• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.581-584
• /
• 2001

For the first time, a totally solid state electric double layer capacitor has been fabricated using an alkaline polymer electrolyte and an activated carbon powder as electrode material. The polymer electrolyte serves both as separator as well as electrode binder. The capacitor has a three-layer structure; electrode-electrolyte-electrode. A cyclic voltammetry and constant current discharge have been used for the determination of the electro chemical performance of capacitors.

• 한국축산시설환경학회지
• /
• 제13권3호
• /
• pp.211-218
• /
• 2007

본 시험은 축분을 이용한 활성탄소를 제조하는 기술을 개발하고 이의 활용방안을 연구하여 축분의 처리방법을 다변화하고 제조된 활성탄소의 토양개량재, 악취흡착재 등 농업적 이용을 모색하기 위하여 악취제거시험 등을 수행하였으며 그 결과는 다음과 같다. 1. 가축분을 건조, 펠렛화 과정을 거친 후 $400^{\circ}C$에서 1시간 탄화처리하고 $750^{\circ}C$에서 1시간 활성화처리시 활성탄소가 제조되었다. 2. 축분의 회분 함량은 돈분퇴비가 11.9%로 낮았으나 계분퇴비 29.8%, 젖소깔짚 40.7%로 높았다. 휘발성물질은 젖소깔짚 11.6%, 계분퇴비 18.8%, 계분 31.0%, 돈분퇴비 22.3% 이었으나 육계깔짚은 49.8%로 높았다. 3. 축분활성탄소의 비표면적은 계분퇴비 259.8, 계분 209.8, 돈분퇴비 442.3, 젖소깔짚 $812.9\;m^2/g$으로 야자각 활성탄소 $1,040\;m^2/g$ 보다 낮았으며 미세기공의 크기는 육계깔짚 $5.02\;{\AA}$으로서 큰 반면 젖소깔짚은 $0.39\;{\AA}$으로 야자각 활성탄소와 비슷하였다. 4. 축분활성탄소의 요오드 흡착능력은 $530{\sim}580mg/g$으로 야자각 활성탄소의 1,000 mg/g 보다 낮았다. 5. 암모니아가스의 흡착율은 계분이나 계분퇴비로 만든 활성탄소가 가장 낮았으며 젖소깔짚 활성탄소가 가장 높았으며 계분퇴비 활성탄소는 20분 경에 흡착 포화에 도달하는 반면 젖소깔짚 활성탄소는 40분이 되어서 흡착 포화에 도달하였다. 6. 황화수소의 경우 휘발성물질이 비교적 많은 육계깔짚, 계분퇴비, 산란계분 등으로 만든 활성탄소에서 흡착율이 낮았으며 젖소깔짚 활성탄소에서 높았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.89-94
• /
• 2011

In this research, among thermoplasticity plastic raw material that recycling is possible polyolefine(TPO) and polyvinyl chloride(PVC) as target recycling plan examine wish to. It is polyolefine(TPO) and polyvinyl chloride(PVC)) is mediocrity material that there are a lot of amount useds among plastic material and it is material that recycling is also activated most. Long term made first new regulation raw material, by-product raw material happened at process of production at second factory and third time to examine recycling plan of this material divides this as raw material that pass through process separation and pelet Tuesday and analyzed each special quality removing each removed waste after is used. Measure tension strength and ext. heightening gradually mixing proportion of refreshing resources on standard Sample manufactured as new raw material and application examined possibility availability to single fly system.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.303-315
• /
• 1995

An adequate and homogeneous cure of light-activated restroative material is very important for improvement of marginal adaptation and prevention of marginal leakage, secondary caries and pulpal irritation as well as expressing natural physical property of that material. The purpose of this study was to evaluate the change of surface hardness and cure uniformity of light-activated glass ionomer cements. Restorative(Fuji II LC, Vitremer) and lining(Baseline VLC, Vitrebond) light-activated glass ionomer cements were investigated for this study. The surface hardness of the top and bottom surfaces and cure uniformity of each 1mm, 1.5mm, 2mm, 2.5mm & 3mm in the thickness of specimen were measured immediately, at 1 hour, 24 hours and 1 week after light activation. The surface hardness change and cure uniformity of all the specimens were measured by Knoop hardness tester. The results were as follows. 1. The surface hardness of top and bottom surfaces in all groups increased with time(p<0.01). 2. Both top and bottom surfaces hardness of Vitrebond group measured immediately after light-activation were significantly lower than those of the other groups(p<0.01). 3. The surface hardness of top and bottom surfaces of restorative light -activated glass ionomer cements was higher than those of lining materials at 1 week(p<0.10). 4. Surface hardness of Vitremer group decreased as the specimen thickness increased, except top and bottom surfaces hardness of the specimen at 1 week(p<0.01). There was no significant difference in the surface hardness of Fuji II LC with changes in the thickness except bottom surface hardness of specimen at 24 hours and 1 week (p>0.05). 5. Surface hardness of Vitrebond group significantly decreased as the specimen thickness increased(p<0.01). There was no significant difference in the surface hardness of Baseline VLC group with changes in the thickness except bottom surface hardness of specimen measured immediately after light -activation(p>0.05). 6. The hardness ratio of top against bottom surface in all groups decreased with time(p<0.05). 7. There was no significant difference in the hardness ratio of top against bottom surface with changes of the thickness except Vitrebond group, 24 hours and 1 week of Vitremer group and 1 week of Baseline VLC group (p>0.05). These results suggest that surface hardness of restorative ligh-activated glass ionomer cements were highter than those of lining light-activated materials. In all groups, the surface hardness and cure uniformity continuously increased with time.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.1-8
• /
• 2013

