• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.10-14
• /
• 1978

There are relatively many reports have been issued on he active movement of cuticle of larva. which tend to protect their body, however, only a few reports have been disclosed on the cuticle of pupal body except the small portion of rectangle which shown tortoise-shell shape. In this connection, many portion of the external structure of pupal cuticle has been studied and the following. results were found: 1) No. spot of rectangle which is sculptured in the surface of cuticle that born by branching. out of the development of cell in imaginal bud of antenna and head were found. However, in the compound eye of net shaped sculpture was found in the (equation omitted) shaped parts which holding. the diameter of about 8u and the surrounding area has the small bump and the one is dark brown coloured comparing with shape. 2) The sculpture shape of thorax is a little different than in the head. However, (equation omitted) portion is varies from the segment to segment. In general, it is not very clear than the compound eye in the head, the dark brown bump shape is slowly fade a from the prothorax, mesothorax to metathorax. 3) The surface of intersegment membrane is colourless or slightly yellow, and the entire surface has stripped marking with thine lines. 4) In the abdominal segment, there are many and small sculptures in net shape around the (equation omitted) shape portions. 5) The size of sculpture in (equation omitted) portion of abdomen is smaller than one in thorax, and in the same segment, the dorsal is smaller than abdomen and the rear portion of the segment is larger than the front of segment. 6) After the 7th abdominal segment, no intersegmental membrane is found and the cuticle of the external structure is the same as external structure of the segment. 7) The seta is not found in head, compound eye, antenna and wing which portions were subdivided by development of imagined bud of the cell, no seta is found in cuticle of the segment in the general cell of the larva stage and also in the dorsal and intersegmental membrane.

• Journal of The Korean Association For Science Education
• /
• v.41 no.5
• /
• pp.371-390
• /
• 2021

The purpose of this study is to develop a neuropsychological model for the spatial ability factor and to divide the brain active area involved in the light & shadow problem solving process into the domain-general ability and the domain-specific ability based on the neuropsychological model. Twenty-four male college students participated in the study to measure the synchronized eye movement and electroencephalograms (EEG) while they performed the spatial ability test and the light & shadow tasks. Neuropsychological model for the spatial ability factor and light & shadow problem solving process was developed by integrating the measurements of the participants' eye movements, brain activity areas, and the interview findings regarding their thoughts and strategies. The results of this study are as follows; first, the spatial visualization and mental rotation factors mainly required activation of the parietal lobe, and the spatial orientation factor required activation of the frontal lobe. Second, in the light & shadow problem solving process, participants use both their spatial ability as a domain-general thought, and the application of scientific principles as a domain-specific thought. The brain activity patterns resulting from a participants' inferring the shadow by parallel light source and inferring the shadow when the direction of the light changed were similar to the neuropsychological model for the spatial visualization factor. The brain activity pattern from inferring an object from its shadow by light from multiple directions was similar to the neuropsychological model for the spatial orientation factor. The brain activity pattern from inferring a shadow with a point source of light was similar to the neuropsychological model for the spatial visualization factor. In addition, when solving the light & shadow tasks, the brain's middle temporal gyrus, precentral gyrus, inferior frontal gyrus, middle frontal gyrus were additionally activated, which are responsible for deductive reasoning, working memory, and planning for action.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Clean Technology
• /
• v.24 no.4
• /
• pp.371-379
• /
• 2018

The objective of this study is to develop a platinum/hexaaluminate pellet catalyst for the decomposition of eco-friendly liquid propellant. Pellet catalysts using hexaaluminate prepared by ultrasonic spray pyrolysis as a support and platinum as an active metal were prepared by two methods. In the case of the pellet catalyst formed by loading the platinum precursor onto the hexaaluminate powder and then adding the binder (M1 method catalyst), the mesopores were well developed in the catalyst after calcination at $550^{\circ}C$. However, when this catalyst was calcined at $1,200^{\circ}C$, the mesopores almost collapsed and only a few macropores existed. On the other hand, in the case of a catalyst in which platinum was supported on pellets after the pellet was produced by extrusion of hexaaluminate (M2 method catalyst), the surface area and the mesopores were well maintained even after calcination at $1,200^{\circ}C$. Also, the catalyst prepared by the M2 method showed better heat resistance in terms of platinum dispersion. The effects of preparation method and calcination temperature of Pt/hexaaluminate pellet catalysts on the decomposition of liquid propellant composed mainly of ammonium dinitramide (ADN) or hydroxyl ammonium nitrate (HAN) were investigated. It was confirmed that the decomposition onset temperature during the decomposition of ADN- or HAN- based liquid propellant could be reduced significantly by using Pt/hexaaluminate pellet catalysts. Especially, in the case of the catalyst prepared by the M2 method, the decomposition onset temperature did not show a large change even when the calcination temperature was raised at $1,200^{\circ}C$. Therefore, it was confirmed that Pt/ hexaaluminate pellet catalyst prepared by M2 method has heat resistance and potential as a catalyst for the decomposition of the eco-friendly liquid propellants.

