• Journal of the Korean Solar Energy Society
• /
• v.22 no.3
• /
• pp.67-76
• /
• 2002

Data-Acquisition systems are widely used in Photovoltaic(PV) system application in order to analyze and optimize the performance of PV systems. In this paper, the development of a computer-based data-acquisition system and its application are described. The proposed Computer-based data-acquisition System consists of a set of sensors for measuring both environmental and electrical parameters. The collected data are first conditioned and then interfaced to PC using a data-acquisition card. The Labview program was used to further process, display on the monitor at real time and store on the hard disk. We designed and installed two stand-alone PV systems to supply different loads, which in this case a Low Pressure Sodium(LPS) 55 [W] lamp and a electrodless 55 [W] lamp. When the proposed data acquisition system is applied on the designed PV systems, Optimized system operation methods are investigated to confirm a stable load availability and extend battery life time.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.182-189
• /
• 2018

The purpose of this paper is to suggest the methodology for the establishment of operational concept for speed-up of defense robot and improvement direction of the defense acquisition system for the defense robot. In order to achieve this goal, the current defense acquisition system was analyzed into long-term planning, mid-term programming, and project execution stages. And I suggest the methodology for the establishment of operational concept for speed-up of defense robot and direction of development of the defense robot acquisition system considering the characteristics of the robot in terms of core technologies of robot, robot ecosystem and effectiveness-based-robot-design, respectively. Based on the methodology for establishment of the operational concept of defense robot and development direction of the defense acquisition system presented in this study, it will be possible to design efficiently the defense robot in the future.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2007

In this paper, we analyze the performance of double-dwell hybrid initial acquisition in a direct sequence ultra-wideband (DS-UWB) system via detection, miss, false alarm probabilities, and mean acquisition time. In the analysis, we consider the effect of the acquisition sequence as well as the deployment scenario of the abundant multipath components over small coverage of the piconet in the DS-UWB system. Based on the simulation, we obtain various performance measures for the mean acquisition time by varying parameters such as the total number of hypotheses to be searched, subgroup size, and dwell time. We thereupon suggest the optimum parameter set for the initial acquisition in the DS-UWB system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.723-730
• /
• 2000

In this paper, we perform a performance analysis of serial acquisition scheme using AWGN rejection filter in Rayleigh fading channel and propose robust acquisition scheme using Reference filter, which is utilized to vary threshold at fading rate, in Rayleigh fading channel. AWGN rejection filter is utilized to evaluate running average for compensating channel gain. The JAKE model, which a channel model, is used for the analysis. The simulation result shows that the mean acquisition time of the proposed acquisition system is minimized than acquisition system using AWGN rejection filter and serial-search acquisition system.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.743-746
• /
• 1998

In this paper, we developed an outdoor augmented reality system which has remote real scences acquisition ability. The real scenes acquisition system consists of image acquisition system, tracking system, wireless data transceiver and power supply. Tracking system that consists of Tans Vector and RT-20 measures a position and attitude of the CCD camera that attached at the remote control helicopter. Wireless data transceiver system is utilized for data transmission of remote system that of attitude, position information, andreal scenes data that acquired by the CCD camera. Maximum propelling power of remote control helicopter is 15Kg, so we used 7.2V li-ion cell as a power supply for system minimize. As the results of experiment, the developing system presented application possibility of remote information acquisition system such as construction simulation & estimation, broadcasting, tour guide.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.33-38
• /
• 1989

This paper is about construction of Data Acquisition System for Gyro-System which obtains the information such as position, velocity, acceleration and attitude etc of Dynamic Vehicle System. We made up the Data Acquisition System using IBM-PC and in connection with CYBER 180-830 based on rate table, controller and IEEE 488 Interface etc.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.198-213
• /
• 2012

Navy ship acquisition management business contributed to the korean Navy and defense exports with government suppliers in Korea for over 40 years. But due to advanced technology, development trend of Navy ship and defense export requirements, it enable to make a contribution to a better system improvement are being demanded. In this paper, an adjective Navy ship acquisition process is presented in order to improve the acquisition process takes the first step for acquisition planning process to enhance the efficiency and rationality that is based on consensus of Navy ship expert and experienced. In addition, systems engineering (SE) and quality control (QC) techniques based on Modeling and Simulation are investigated to carry out efficient project management and scientific quality control system in Navy ship acquisition process. Finally, it is suggested to apply SE/QC based on M&S for Navy ship acquisition process using civilian infrastructure and organizations in order to take advantage of the world's leading domestic industry based on considering the difficult conditions of Navy ship suppliers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.851-858
• /
• 2012

In this paper, we design a seismic data acquisition system(SDAS) and implement it. This system is essential for development of a noble local earthquake disaster preventing system in population center. In the system, we choose a proper MEMS-type triaxial accelerometer as a sensor, and FPGA and ARM processor are used for implementing the system. In the SDAS, each module is realized by Verilog HDL and C Language. We carry out the ModelSim simulation to verify the performances of important modules. The simulation results show that the FPGA-based data acquisition module can guarantee an accurate time-synchronization for the measured data from each axis sensor. Moreover, the FPGA-ARM based embedded technology in system hardware design can reduce the system cost by the integration of data logger, communication sever, and facility control system. To evaluate the data acquisition performance of the SDAS, we perform experiments for real seismic signals with the exciter. Performances comparison between the acquired data of the SDAS and the reference sensor shows that the data acquisition performance of the SDAS is valid.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.395-404
• /
• 2013

Purpose: Technology readiness assessment(TRA) used as a standard readiness assessment tool in the acquisition program of weapon system has some limitations in the comprehensive understanding of the complex system. Therefore, this research is intended to suggest a holistic maturity assessment method for the acquisition of high quality weapon system. Methods: Technology readiness level(TRL), manufacturing readiness level(MRL), integration readiness level(IRL) and system readiness level(SRL) developed to assess system maturities in the various aspects are compared and analyzed to draw an improvement avenue for the current readiness assessment method. Results: TRL, MRL, IRL and SRL have large differences in their maturity targets during the acquisition life cycle: technological performance, manufacturing capability, interface between components and total system, respectively. They complement one another's shortcomings Conclusion: To achieve a successful acquisition of high quality weapon system, multi-dimensional readiness assessment is required. Therefore, comprehensive readiness assessment using TRL, MRL, IRL and SRL will contribute to the acquisition of high quality weapon system through the accurate maturity information of overall system.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.223-226
• /
• 2002

Data Acquisition System of Cargo System using a large output X-ray in harbors is usually composed of Detector, Analog Board, Digital Board, Master Board, Backplane Board and Image Construction System. In this paper we have made an image of material in container-box with Data Acquisition System and studied mainly a configuration method and principle to each part of Data acquisition system.