\mu}m$ pyrite-cell, and their internal resistances also decrease. These results are attributed to the increase in the active reaction area of pyrite by ball milling. However, at $500^{\circ}C$ unit cell discharge test, a $1.46{\mu}m$ pyrite cell shows lower internal resistance than that of $98.4{\mu}m$ pyrite cell only at Z-phase region ($FeS_2{\rightarrow}Li_3Fe_2S_4$). After that, a $1.46{\mu}m$ pyrite cell shows a decrease in the cell voltage and an rapid increase of the internal resistance in J-phase region ($Li_3Fe_2S_4{\rightarrow}LiFe_2S_4$) is observed compared to those of $98.4{\mu}m$ pyrite cell. It can be concluded that at the higher temperature, the thermally unstable pulverized pyrite is decomposed thermally as well as self discharged, simultaneously, which causes the higher resistance and lower capacity at $500^{\circ}C$ in J-phase than that of $98.4{\mu}m$ pyrite cell.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.8-17
• /
• 2018

A large urban region in Bangkok, Thailand is often inundated due to shallow water floods along the paved roads that have poor drainage facilities, and that can cause urban flooding. Existing methods, including using sand bags are not effective to prevent flooding in urban areas where the amount of sand is not sufficient. Thus, it is necessary to install artificial flood defense structures. However flooding and overflow defense equipment, which was developed in some advanced nations in Europe and in the USA, is highly expensive and complex construction methods are needed, therefore they are not suitable to be used in Southeast Asia. Thus, it is necessary to develop a flood rapid defense system(FRDS), which is inexpensive and simple to build, but is also highly functional. Thus, this study developed an FRDS that can be applied to Southeast Asia through the careful study of FRDS overviews, an analysis on the development trends in Korea and overseas, and the proposal of development needs and directions of the region. For the system developed, Korean Standards(KS) performance evaluations on leakage ratio deformation tests and impact resistance tests were conducted at the Outdoor Demonstration Test Center(Seosan) in the Korea Conformity Laboratories(KCL) and the system satisfied the standards of KS F 2639(leakage and deformation test) and KS F 2236(impact resistance test). The present study results can not only be applied to urban floods in Southeast Asian nations to cope with flood-related disasters, but also be utilized in flood prone regions and for major facilities in Korea. They can also induce scientific and pro-active responses from major local governments and facility management organizations in relation to urban floods.