• Journal of Industrial Convergence
• /
• v.1 no.1
• /
• pp.41-70
• /
• 2003

Many researches on brand equity have been focused in definition about it, factors of it, and the process of formation. Most of them have been used by voluntary production category, as is durable goods or nondurable goods. But this study, using the model is developed by Foote, Cone & Be1ding(FCB) Company, classified four fields, high-low involvement, rationality(rational or sensitive) involvement. The selected goods is a sensitive high involvement(casual wear). This study investigate the effects of brand equity and search the influences of brand equity formation according to factors of marketing mix. To this goals, this study kept a literature survey and a demonstrative research. In literature survey, there are several definitions of brand and brand equity. The research model is derived from selected factors of marketing mix and former study. This study used the regression analysis to verify effects from brand equity through the selected marketing mix. The research data is collected from the capital area. The focus of this study is effects of brand equity according to marketing mix. The followings are results and suggestions of this study. First, in the price factors, the affirmative effects are revealed the perceived quality and the brand awareness in a rational high involvement goods, the perceived quality and the brand associations in a sensitive high involvement goods, all factors of brand equity in a rational low involvement goods, and the perceived quality in a sensitive low involvement goods. As summary, the important characteristics is the price factors to consumers, and consumers recognize that a high price means a high quality. Second, in the store image factors, the affirmative effects are revealed all brand equity factors in a rational high involvement and a sensitive high-low involvement. A good store image incites more interest, contact, and visit from potential consumer. And such store offers more consumer satisfaction, simulates more active and positive conversation to consumers. Third, in advertising spending factors, the affirmative effects are revealed the brand awareness and associations in a rational high involvement and a sensitive high involvement, all brand equity factors in a rational low involvement and a sensitive low involvement. An advertisement increases not only a brand awareness but also strong brand associations. Forth, in price promotion factors, the affirmative effects are revealed the brand associations in a rational high involvement, the negative effects are revealed all brand equity in sensitive high involvement. According the result about the effects of brand royalty through the brand equity factors, a perceived quality and brand associations have positive effects to brand royalty in all factors. Consumers choice a deep perceived quality than other competitive brand. So, brand equity will increase according to a qualitative grade of a perceived brand by consumers. Brand associations represent a quality and a degree of involvement. In conclusion, brand associations and equity have a positive relation each other. According to the analysis results about a brand royalty of selected marketing mix factors, the affirmative effects are revealed the store image and price promotion factors in a rational high involvement, the price and store image in a sensitive high involvement, and the price and advertising spending in a rational low involvement. The results about the affect of selected marketing mix factors according to brand equity, are the perceived quality in a high involvement, and all brand equity factors in a low involvement. The affirmative effects about a store image are revealed all equity factors in high-low involvement. In advertising spending factors, the affirmative effects are revealed the brand awareness and associations in a high involvement goods, and the perceived quality and the brand awareness in a low involvement goods. In price promotion factors, the affirmative effects are revealed the brand awareness in a low involvement goods, and the negative effects are revealed the brand awareness in a high involvement goods. According to a degree of involvement, the results of a brand royalty through a brand equity factors are following. The affirmative effects are revealed the perceived quality and the brand royalty in a high involvement goods, and the brand awareness are revealed a negative effect. The affirmative effects are revealed the perceived Quality and the brand associations in a low involvement goods. So, in a high involvement goods, the brand royalty is built by strong brand associations, but, in a low involvement goods, the brand royalty is built also by a perceived Quality and a brand awareness. This study have some concept of limitation. So, this study presents a future direction of research. First, a future study has to have more deep analysis for this study analyzed through a limited marketing mix factors. Second, a future research has to get mutual effects about brand equity of marketing mix factors for this study has an individual marketing decision factors. Third, for the future, a brand equity needs a research about a several goods such as services, profit or nonprofit, industrial products, culture, and so on. Forth, the research have to diversify a various data for population.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.152-171
• /
• 2019

