• The Journal of Internal Korean Medicine
• /
• v.41 no.4
• /
• pp.553-562
• /
• 2020

Objective: To investigate the vasodilatory effect of Sipjeondaebo-tang by inhibiting RhoA activity in vascular cells during cold exposure. Methods: Human vascular endothelial cells and pericytes were pretreated with Sipjeondaebo-tang for 30 min, followed by incubation at 37 ℃ (control) or 25 ℃ (cold exposure) for 30 min. Activation of endothelin-1-mediated RhoA in pericytes was assessed by pretreating the cells with Sipjeondaebo-tang for 30 min, followed by incubation with endothelin-1 at 37 ℃ for 30 min. Western blotting was performed to measure the expression of active RhoA. Endothelin-1 and nitric oxide release from endothelial cells was examined with enzyme-linked immunosorbent assay kits. The formation of stress fibers and focal adhesion complexes was analyzed by immunocytochemistry. Results: Cold treatment activated RhoA in both pericytes and vascular endothelial cells, whereas Sipjeondaebo-tang treatment inhibited this activation. Sipjeondaebo-tang treatment also reversed the cold-mediated production of endothelin-1 and nitric oxide. Cold exposure promoted the formation of stress fibers and focal adhesion complexes by increasing the expression of phospho-focal adhesion complex kinase, whereas Sipjeondaebo-tang treatment suppressed this response. Conclusions: These findings suggested that Sipjeondaebo-tang inhibits cold-induced RhoA activation and its related pathway components, including endothelin-1 and nitric oxide, in vascular cells. Therefore, Sipjeondaebo-tang could be beneficial for the treatment of Raynaud's phenomenon.

• KSBB Journal
• /
• v.24 no.6
• /
• pp.549-555
• /
• 2009

4 kinds of Regional Special Natural Products (RSNPs), such as Anthrisci radix, Psoraleae semen, Siegesbeckiae herba and Corni fructus were examined to verify for anti-obesity effect. $PPAR\gamma$ (peroxisome proliferator-activated receptor $\gamma$) from 3T3-L1 cell concerning adipocyte differentiation was suppressed by different concentraton of 4 RSNPs with western blot, when treated RSNPs' extract and MDI (IBMX, Dexamethasone, Insulin) at the same time. Also, SREBP-1 (Sterol regulatory element binding protein) controlling lipogenesis and $PPAR\gamma$ expression levels were reduced by these 4 RSNPs' extract, when these chemicals after differentiation of 3T3-L1 cell. And lipid droplets were reduced by 7.5%, 14.4%, 18.3% and 30% at different concentration of Anthrisci radix from Oil Red O staining. Also, it was reduced by 2%, 4.9%, 9.3% and 38% at different concentration of Psoraleae semen. For Siegesbeckiae herba, it was inhibited by 1.4%, 6.4%, 16.4% and 30.1%, respectively. And Corni fructus was also showed by 0.9%, 6.3%, 13.7% and 33% at same concentration of Siegesbeckiae herba. These 4 kinds of RSNPs were expected for a useful material for anti-obesity materials.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.8
• /
• pp.1008-1018
• /
• 2000

