• 대한화학회지
• /
• 제65권2호
• /
• pp.88-92
• /
• 2021

In art painting creation, painting material is an important carrier. Acrylic as a young material has very wide applications in modern art. This study mainly analyzed the properties of acrylic material. Firstly, the emergence and development of acrylic were introduced, and then its material characteristics were analyzed. Finally, the performance embodiment of acrylic paintings was compared with oil paintings and watercolor paintings. It was found that acrylic paintings not only had some advantages of oil and watercolor paintings but also had own style characteristics; acrylic paintings also have advantages in durability and flexibility; acrylic paintings could present the characteristics that oil and watercolor paintings did not have while realizing the techniques of them. Acrylic paintings have a broad development space in art creation, which is worth further attention and promotion.

• 한국습지학회지
• /
• 제26권2호
• /
• pp.139-146
• /
• 2024

노후된 관거 및 지하구조물의 균열 보수에 아스팔트계 주입재, 우레탄계 주입재, 시멘트계 주입재, 아크릴계 주입재 등 다양한 주입재가 사용되고 있다. 친환경적이고 습윤상태에서 경화가 잘되고 온도변화에 안정적인 물성을 갖는 아크릴계 누수 보수재에 대하여 연구하였다. 개량된 아크릴 누수 보수재와 기존 아크릴레이트 주입재의 성능 비교를 위하여 KS 규격의 실험방법에 준용하여 수중침지 길이변화율 시험, 수중 유실 저항성 시험, 내화학 성능시험을 실시하였다. 비교 실험해 본 결과 개량된 아크릴 누수 보수재는 기존 아크릴레이트 주입재보다 습윤상태, 온도변화, 화학적 반응에 따른 수축변화가 없었고 수중 저항성 실험에서 유실되지 않았다. 또한, 개량된 아크릴 누수 보수재의 환경적 영향성을 알아보기 위해 어류급성독성 실험과 급성경구독성 실험을 진행하여 관찰해 본 결과 실험체의 사망률이 없었고 특별한 유의점이 발견되지 않았다. 본 연구의 실험결과 개량된 아크릴 누수 보수재가 성능적으로 우수하고 환경적으로 안전하고 인체에 무해하다고 판단되었다. 본 연구의 다양한 실험결과 기존의 아크릴레이트 보수재보다 개량된 아크릴 누수 보수재가 관거 및 지하구조물 균열 부위의 보수재로 사용되기 적합하다고 사료된다. 본 연구는 아크릴 누수 보수재에 대한 적용성 평가에 대한 연구로 향후 기술 개발에 활용자료로 제안하고자 한다.

• 접착 및 계면
• /
• 제6권1호
• /
• pp.11-18
• /
• 2005

심물질(core)이 상변화물질(Phase Change Material, PCM)이고, 벽물질(shell)이 멜라민 포름알데히드 수지인 마이크로 캡슐을 제조하였다. 제조된 캡슐의 크기가 아크릴 코팅(acrylic coating)의 물성에 미치는 영향을 알아보기 위하여 PCM 캡슐의 크기를 $3{\sim}25{\mu}m$로 조절하여 제조하였다. 제조된 캡슐의 심물질 함량과 캡슐의 크기는 DSC와 SEM을 이용하여 확인하였다. 아크릴 에멀젼은 butyl acrylate, methyl metacrylate와 acrylic acid를 공중합하여 제조하였다. 제조된 PCM 캡슐과 아크릴 에멀젼을 혼합하여 필름으로 제조하였다. 캡슐의 크기가 작을수록 아크릴 코팅 필름 내에 캡슐이 잘 분산됨을 확인할 수 있었고, 캡슐의 크기가 클수록 필름 표면이 매끄럽지 않음을 관찰할 수 있었다. 필름의 수분 흡수율은 PCM 캡슐의 크기에 큰 영향을 받지 않았지만 필름의 인장 강도와 신율은 캡슐의 크기가 작을수록 증가하였다.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.52-59
• /
• 2000

In order to develop the transparent anti-static film with higher than 80% transparency to visible light, organic conductive compounds, N-methyl phenazinium 7,7,8,8-tetracyanoquinonedimethane (TCNQ) com-plex salts was synthesized and bar-coated on the polythylene terephthalate (PET) film using polymer binders. The best surface properties were obtained when acrylic binder was used. A single layer of TCNQ made of a acrylic binder showed a surface resistance of 10\ulcorner $\Omega$/ , a conductivity of 10\ulcorner S/cm, and a transparency of 75%. An optical microscopic examination revealed that the binder was first solidi-fied on the surface of PET film over which the needle-shaped TCNQ crystals were grown. An acrylic polyol coating over the TCNQ layer improved the transparency to 87%, becuase the acrylic polyol covers the surface of TCNQ crystals to reduce the surface roughness. This conductive material has thermal stability at room temperature and 4$0^{\circ}C$ over 4,000 h.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.86-94
• /
• 2015

