• 한국연초학회지
• /
• 제16권2호
• /
• pp.181-190
• /
• 1994

Various active carbons were made from plant sources of coconut shell, pine tree, oak tree and lignite coal. Pore characteristics of these adsorbents were investigated. 1, With increasing activation time, specific surface area and pore volume increased, but the development of micropores was limited at a certain level. The average pore diameter, by BET, of coconut active carbon was 15.5-21.8$\AA$ and that of lignite carbon was 15.6-31.3$\AA$. The pore diameters of silica-gel, sepiolite and zeolite was 30.9$\AA$, 58.6$\AA$ and 55.7$\AA$, respectively. 2. The Horvath - Kawazoe micropore diameter of coconut shell active carbon was under 10.5$\AA$ and that of the other active carbon was under 20.9$\AA$ but silica-gel 33$\AA$, sepiolite 103 $\AA$ and zeolite was unexpectedly large to be 175$\AA$. From the difference between BET micropore diameter and Howath - Kawazoe diameter, it could be said that silica - gel has comparatively uniform pore diameter but sepiolite and zeolite have very uneven diameter. 3. Total pore volume of coconut shell active carbon was 0.27-1.04 cm3/g but that of the other active carbon, 0.23-0.62 cm3/g, was much lower than that of coconut shell active carbon. Hydrophilic adsorbent silica - gel and sepiolite showed big difference in specific surface area, but pore volumes of these were 0.47 and 0.56 cm3/g showing similar value and micropore volumes of these were, respectively, 0.06 cm3/g and 0.04 cm3/g. Total pore volume of zeolite was 0.1 cm3/g and that of micropore was only 0.02 cm3/g.

• 지구물리
• /
• 제9권3호
• /
• pp.219-230
• /
• 2006

Since the key issue that 'the Yangsan fault is seismically an active fault" was raised in 1983, thegeological and geomorphological studies of active fault have been made by many researchers. These studies are mainly focused on the Yangsan fault system(YFS) and Ulsan fault system(UFS) due to many historical earthquakes occurred in this area. There are two different types of active faultings under the ENE-WSW horizontal stress field in the southeastern part of the Korean Peninsula. The NNE-trending YFS is the most prominent right-lateral strike-slip fault and has a continuous trace about 200 km long. Some part of this system has been active during the late Quaternary with evidences clearly recognized on both the northern (Yugyeri and Tosung-ri areas) and southern parts (Eonyang to Tongdosa area) of the YFS. in the southern part, the estimated vertical slip rate is about 0.02 - 0.07 mm/yr, and the lateral slip rate may be several times larger than the vertical rate. The most recent event occurred prior to deposition of Holocene alluvium, in the northern part, the fault trend locally changes to almost N-S, dips to the east and has reverse movement. The average vertical slip rate is estimated to be less than 0.1 mm/yr. The most recent event probably occurred after 1314 years BP (AD 536). The NNW-SSE (or N-S) trending UFS is a predominantly reverse fault that built up U-ie eastern mountain and has been active during U-ie late Quaternary. The fault trace is not straight but irregularly undulates along the foot of the mountain on the east. From the disturbed terraces along U-ie fault, the average vertical slip rate on U-iis system is estimated to be about 0.08.13mm/yr. The latest event is not well studied, but seems to have occurred after the last glacial maximum in the Malbang fault and 14,000 years BP in the Kalgok fault of the UFS. However, important issues such as fault segmentation, recurrence interval, age of Quaternary deposits need further studies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.575-576
• /
• 2009

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1996년도 추계학술대회발표논문집; 고려대학교, 서울; 26 Oct. 1996
• /
• pp.214-217
• /
• 1996

Early decision support systems (DSS) were the "passive" decision support systems in the sense that the systems only able to do what the users explicitly direct them to do. But some researchers such as Raghav Rao et al. [51 showed architectures to suggest general idea of the innovative DSS systems which offer active form of decision support, say, "active Intelligent Decision Support Systems(active IDSS)". The system can perform not only what the users want to do but some voluntary (or involuntary) intelligent works. This paper presents the issues in the design of the active IDSS in the domain of investment evaluation, a domain area where few researchers have suggested frameworks or architectures to discriminate good investment from bad one. We propose a new paradigm, by utilizing historical investment results using neural network and Multivariate Discriminant Analysis(MDA), to identify goodness of investment. A new active IDSS architecture which consists of neural network, expert system and three components of the traditional passive DSS is suggested with some scenario based results.nario based results.