PURPOSES : This study is to evaluate the feasibility of using the alkali activated cement concrete for application of partial-depth repair in pavement. METHODS : This study analyzes the compressive strength of alkali activated cement mortar based on the changes in the amount/type/composition of binder(portland cement, fly ash, slag) and activator(NaOH, $Na_2SiO_3$, $Na_2CO_3$, $Na_2SO_4$). The mixture design is divided in case I of adding one kind-activator and case II of adding two kind-activators. RESULTS : The results of case I show that $Na_2SO_4$ based mixture has superior the long-term strength when compared to other mixtures, and that $Na_2CO_3$ based mixture has superior the early strength when compared to other mixtures. But the mixtures of case I is difficult to apply in the material for early-opening-to-traffic, because the strength of all mixtures isn't meet the criterion of traffic-opening. The results of case II show that NaOH-$Na_2SiO_3$ based mixtures has superior the early/long-term strength when compared to NaOH-$Na_2SiO_3$ based mixtures. In particular, the NaOH-$Na_2SiO_3$ based some mixtures turned out to pass the reference strength(1-day) of 21MPa as required for traffic-opening. CONCLUSIONS : With these results, it could be concluded that NaOH-$Na_2SiO_3$ based mixtures can be used as the material of pavement repair.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.192-198
• /
• 2017

Carbon nanofiber (CNF) is used as an electrode material for electrical double layer capacitors (EDLCs), and is being consistently researched to improve its electrochemical performance. However, CNF still faces important challenges due to the low mesopore volume, leading to a poor high-rate performance. In the present study, we prepared the unique architecture of the activated mesoporous CNF with a high specific surface area and high mesopore volume, which were successfully synthesized using PMMA as a pore-forming agent and the KOH activation. The activated mesoporous CNF was found to exhibit the high specific surface area of $703m^2g^{-1}$, total pore volume of $0.51cm^3g^{-1}$, average pore diameter of 2.9 nm, and high mesopore volume of 35.2 %. The activated mesoporous CNF also indicated the high specific capacitance of $143F\;g^{-1}$, high-rate performance, high energy density of $17.9-13.0W\;h\;kg^{-1}$, and excellent cycling stability. Therefore, this unique architecture with a high specific surface area and high mesopore volume provides profitable synergistic effects in terms of the increased electrical double-layer area and favorable ion diffusion at a high current density. Consequently, the activated mesoporous CNF is a promising candidate as an electrode material for high-performance EDLCs.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.289-292
• /
• 2014

The effect of carbon dioxide ($CO_2$) on global warming is serious problem. The adsorption with solid sorbents is one of the most appropriate options. In this study, the most interesting adsorbent is granular activated carbon (GAC). It is suitable material for $CO_2$ adsorption because of its simple availability, many specific surface area, and low-cost material. Afterwards, GAC was impregnated with chitosan solution as impregnated granular activated carbon (CGAC) in order to improve the adsorption capacity of GAC. This research aims to compare the physical and chemical characteristics of GAC and CGAC. The experiment was carried out to evaluate the efficiency of $CO_2$ adsorption between GAC and CGAC. The results indicated that the iodine number of GAC and CGAC was 137.17 and 120.30 mg/g, respectively. The Brunauer-Emmett-Teller results (BET) of both GAC and CGAC show that specific surface area was 301.9 and $531.3m^2/g$, respectively; total pore volume was 0.16 and $0.29cm^3/g$, respectively; and mean diameter of pore was 2.18 and 2.15 nm, respectively. Finally, the $CO_2$ adsorption results of both GAC and CGAC in single column how the maximum adsorption capacity was 0.17 and 0.25 mol/kg, respectively; how degeneration time was 49.6 and 80.0 min, respectively; and how the highest efficiency of $CO_2$ adsorption was 91.92% and 91.19%, respectively.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.523-529
• /
• 2023

Cemented uranium tailings backfill created from alkali-activated slag (CUTB) is an effective method of disposing of uranium tailings. Using some environmental functional minerals with ion exchange, adsorption, and solidification abilities as backfill modified materials may improve the leaching resistance of the CUTB. Natural zeolite, which has good ion exchange and adsorption characteristics, is selected as the backfill modified material, and it is added to the backfill materials with cementitious material proportions of 4%, 8%, 12%, and 16% to prepare CUTB mixtures with environmental functional minerals. After the addition of natural zeolite, the uniaxial compressive strength (UCS) of the CUTB decreases, but the leaching resistance of the CUTB increases. When the natural zeolite content is 12%, the UCS reaches the minimum value of 8.95 MPa, and the concentration of uranium in the leaching solution is 0.28-8.07 mg/L, the leaching rate R₄₂ is 9.61×10^-7 cm/d, and cumulative leaching fraction P₄₂ is 8.53×10^-4 cm, which shows that the alkali-activated slag cementitious material has a good curing effect on the CUTB, and the addition of environmental functional minerals helps to further improve the leaching resistance of the CUTB, but it reduces the UCS to an extent.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.557-563
• /
• 2003

SiC has been an useful material for the high voltage, high temperature, and high frequency devices, however, the required high process temperature to activate the implanted p-type dopants has hindered further developments. In this study, we report, for the first time, on the laser activation of implanted Al and non-alloyed Mo ohmic contacts and its application to MOSFET fabrication. The contact and sheet resistance measured from CTLM patterns have decreased by increasing laser power, and the lowest values are 3.9 $K\Omega$/$\square$ and 1.3 $\times$ 10$^{-3}$ $\Omega$-cm$^2$, respectively, at the power density of 1.45 J/cm$^2$ The n-MOSFETs fabricated on laser activated p-well exhibit well-behaved I-V characteristics and threshold voltage reduction by reverse body voltage. These results prove that the laser process for implant activation is an alternative low temperature technology applicable to SiC devices.