Objective : Glutamate induced excitotoxicity is one of the leading causes of cell death under pathologic condition. However, there is controversy whether excitotoxicity may also participate in the neuronal death under low intensity insult such as simple hypoxia or hypoglycemia. To investigate the role of NMDA receptor in low intensity insult, we chose anoxia as the method of injury and used organotypically cultured hippocampal slice as the material of experiment. Materials & Methods : The hippocampal slices cultured for 2-3 weeks were exposed to 60 minutes of complete oxygen deprivation(anoxia). Neuronal death was assessed with Sytox stain. Corrected optical density of fluorescence in gray scale, used as cellular death indicator, was obtained from pictures taken at 24 and 48 hours following the insult. The well-known in vivo phenomenon of regional difference in susceptibility of hippocampal sub-fields to ischemic insult was reproduced in HOSC(hippocampal organotypic slice culture) by complete oxygen deprivation injury. Results : $CA_1$ was the most vulnerable to complete oxygen deprivation in hippocampus while $CA_3$ was resistant. Oxygen deprivation for 10 and 20 minutes with glucose(6.5g/l) present was insufficient to induce neuronal death in the cultured hippocampal slice. However, after 30 minutes exposure under anoxic condition, neuronal death was able to be detected in the center of $CA_1$ area. The intensity and area of fluorescence indicating cell death correlated with the duration of oxygen deprivation. NMDA receptor and non-NMDA receptor blocking with MK-801(30 & $60{\mu}M$) and CNQX($100{\mu}M$) did not provide cellular protection to HOSC against damage induced by oxygen deprivation, but increased intracellular calcium buffering capacity with BAPTA-AM($10{\mu}M$) was effective in preventing neuronal death (p=0.01, Student's t-test). Cycloheximide($1{\mu}g/ml$, $10{\mu}g/ml$) provided no protection to HOSC against insult of complete oxygen deprivation for 60 minutes and combined therapy of MK-801(30 & $60{\mu}M$) and cycloheximide(1 & $10{\mu}g/ml$) was also ineffective in preventing neuronal death. Conclusion : The results of this study show that the another mechanism not associated with glutamate receptor(NMDA & non NMDA) may play major role in cell death mechanisms induced by complete oxygen deprivation and increased intracellular calcium during anoxia may participate in the neuronal death mechanism of oxygen deprivation. Further investigation of the calcium entry channel activated during oxygen deprivation is necessary to understand the neuronal death of anoxia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.611-621
• /
• 2016

This study examined the effects of collagen peptide intake extracted from the tilapia fish (TFCP) on UVB-induced skin in hairless mice. To cause photoaging, the hairless mice were exposed to UVB irradiation three times a week and TFCP was administered with 545 and 1090 mg/kg once a day for 12 weeks. The level of wrinkle formation, thickness of the skin, acute erythema, skin hydration, amount of hydroxyproline, expression of MMPs and filaggrin were measured. Wrinkle formation, thickness of the skin, and acute erythema were significantly lower and skin hydration was higher in the TFCP intake group compared to the UVB-control mice group. In addition, the amount of the collagen and hydroxyproline of the collagen peptide intake group were much higher than the UVB-control group. Oral administration of TFCP inhibited the expression of the MMP-3 and MMP-13 mRNA level as well as activated MMP-2 and MMP-9 induced by UV irradiation, and increased the protein expression of filaggrin in hairless mice skin. In summary, the oral administration of TFCP can inhibit wrinkle formation and protect the skin from UV-damage. Therefore, this study suggests that TFCP is a potential candidate material for skin functional foods.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.49-58
• /
• 2014

PURPOSES : In areas of high traffic volume, such as expressway across large cities, the amount of nitrogen oxides (NOx) emitted into the atmosphere as air pollution can be significant since NOx gases are the major cause of smog and acid rain. Recently, the importance of NOx removal has arisen in the world. Titanium dioxide ($TiO_2$), that is one of photocatalytic reaction material, is very efficient for removing NOx. The NOx removing mechanism of $TiO_2$ is the reaction of solar photocatalysis. Therefore, $TiO_2$ in road structure concrete need to be contacted with ultraviolet rays (UV) to be activated. In general, $TiO_2$ concretes are produced by replacement of $TiO_2$ as a part of concrete binder. However, considerable portion of $TiO_2$ in concrete cannot contact with the pollutant in the air and UV. Therefore, $TiO_2$ penetration method using the surface penetration agents is attempted as an alternative in order to locate $TiO_2$ to the surface of concrete structure. METHODS : This study aimed to evaluate the NOx removal efficiency of photocatalytic concrete due to various $TiO_2$ application method such as mix with $TiO_2$, surface spray($TiO_2$ penetration method) on hardened concrete and fresh concrete using surface penetration agents. The NOx removal efficiency of $TiO_2$ concrete was confirmed by NOx Analyzing System based on the specification of ISO 22197-1. RESULTS : The NOx removal efficiency of mix with $TiO_2$ increased from 11 to 25% with increasing of replacement ratio from 3 to 7%. In case of surface spray on hardened concrete, the NOx removal efficiency was about 50% due to application amount of $TiO_2$ with surface penetration agents as 300, 500 and 700g/m2. The NOx removal efficiency of surface spray on fresh concrete due to all experimental conditions, on the other hand, which was very low within 10%. CONCLUSIONS : It was known that the $TiO_2$ penetration method as surface spray on hardened concrete was a good alternative in order to remove the NOx gases for concrete road structures.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.51-60
• /
• 1995

