• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2021

In multi-string light-emitting diode (LED) driver system, current balancing is crucial because the brightness of LED is directly related to its forward current. This paper presents a novel LED current balancing topology using current-fed Z-source converter. With the proposed structure, currents flowing through two LED strings are automatically balanced owing to the charge-balance condition on capacitors. Operation of the proposed converter is simple and the proposed converter uses only one active switch and one diode. Moreover, low-side gate driving can be used to operate the active switch. To verify the operation of the proposed LED current balancing converter, a prototype is built and tested with different numbers of LEDs.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.228-229
• /
• 2010

This paper presents an active voltage balancing approach using a forward fly-back power converter. In the proposed balancing scheme, cell with the higher voltage is selected to extract the extra energy and then a proportion of this extracted energy is distributed to other supercapacitors via the proposed circuit. A system structure consisting of five supercapacitors is built up to verify operation of the proposed scheme.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.1
• /
• pp.9-17
• /
• 2022

The series-connected semiconductor devices structure is one way to achieve a high voltage rating. However, a problem with voltage imbalance exists in which different voltages are applied to the series-connected switches. This paper proposed a new voltage balancing technique that controls the turn-off delay time of the switch by adding one bipolar junction transistor to the gate turn-off path. The validity of the proposed method is proved through simulation and experiment. The proposed active gate driver not only enables voltage balancing across a variety of current ranges but also has a greater voltage balancing performance compared with conventional RC snubber methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.58-65
• /
• 2015

This paper presents the design of an implantable stimulation IC intended for neural prosthetic devices using $0.18-{\mu}m$ standard CMOS technology. The proposed single-channel biphasic current stimulator prototype is designed to deliver up to 1 mA of current to the tissue-equivalent $10-k{\Omega}$ load using 12.8-V supply voltage. To utilize only low-voltage standard CMOS transistors in the design, transistor stacking with dynamic gate biasing technique is used for reliable operation at high-voltage. In addition, active charge balancing circuit is used to maintain zero net charge at the stimulation site over the complete stimulation cycle. The area of the total stimulator IC consisting of DAC, current stimulation output driver, level-shifters, digital logic, and active charge balancer is $0.13mm^2$ and is suitable to be applied for multi-channel neural prosthetic devices.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1083-1095
• /
• 2023

Recently, the demand for low-voltage, high-capacity ESS is rapidly increasing due to the revitalization of the e-mobility industry, which is mainly powered by electricity. In addition, the demand for portable power banks is rapidly increasing due to the revitalization of leisure industries such as camping and fishing. The ESS with this structure consists of a small number of series cells and many parallel cells, resulting in a system with a large rated current. Therefore, the number of power devices for cell balancing configured in series is small, but a balancing device with a large current capacity is required. Construction of a constant temperature device in such a low-voltage, high-current ESS is difficult due to economic issues. The demand for an active balancing system that can solve the passive balancing heating problem is rapidly increasing. In this paper, propose a power feedback fly-back topology that can solve the balancing heating problem. The characteristic of the proposed topology is that a series-connected voltage sharing voltage is used as the input of the flyback converter, and the converter output is connected to one transformer. In this structure, the converter output for cell voltage balancing shares magnetic flux through one high-frequency transformer, so the cell voltage connected to the converter automatically converges to the same voltage.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.151-162
• /
• 1997

Chemical application is one of the most important field operation in rice production. Rolling of a boom due to local unevenness and softness in fields causes a local under/over-application of spray. In this study, the vertical movement of boom tips due to unevenness of ground in paddy fields was investigated, and an active pendulum suspension control system was designed and tested for compensating the movement and balancing the boom to the ground. The results for testing the performance of the control system showed that the system could balance the boom both in flat and inclined fields. The active pendulum control system developed in this study could be properly used for improving spraying performance of a boom sprayer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.146.1-146.1
• /
• 2010

최근 전력 수요의 증가와 지구 온난화 문제가 화두가 되면서 피크 전력관리와 스마트 그리드의 필요성이 강조되고 있다. 이들을 구현하기위해 반드시 필요한 것이 에너지 저장 시스템이다. 본 발표는 배터리 에너지 저장 시스템에 사용되는 능동형 셀 발란싱 기능을 갖는 배터리 관리 시스템에 관한 것이다. 전력 에너지 저장용 배터리는 원하는 전압과 전력을 저장하기위해 단전지(Cell)들을 보통 수천 개가 직렬 병렬로 연결되어 구성된다. 배터리팩을 구성하는 단전지 한 개의 용량이 다른 단전지 보다 크거나 작던지 또는 한 개의 단전지에 문제가 생기면 배터리팩 전체의 성능이 저하되든가 또는 사용 할 수가 없게 된다. 따라서 배터리팩을 구성 할 때는 용량이 동일 한 단전지들을 사용한다. 에너지 저장용 배터리팩에는 수백 와트의 단전지 들이 사용되므로 에너지 저장용 배터리팩을 위한 단전지 생산에는 많은 어려움이 있다. 능동형 셀 발란싱 기술을 사용 하면 이러한 배터리팩의 문제를 해결 할 수 있어 셀 제조원가를 절감 할 수 있을 뿐만 아니라 배터리팩의 가용용량을 늘릴 수 있고 또한 배터리팩의 수명을 연장 할 수 있다.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.51-56
• /
• 2008

A combination of VPNs and dial-up access, such as DSL and Cable, usually provides the cost-effective solution as the substitution of private networks on high-cost leased line. The business demand for high availability has increased with VPN spreading. This paper presents the schemes for a high availability of network access and a load balancing of network traffic in VPN gateways by using multiple links or multihoming capability based on active-active approach. The high availability and load balancing of network links can be achieved by duplicating external network access into multiple independent links. This can provide a continuous network connection to internal users even if one of the links is failed. Moreover, it can provide twice network bandwidth by distributing the traffic into the links. Static and dynamic algorithms are proposed as the load balancing algorithms.

• Journal of TMJ Balancing Medicine
• /
• v.5 no.1
• /
• pp.20-26
• /
• 2015

Four cases of functional cerebrospinal therapy (FCST) were reviewed to see whether any improvement is observed in the X-ray images of open-mouth view and cephalocervical views. Intraoral appliances of TMJ balancing appliance (TBA) and cervical balancing appliance (CBA) and active movement of within range-of-movement of the jaw and the neck were applied to each patient. Improved balance of $2^{nd}$ cervical vertebra position and cervical alignment were observed in all the four cases.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.379-384
• /
• 2012

This paper presents the power source of wireless sensor node (WSN) using supercapacitors and a solar cell. Supercapacitors have high lifetime cycling compared to that of batteries. Supercapacitors are connected in series to achieve higher voltage and a voltage balancing circuit is required to ensure that no individual cell goes overvoltage. We employ an active balancing circuit that draws minimal current by using transistors. A diode is connected in series with each supercapacitor. A new balancing circuit that equalize the cells-voltage reduces energy consumption of supercapacitors. Voltage of operating WSN is applied 2.2-3.3V by DC/DC converter and supercapacitor voltage 2.2-5.1V. Maximum operating time of wireless sensor node is about 16 hours in full charging.