In this study, we analyzed the characteristics of the cold air generated in Hannamgeumbuk and Geumbuk-Jeongmaek and proposed their management strategies. We also suggested management strategies after analyzing detailed cold airflows for Cheongju located Hannamgeumbuk-Jeongmaek and we compared the degree of nighttime temperature reduction of the Jeongmaek by using data obtained from observatories located on Cheongju. We used KALM(Kaltluftabflussmodell), a cold air simulation model developed in Germanay and identified both cold airflows and altitude of cold air layers generated during 360minutes at night. As a result, the cold airflow generated in the Jeongmaek became strong and the cold air was appeared clearly in the western part of the Hannamgeumbuk-Jeongamek and in the northern part of the Geumbuk-Jeongmaek. The average velocity of cold airflow was recorded at 0.45m/s, and the maximum speed of cold airflow was recorded at 2.70m/s. The average height of the cold air layer was 104.27m/s and the maximum thickness was 255.0m. The average velocity of cold airflows in Cheongju was 0.51m/s and the average height of cold air layer was 48.87m high. The highest degree of nighttime temperature reduction appeared in the Cheongnamdae observatory($-3.8^{\circ}C$), where the altitude of the cold air layer is high. The results showed that cooling effect of Jeongmaek actually affected the temperature reduction during nighttime. Based on the results, we designated the main mountain area of the Jeongmaek with active cold air generation as "cold air conservation areas" and proposed the current forest and topography conservation. We also proposed to designate areas that facilitate the cold airflows as "cold air management areas" and to complement the function of Jeongmaek. This study could support the establishment of systematic management plans of the Jeongmaek. In addition, it is expected that the results can be applied as basic data for ventilation paths of Cheongju.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• International Area Studies Review
• /
• v.22 no.1
• /
• pp.215-235
• /
• 2018

Policy concerns related to raising fertility rates are not only common interests among the OECD countries, but they are also issues of great concern to South Korea whose fertility rate is the lowest in the world. The fertility rate in South Korea continues to decline, even though most of the national budget has been spent on measures to address this and many studies have been conducted on the increase in the fertility rates. In this regard, this study aims to verify the effectiveness of the detailed factors affecting the fertility rate that have been discussed in the previous studies on fertility rates, and to investigate the overall trend toward enhancing the quality of life and increasing the fertility rate through macroscopic and structural studies under the recognition of problems related to the policy approaches through the case studies of the European countries. Toward this end, this study investigated if a high quality of life in advanced countries contributes to the increase in the fertility rate, which country serves as a state model that has a high quality of life and a high fertility rate, and what kind of social and policy environment does the country have with regard to childbirth. The analysis of the OECD Better Life Index (BLI) and CIA fertility rate data showed that the countries whose people enjoy a high quality of life do not necessarily have high fertility rates. In addition, under the recognition that a country with a high quality of life and a high birth rate serves as a state model that South Korea should aim for, the social characteristics of Iceland, Ireland, and New Zealand, which turned out to have both a high quality of life and a high fertility rate, were compared with those of Germany, which showed a high quality of life but a low fertility rate. According to the comparison results, the three countries that were mentioned showed higher awareness of gender equality; therefore, the gender wage gap was small. It was also confirmed that the governments of these countries support various policies that promote both parents sharing the care of their children. In Germany, on the other hand, the gender wage gap was large and the fertility rate was low. In a related move, however, the German government has made active efforts to a paradigm shift toward gender equality. The fertility rate increases when the synergy lies in the relationship between parents and children; therefore, awareness about gender equality should be firmly established both at home and in the labor market. For this reason, the government is required to provide support for the childbirth and rearing environment through appropriate family policies, and exert greater efforts to enhance the effectiveness of the relevant systems rather than simply promoting a system construction. Furthermore, it is necessary to help people in making their own childbearing decisions during the process of creating a better society by changing the national goal from 'raising the fertility rate' to 'creating a healthy society made of happy families'

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.190-217
• /
• 2012

This research has studied the building awareness of Nu-Jeong that a view of nature and aesthetic consciousness to unite the nature are inherent by considering Nu-Jeong of scholars who left fame and wealth behind and retired to hermitage in the backwoods in the 16~18 Century. This is to clarify correlation with leaving nature as it is, namely, an ideal state that scholars at the time would enjoy, through landscape awareness accepted into Nu-Jeong literature. In addition, this research has tracked the ideologic flow that acts on space formation by clarifying Korean unique meanings inherent to Nu-Jeong's cultural landscape. As a suggestion for this, the interpretation through 'Pungsu location Nu-Jeong name's analysis Nu-Jeong literature analysis', etc. was tried, so its integrated conclusion is as follows. It is not a chance that scholars of Joseon have left numerous literature works singing the nature. They already had huge interest and knowledge on the nature, and achieved active poetic exchange by sublimating the praise of nature as literature. Nu-Jeong, which was a place of exchange like this, had cleanliness of the nature and ideological purity as an oppositional space on turbid political realities. The Nu-Jeong literature drew the nature into a literature space as it is, without doing abstraction or ideation on the nature. The owner of Nu-Jeong exclusively possessed such natural landscape in grim and independent postures, so it provided a clue of Nu-Jeong cultural landscape that this research aimed to discuss. Scholars who aimed to raise wide and large vigor filled in between the sky and earth got to convince that people are born from the nature, grow in the nature and finally return to the nature. What people are born from the nature and finally return to the nature is just consistent with Taoistic and Zhua-ngzi thoughts denying human work, and leaving nature as it is or nature itself remained intact which is an ideal state. The construction at the time is a vessel containing the spirit of the times of the era. This thesis has proved that the Nu-Jeong culture of scholars located on the central line of Korean landscape was the flower of Joseon's scholar culture by interpreting it semantically.