• 한국통신학회논문지
• /
• 제4권1호
• /
• pp.25-31
• /
• 1979

All the resitors in the active RC filter networks can be relplaced by the switched capacitors. Therefore, An SC filter circuit can be fully integrated using MOS technology. A switched capacitor is much better than a resistor in temperature and linearity characteristics, and the former can be fabricated on the much smaller area then the latter. In this paper, It is given the generalized disign method of the active SC filter from the active RC filter using Bilinear Z-transformation. By SC filtering Techniques using Bilinear Z-transform, It enalbes us to realize the FDNR and Gyrator filters, which could not be realized in the exsisting designs, and it permits the processing of signals at much higher frequenies that many previous designs do. Experiments show that the response of the SC active filter is similiar to that of its prototype active RC filter.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.94-102
• /
• 2003

본 연구에서는 능동 데이터베이스를 이용하여 배전선로의 운전을 자동화하는 방안을 제시하였다. 기존의 선로운 전자동화 시스템에서는 수동형 데이터베이스를 사용으로 인위에 의한 실수로 광역정전 또는 과부하 구간의 파급등이 발생될 우려가 있었다. 그러나 제시된 능동 데이터베이스는 선로운전 자동화 시스템 데이터베이스의 상태를 항상 감시하고 스위치의 상태나 계통의 전류 또는 부하량이 변경되었을 경우 그에 상응하는 일련의 작업을 사용자의 개입없이 능동 규칙이용하여 데이터베이스 스스로 수행하도록 함으로써 인위에의한 실수를 최소화 할 수 있다. 제시된 방식을 실 계통인 서울의 K지점의 모의 배전계통에 적용하여 그 유용성을 입증하였다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.480-487
• /
• 2015

In this study, several kinds of active carbons with high specific surface area and micro pore structure were prepared from the coconut shell charcoal using chemical activation method. The physical property of prepared active carbon was investigated by experimental variables such as activating chemical agents to char coal ratio, flow rate of inert gas and temperature. It was shown that chemical activation with KOH and NaOH was successfully able to make active carbons with high surface area of $1900{\sim}2500m^2/g$ and mean pore size of 1.85~2.32 nm. The coin cell using water-based binder in the electrolyte of LiPF6 dissolved in mixed organic solvents (EC:DMC:EMC=1:1:1 vol%) showed better capacity than that of oil-based binder. Also, it was found that the coin cell of water-based binder shows an improved cycling performance and coulombic efficiency.

• 한국식생활문화학회지
• /
• 제21권3호
• /
• pp.344-350
• /
• 2006

The study aims to examine whether regular leisure activity of the elderly with active and passive types has a beneficial effect to enhance their health condition. The elderly subjects of 164 (82 of elderly who do active leisure and 82 of elderly who do passive leisure) aged over 60 years in Suwon area were employed. Survey questionnaires were administered to investigate general characteristics, life style, and health status along with anthropometric measurement. From the findings, the elderly who do active leisure were highly educated and better in living status. The elderly who do passive leisure showed higher drinking and smoking rates as well as higher obesity and overweight rates in comparison to the other counterpart. Furthermore, the elderly who do passive leisure were poor in health status. 'Painful knee and eye', 'lower back pain', and 'fatigue' were the most prevalent among subjective symptoms of the elderly. In conclusion, the elderly with active leisure activity seemed to have better life style and maintain good health status. Therefore, it is critically important to establish the health program combined with various leisure activity for the seniors to promote and energize the later years of life.

• 한국정보과학회논문지:정보통신
• /
• 제31권5호
• /
• pp.482-489
• /
• 2004

Mobile IP에서 이동노드의 불필요한 위치 등록으로 인하여 발생되는 네트워크 시그널링 오버헤드를 줄이고자 IETF에서는 IP 페이징 기법을 제안하였다. IP 페이징 기법을 지원하기 위하여 이동노드는 active on, active off, idle 중 한가지 상태를 유지하여야 한다. Active on 상태는 이동노드에 데이터 세션이 형성되어 데이타를 수신하거나 또는 송신하는 상태를 말한다. 이때 이동노드가 데이타의 송수신을 완료하고 나면 이동노드는 active off 상태로 바뀌게 되며 active timer를 구동한다. 그 후 일정시간 동안 이동노드가 데이타를 송수신하지 않고 페이징 영역 간 이동이 발생하지 않으면 active timer가 만료된다. 이때 이동노드의 상태는 idle 상태로 바뀌게 된다 기존의 IP 페이징 기법에서는 고정된 active timer 값을 사용하고 있으나 본 논문에서는 이동노드의 이동성 및 트래픽 특성에 따라 active timer 값을 동적으로 설정하여 불필요한 위치갱신 작업을 줄일 수 있는 IP 페이징 기법을 제안한다. 또한 본 논문의 제안기법과 기존의 IP 페이징 기법간의 위치 갱신 및 페이징 비용에 대한 수학적 모델을 수립하고 성능평가를 수행한다. 이를 이용하여 성능 분석을 수행한 결과 기존 기법에 비하여 제안 기법이 보다 효율적임을 보여주고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.157-160
• /
• 2007

The catalyst layer of a proton exchange membrane (PEM) fuel cell is a mixture of polymer, carbon, and platinum. The characteristics of the catalyst layer play critical role in determining the performance of the PEM fuel cell. This research investigates the role of catalyst layer composition using a Central Composite Design (CCD) experiment with two factors which are Nafion content and carbon loading while the platinum catalyst surface area is held constant. For each catalyst layer composition， polarization curves are measured to evaluate cell performance at common operating conditions, Electrochemical Impedance Spectroscopy (EIS), and Cyclic Voltammetry (CV) are then applied to investigate the cause of the observed variations in performance. The results show that both Nafion and carbon content significantly affect MEA performance. The ohmic resistance and active catalyst area of the cell do not correlate with catalyst layer composition, and observed variations in the cell resistance and active catalyst area produced changes in performance that were not significant relative to compositions of catalyst layers.