• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7A
• /
• pp.669-677
• /
• 2011

Superframe in IEEE 802.15.4 Standard is subdivided into an active period and an inactive period to reduce energy consumption. But communication nodes use same data transmission range in an active period, thus communication nodes spend a lot of energy to send data another nodes. In this paper, we proposed reduce energy consumption algorithm that nodes use different transmission power. Cordinator split transmission area into four group and transmit becon message to nodes. Nodes adjust transmission power according to becon message and wates lowe energy than normal nodes. We proposed energy-efficient cross layer protocol that have different PAN (Personal Area Network) by four range group.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.150-155
• /
• 2006

Falling liquid plays a role in a wide variety of naturally occurring phenomena as well as in the operation of industrial process equipment where heat and mass transfer take place. In such cases, it is required that the falling film should spread widely on the surface forming thin liquid film to enlarge contact surface. An addition of surface active agent to a falling liquid film affects the flow characteristics of the falling film. In this study the heat transfer characteristics for a falling liquid film has been investigated by an addition of the surface active agents. The falling liquid film was formed on a vertical flat plate. As the mass flow rate of liquid falling film is increased, the wetted area is a little increased while the heat transfer rate as well as heat transfer coefficient is significantly increased. It is also found that both wetted area and heat transfer rate is substantially increased while heat transfer coefficient is a little increased with an increase in the surfactant concentration at a given mass flow rate.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.216-223
• /
• 2008

Purpose: This study was performed to evaluate the worker's job stress status in the workplace of a local area. Method: Data were collected from October to December, 2007. The subjects were 208 workers at 2 work sites in Busan Metropolitan area, who were examined using Job-Strain-Model Questionnaire. Data were analyzed by SPSS 12.0 Win Program to get the percentage, mean, standard deviation, t-test, ${\chi}^2$-test, ANOVA. Results: The results of this study were as follows: In the mean sub-factors job stress level, the mean of job demand was $28.7{\pm}4.4$(median 29.0), the mean of job discretion was $54.7{\pm}8.2$(median 54.0), the mean of social support was $21.8{\pm}2.9$(range:8-32). This study's subjects were appeared as active group with relatively higher score of job demand and job discretion than the average value of those. There was no statistically significant difference of general characteristics among the different job strain groups. There was statistically significant difference with of social supports among the different job strain groups. Conclusion: In conclusion, the subjects of this study's were active group. Thus, it is suggested that it is be necessary to repeated the education of the job task work for active group with high score of job demand and job discretion.

• Carbon letters
• /
• v.8 no.4
• /
• pp.274-279
• /
• 2007

In order to understand the breakthrough behaviour of iodine vapours on impregnated carbon systems, an active carbon, 80 CTC grade, $12{\times}30$ BSS particle size and $1104\;m^2/g$ surface area, was impregnated with metal salts such Cu, Cr, Ag, Mo and Zn, and an organic compound Triethylene diamine (TEDA) to prepare different carbon systems such as whetlerite, whetlerite/TEDA, whetlerite/KI/KOH and ASZMT. The prepared adsorbents along with active carbon were characterized for surface area and pore volume by $N_2$ adsorption at liquid nitrogen temperature. These carbon systems were compared for their CT (concentration X time) values at 12.73 to 53.05 cm/sec space velocities and 2 to 5 cm carbon column bed heights. The carbon column of 5.0 cm bed height and 1.0 cm diameter was found to be providing protection against iodine vapours up to 5.5 h at 3.712 mg/L iodine vapour concentration and 12.73 cm/sec space velocity. The study clearly indicated the adsorption capacities of carbon systems to be directly proportional to their surface area values. Dead layer with all the prepared carbon systems was found to be less than 2.0 cm indicating it to be minimum bed height to have protection against $I_2$ vapours. Effect of carbon bed height and flow rate was also studied. The active carbon showed maximum protection at all bed heights and flow rates in comparison to all other impregnated carbon systems, showing that only physical adsorption is responsible for the removal of iodine vapours.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.10-14
• /
• 2011