A series of injection and drainage test were conducted on an circular acrylic tube to investigate the pressure generated by the accumulated fill materials inside a circular acrylic tube structure. The acrylic tube was filled by means of gravity filling with a slurry material having an average water content of 700%. The water head during the filling process was 1.8m and the bottom pressure during initial filling was 20.18kPa. The recorded stress at the sides of the acrylic tube was 17.89kPa during the filling process and was reduced to 13.58kPa during the leaving process. Continuous drainage of the acrylic tube has greatly influenced the stresses around the tube structure. As the water is gradually allowed to overflow, the generated pressure at the topmost pressure sensor of the tube was reduced further to 2.17kPa. Eventually, the initially liquid state slurry material transforms into plastic state after water has dissipated and substantial soil particles are deposited in the acrylic tube. The final water content of the deposited silt inside the acrylic tube after the test was 42%. It was found that the state of stresses(geo-static earth pressures) in the acrylic tube was anisotropic rather than isotropic.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.133-134
• /
• 2019

As part of recent low-energy policies, thermal insulation standards for buildings are being tightened every year. The importance of external insulation methods is increasing due to the strengthening of insulation standards. Among the main materials used in the external insulation method, dry bit material is a finishing material composed of an organic binder and aggregate. When the fire occurs, the ignition of the surface part causes a direct fire on the thermal insulation material at the rear side when heat energy is concentrated. Therefore, it is important that the finishing material in dry insulation using a dry bit has a low fire spreading property in case of a fire and does not have a sustained combustion. The purpose of this study was to evaluate the fire spreadability by changing the internal fillers while using alkoxide-based acrylic emulsions, hybrid acrylic emulsions, and general acrylic emulsions in order to suppress the fire spreading properties of exterior finish materials.

• 한국건축시공학회지
• /
• 제20권1호
• /
• pp.35-41
• /
• 2020

외단열 마감 공법에서 사용되는 얇은 바름재는 아크릴 에멀젼을 주 소재로 한 마감재이다. 본 연구에서는 실란 개질 아크릴 에멀젼과 실리카 분산아크릴 에멀젼을 치환하였을때 특성을 평가하였다. 실험결과, 실란 개질 아크릴 에멀젼은 인장강도 개선에는 큰 효과는 없었으나 부착강도, 물흡수계수, 온냉반복저항성의 성능 개선에 효과적인 것으로 나타났다. 실리카 분산 아크릴 에멀젼은 인장강도 개선에 효과적이며, 10%의 치환율에서는 부착강도, 물흡수계수, 온냉반복저항성의 성능 개선에 효과적인 것으로 나타났다. 이를 통해 아크릴 에멀젼의 성능을 향상할 수 있는 복합 에멀젼을 제조할 수 있는 것으로 판단되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.722-727
• /
• 2001

The dynamic characteristics of Viscoelastic(VE) damper are experimentally studied. An experimental test was carried out to study the effects of frequency on the damping and stiffness of VE damper. Various cyclic loading tests are conducted. A good agreement was achieved between the experimental results and analytical model proposed by Kasai et al. Also the damping of acrylic rubber is compared with that of PNR material. It was concluded that the damping value of acrylic rubber is higher than that of PNR material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.278-282
• /
• 1996

Electrical properties of acrylic acid and n-butyl acrylate grafted polyethylene were investicated. Charge accumulation characterist-ics of acrylic acid grafted PE are changed by graft ratio, but it remains not changed in n-butyl acrylate grafted PE. It was also observed that anti-treeing and AC breakdown strength of grafted PE were increased due to the graft ratio. The change of electrical properties of grafted PE were attributed to the polar group introduced by the graft reaction.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.1-10
• /
• 2003

Shredded waste newspapers, waste acrylic raw fibers, and urea-formaldehyde (UF) adhesives, at 10% by weight on raw material, were used to produce recycled waste paper-waste acrylic raw fiber composite boards in laboratory scale experiments. The physical and mechanical properties of fire retardant treated recycled waste paper-waste acrylic raw fiber composite boards were examined to investigate the possibility of using the composites as internal finishing materials with specific gravities of 0.8 and 1.0, containing 5, 10, 20, and 30(wt.%) of waste acrylic raw fiber and 10, 15, 20, and 25(wt.%) of fire retardant (inorganic chemical, FR-7^®) using the fabricating method used by commercial fiberboard manufacturers. The bending modulus of rupture increased as board density increased, decreased as waste acrylic raw fiber content increased, and also decreased as the fire retardant content increased. Mechanical properties were a little inferior to medium density fiberboard (MDF) or hardboard (HB), but significantly superior to gypsum board (GB) and insulation board (IB). The incombustibility of the fire retardant treated composite board increased on increasing the fire retardant content. The study shows that there is a possibility that composites made of recycled waste paper and waste acrylic raw fiber can be use as fire retardant internal finishing materials.