Lithium Fluoride (LiF; TLD-100) crystal chips are normally used as thermolu minescence dosimeters (abbreviated as NC-100) for estimating the absorbed dose to the skin of a patient or in a solid water phantom undergoing radiotherapy with megavoltage photon (6 and 15MV) beams. In general, investigation has revealed a reduction in the sensitivity of NC-100 chips after many runs through heating cycles. A TLD-100 chip laminated with gold plate (140${\mu}{\textrm}{m}$) on the upper surface layer of its face toward the photon beam (abbreviated as GC-100) has properties different from that of a NC-100 chip activated by incident photons and contaminant electrons with various lower energies coming from the gantry head and air. Activation of the valence band electrons of GC-100 chips by incident photons, positrons and electrons-which come from the gold plate by mainly pair production process and partly from Compton scattering-results in more enhanced signal intensity, higher response per monitor unit, as well as a good linearity with monitor units and independence of dose rate. Since the electron beams (6 and 15 MeV) do not have the probability of pair production process with gold plate, there is only a small difference (about a 3.3％ increase for 15 MeV) in the signal gaps in the TL readout for electron beams between GC- and NC-100 chips. The 3.3％ increase is entirely due to the buildup caused by the 140 m gold plate. The sensitivity of GC-100 chips is much more susceptible to high energy photon beams than electron one because of pair production. The interaction of high energy photon with a material of high atomic number, such as the good plate in this case, results in a considerably significant probability of pair production. The gold plate on the NC-100 chips acts as not only an intensifier of their signals but also acts as a filter of contaminant electrons in therapeutic high energy X-ray beams.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.110-115
• /
• 2012

$Epimedium$ $koreanum$ Nakai is a wild medicinal plant commonly consumed in South Korea due to its beneficial health effects. In this study, the antimutagenic and immunological activities of $E.$ $koreanum$ Nakai extracts were investigated for their use in food. In the immunomodulating activity, the effects of $E.$ $koreanum$ Nakai on the B cell (Rhamos) and T cell (Molt-4) were investigated. The results showed that the growth and viability of the B and T cells were increased and activated more in the ethylacetate (1.35 and 1.48 times) and water fraction (1.30 and 1.40 times), respectively. In the Ames test, none of the fractions produced a mutagenic effect on $Salmonella$. $typhimurium$ TA98 and TA 100. The ethylacetate fraction showed a strong antimutagenic effect (98%) on and a high butanol fraction (84%) of B(${\alpha}$)P in $S.$ $typhimurium$ TA98 and TA100, respectively. In 4-nitroquinoline-1-oxide (4NQO), all the solvent fractions showed an over 70% antimutagenic effect, except for the chloroform extract. Especially, ethylacetate and butanol showed strong inhibition of the mutagenic effects (80 and 90%) on 4NQO in $S.$ $typhimurium$ TA98 and TA100, respectively. These results provide preliminary data for the development of $E.$ $koreanum$ Nakai as an edible food material.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.306-312
• /
• 2010

Purpose: The purpose of this experiment was to evaluate the clinical effect of cultured autoglogous osteoblasts as a way to treat the defect of mandible in rabbits. Materials and Methods: Twelve rabbits were used to determine the rate of osteogenesis. The osteoblasts were obtained from the iliac crest of rabbits using aspiration. They were then cultured in Dulbecco's Modified Eagles's Medium (DMEM) with beta-glycerophosophatate, L-ascorbicacid, and dexamethasone to proliferate and differentiate osteoprogenitor cells. The expression of osteogenic markers were detected by reverse transcription-polymerase chain reaction (RT-PCR) and silver nitrate staining techniques. Five, 10-mm holes were placed in each rabbit mandible to simulate defective regions with the use of a low speed trephine bur. In the experimental group, the previously cited defects were grafted with both activated osteoblastic and autogenous bone. The control group, however, was only grafted with autogenous bone. Both groups were then analyzed at 2, 4, and 8-week intervals using bone histomorphometric analysis. Results: According to histomorphologic analysis, the rates of new bone formation at the 2, 4, and 8-week intervals were 36%, 51%, and 23% for the control group, respectively; 52%, 39%, and 28%, for the experimental group, respectively. The experimental group showed higher rates of new bone formation compared to the control group at both the 2-week and 8-week interval. Conclusion: Bone marrow-derived osteoblasts seems to be a promising bone graft material.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.1
• /
• pp.26-31
• /
• 2000