The electrode material performances of electric double layer capacitor(EDLC) were investigated using mesopous active carbon fiber(ACF), which was prepared by the iron exchange method. The mesoporous ACF had pore characteristics of specific surface area around 1249, 664 $m^2$/g, mesoporous fraction around 70.6-81.3% and meanpore size around 2.78-4.14 nm. The results showed that as HNO3 treatment time decreased, the specific surface area increased and mesoporous fraction decreased. To investigate electrochemical performance of EDLC, unit cell was manufactured using mesoporus ACF, conducting material and binder; organic elctrolyte was used on this experiment. The specific capacitance of ACF treated with HNO3 for 2 hours turned out to be 0.47 $F/cm^2$and the results of the cyclic charge-discharge tests were stable. Thus, the electrochemical performance of EDLC was mainly dependent on specific surface area of ACF electrode and the diffusion resistance of charge decreased as the mesopore increased.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.122-128
• /
• 2013

This paper presents a detection algorithm that accurately finds the active area of a video player on monitors or smart TVs. Unlike the previous approaches, temporal difference-based detection algorithms or hooking programs, the proposed detection algorithm can locate the active video player by using the spatial and temporal correlation and a corner detection filter. First, an initial location of the video player is found using conventional temporal difference-based detection. Then, starting from the initial location, the four corners of the active video player are detected by the spatial edge information and the corner detection filter. The experimental results show that proposed algorithm provides fast detection speed and high accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1053-1060
• /
• 2016

This paper proposes an adaptive equalizer with the digitally controlled active variable capacitor. An equalizing amplifier consists of a main amplifier and a source degeneration RC filter which is implemented using the digitally controlled active variable capacitor for area efficiency and linear loss compensation. The active capacitor changes its capacitance by the amplifier gain control, which is based on miller effect. In the simulated results, the proposed equalizer compensates the high frequency loss and extends the data eye width from 0.31 UI to 0.64 UI.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1027-1028
• /
• 2008

Most of the urban transit operation company in Korea have a passive surveillance system to monitor the status of the passengers and facilities in the urban transit service area. The surveillance system is based on CCTV, closed circuit television, and several sensors, such as a fire sensor. However, this system has some limitations to prevent and cope with the emergency quickly. So the urban transit operation companies have plans to be change their surveillance system to be active. The active surveillance system has an intelligent function to detect the event predefined by managers automatically. To construct the active surveillance system, there are a standard concept design and a function analysis. In this paper, we propose the classification of the functions of the active surveillance system for urban transit. We divide the functions into five parts, ordinary monitoring, safety monitoring, environment monitoring, administration support, and record management. And we describe the systems related to the every functions to clarify the classified functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1296-1303
• /
• 1994

In this paper, a design of active inductors and their application in a frequency converter are proposed. In MMIC design, passive spiral inductor takes larger area than any other passive and active elements. A conventional spiral inductor generates undesired crosstalk, and its performance cannot have certainty and reproducibility. Meanwhile the active inductor eliminates these drawbacks, and operates for much wider bandwidth. Furthermore, its size is smaller and nearly independent of inductance. the performance of MMIC frequency converter with active inductors is directly compared with that of the frequency converters with spiral inductors. The size is 28.6% smaller with better performance in MMIC frequency converter.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.2
• /
• pp.90-98
• /
• 2003

Recently, the increasing application of electronic equipments and information devices has heightened the interest in power qualify. The term power quality is applied to a wide range of electromagnetic phenomena on the power system and is also concentrated by all areas such as utilities, their customers and suppliers of load equipments. In engineering terms, power Qualify is expressed by voltage qualify because the power supply system can only control the quality of the voltage. Therefore, the standards in power quality area are devoted to keep the supply voltage within allowable limits. This paper deals with single-phase unified power quality conditioner (UPQC), which ai s at the integration of series-active and shunt-active filter. The series filter il used to compensate for the voltage distortions and the shunt filter is used to provide reactive power and counteract the harmonic current injected by the load. Also, the voltage of the DC link capacitor is controlled to a desired value by the shunt active filter. The validity of the proposed UPQC is demonstrated using both the MATLAB/SIMULINK simulation and the experimental device with DSP (TMS320C32).