The ~1540 nm $^4$ $I_{13}$ 2/ longrightarro $w^4$ $I_{15}$ 2/ emissions of E $r^{3+}$ in Er-implanted GaN annealed at temperatures in the 400 to 100$0^{\circ}C$ range were investigated to gain a better understanding of the formation and dissociation processes of the various E $r^{3+}$ sites and the recovery of damage caused by the implantation with increasing annealing temperature ( $T_{A}$).The monotonic increase in the intensity of the broad defect photoluminescence(PL) bands with incresing $T_{A}$ proves that these are stable radiative recombination centers introduced by the implantation and annealing process. Theser centers cannot be attributed to implantation-induced damage that is removed by post-implantation annealing. Selective wavelength pumpling of PL spectra at 6K reveals the existence of at least nine different E $r^{3+}$ sites in this Er-implanted semiconductor. Most pf these E $r^{3+}$ PL centers are attributed to complexed of Er atoms with defects and impurities which are thermally activated at different $T_{A}$. Only one of the nine observed E $r^{3+}$ PL centers can be pumped by direct 4f absorption and this indicates that it is highest concentration E $r^{3+}$ center and it represents most of the optically active E $r^{3+}$ in the implanted sample. The fact that this E $r^{3+}$ center cannot be strongly pumped by above-gap light or broad band below-gap absorption indicates that it is an isolated center, i.e not complexed with defects or impurities, The 4f-pumped P: spectrum appears at annealing temperatures as low as 40$0^{\circ}C$, and although its intensity increase monotonically with increasing $T_{A}$ the wavelengths and linewidths of its characteristic peaks asre unaltered. The observation of this high quality E $r_{3+}$PL spectrum at low annealing temperatures illustrates that the crystalline structure of GaN is not rendered amorphous by the ion implantation. The increase of the PL intensities of the various E $R_{3+}$sites with increasing $T_{A}$is due to the removal of competing nonradiative channels with annealing. with annealing.annealing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.351-365
• /
• 2001

For accurate impression taking, accurate impression material, solid individual tray, and bond strength between impression materials and resin tray are important factors. The purpose of this study was to evaluate tensile bond strength of rubber impression materials to various tray resin materials. This study tested the time dependent tensile bond strength between commercial brands or poly ether, polysulfide, additional silicone impression materials and commercial brands of self curing tray resin. light activited tray resin when applying adhesive Resin specimens were made with 20mm in diameter, 2mm in thickness. 1 made total 360 specimens, 10 per each group and the tensile bond strength was measured by using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The results were as follows ; Comparisons of various impression materials. 1. In case of Impregum $F^{(R)}$, the bond strength of tray resin was decreased in order of SR $Ivolen^{(R)}$, Ostron $100^{(R)}$ Instant tray $mix^{(R)}$, $Lightplast^{(R)}$. All groups excluding Ostron $100^{(R)}$, Instant tray $mix^{(R)}$ are significant difference (p<0.05). Drying time after applying adhesive, the tensile bond strength of tray resin was insignificantly decreased in order of 10 min drying time group. 1 min drying time group. 5 min drying time group. 2. In case of Permlastic $regular^{(R)}$ the bond strength of tray resin was insignificantly decreased in order of Ostron $100^{(R)}$. SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$ $Lightplast^{(R)}$. About drying time after applying adhesive, the tensile bond strength of tray resin was significantly decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). 3. In case of Exaflex $regular^{(R)}$. the bond strength of tray resin was decreased in order of $Lightplast^{(R)}$, SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$, Ostron $100^{(R)}$. $Lightplast^{(R)}$ was significant difference(p<0.05). About drying time after applying adhesive, the tensile bond strength of tray resin was decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). Especially 5 min ding time group was significant difference(p<0.05). According to the results of this study, we can see the greatest tensile bond strength when using Impregrm $F^{(R)}$ and Permlastic $regular^{(R)}$ with self curing tray resin, when using Exaflex $regular^{(R)}$ with light activated tray resin In my opinion, adhesive should be dried more than 5 min before impression taking to achieve the greatest tensile bond strength.