• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1515-1526
• /
• 2019

Ear-piercing high-frequency noise from electromagnetic vibrations in motors has become unacceptable in sensitive environments, due to the application of pulse width modulation (PWM) and in consideration of switching losses. This paper proposed a synchronous periodic frequency modulation (SPFM) method based on the interleaving technique for paralleled three-phase voltage source inverters (VSIs) to eliminate PWM vibration noise. The proposed SPFM technique is able to effectively remove unpleasant high-frequency vibration noise as well as acoustic noise more effectively than the conventional periodic carrier frequency modulation (PCFM) and interleaving technique. It completely eliminates the vibration noise near odd-order carrier frequencies and reduces the PWM vibration noise near even-order carrier frequencies depending on the switching frequency variation range. Furthermore, the SPFM method is simple to implement and does not employ additional circuits in the drive system. Finally, the effectiveness of the proposed method has been confirmed by detailed experimental results.

• Korean Linguistics
• /
• v.81
• /
• pp.267-297
• /
• 2018

Vowel raising in Korean has been primarily treated as a phonological, categorical change. This study aims to show how the Korean connective suffix {-go} is realized in various environments, and propose a principle of vowel raising based on both acoustic and perceptual data. To that end, we used a corpus of spoken Korean to analyze the types of syntactic constructions, the realization of prosodic boundaries (IP and PP), and the types of boundary tone associated with {-go}. It was found that the vowel tends to be raised most frequently in utterance-final position, while in utterance-medial position the vowel was raised more when the syntactic and prosodic distance between {-go} and the following constituent was smaller. The results for boundary tone also showed a correlation between vowel raising and the discourse function of the boundary tone. In conclusion, we propose that vowel raising is not simply an optional phenomenon, but rather a type of phonetic reduction related to the comprehension of the following constituent.

• Ocean and Polar Research
• /
• v.41 no.1
• /
• pp.11-18
• /
• 2019

This acoustic experiment noted that fish species in Chilam-Gijang marine ranching area were more densely distributed in the pelagic zone during nighttime than daytime. In each season, the gill nets caught 15 different fish species and the estimated average target strengths were -44.0 dB and -44.4 dB for autumn and winter surveys, respectively. The estimated autumn fish biomass were 7.7 tons and 26.0 tons during daytime and nighttime, respectively. Winter biomass was 2.27 tons and 30.97 tons during daytime and nighttime, respectively. Different fish species form schools that exhibit different movements and behaviors, and thereby occupy varying water layers. These results explained the estimated fish biomass, and variation with seasons and time of the surveys around artificial reefs in Chilam Bay, Korea.

• Ocean Systems Engineering
• /
• v.10 no.4
• /
• pp.435-449
• /
• 2020

This paper proposes a method to estimate the underwater target object's yaw angle using a sonar image. A simulator modeling imaging mechanism of a sonar sensor and a generative adversarial network for style transfer generates realistic template images of the target object by predicting shapes according to the viewing angles. Then, the target object's yaw angle can be estimated by comparing the template images and a shape taken in real sonar images. We verified the proposed method by conducting water tank experiments. The proposed method was also applied to AUV in field experiments. The proposed method, which provides bearing information between underwater objects and the sonar sensor, can be applied to algorithms such as underwater localization or multi-view-based underwater object recognition.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.22-31
• /
• 2013

In this paper, we propose a method that estimates the channel response from underwater communication signals with MMSE (Minimun Mean Squared Error) and detects dominant components automatically based on power of response components using CFAR (Constant False Alarm Rate). Statistical characteristics are analyzed with variation of magnitude and phase and time coherence via experimental data obtained by drifting transmitter and receiver. We show that bit error rate has small difference, 1.2 times, compared with the case using every channel information estimated within data period when estimation and equalization is performed with extracted characteristic obtained by the proposed method.

• Phonetics and Speech Sciences
• /
• v.10 no.1
• /
• pp.75-81
• /
• 2018

Diplophonia is generally defined as the perception of more than one fundamental frequency component in a voice. Its perceptual aspect has traditionally been used to evaluate diplophonia because the perceptions can be easily evaluated, but there are limitations in the validity of the reliability of the intra- and inter-raters, examination situation, and variation of voice sample. Therefore, the purpose of this study is to confirm the reliability and accuracy of auditory perceptual evaluation by comparing non-invasive indirect assessment methods (sound waveform and EGG analysis), and to identify their usefulness with diplophonia. A total of 28 diplophonic voices and 39 non-periodic voices were assessed. Three raters assessed the diplophonia by performing an auditory perception evaluation and identifying the quasi-periodic perturbations of the acoustic waveform and EGG. Among the three discrimination methods, intra- and inter-rater reliability, sensitivity, specificity, accuracy, positive likelihood ratio, and negative likelihood ratio were examined, and the McNemar test was performed to compare the discriminant agreement. The accuracy of the auditory perceptual evaluation (86.57%) was not significantly different from that of sound waveform acoustic (88.06%), but it was significantly different from that of EGG (83.33%). The reading time (6.02 s) for the auditory perceptual evaluation was significantly different from that for sound waveform analysis (30.15 s) and EGG analysis (16.41 s). In the discrimination of diplophonia, auditory perceptual evaluation has sufficient reliability and accuracy as compared to sound waveform and EGG. Since immediate feedback is possible, auditory perceptual evaluation is more convenient. Therefore, it can continue to be used as a tool to discriminate diplophonia in clinical practice.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.2
• /
• pp.146-153
• /
• 2017

Sediment flow through hydropower components causes hydro-abrasive erosion resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance. Online instruments are required to measure/capture the variations in sediment parameters along with collecting samples manually to analyse in laboratory for verification. In this paper, various sediment parameters viz. size, concentration (TSS), shape and mineral composition relevant to hydro-abrasive erosion were measured and discussed with respect to a hydropower plant in Himalayan region, India. A multi-frequency acoustic instrument was installed at a desilting chamber to continuously monitor particle size distribution (PSD) and TSS entering the turbine during 27 May to 6 August 2015. The sediment parameters viz. TSS, size distribution, mineral composition and shape entering the turbine were also measured and analysed, using manual samples collected twice daily from hydropower plant, in laboratory with instruments based on laser diffraction, dynamic digital image processing, gravimetric method, conductivity, scanning electron microscope, X-ray diffraction and turbidity. The acoustic instrument was able to capture the variation in TSS; however, significant deviations were found between measured mean sediment sizes compared to values found in the laboratory. A good relation was found for turbidity ($R^2=0.86$) and laser diffraction ($R^2=0.93$) with TSS, which indicated that turbidimeter and laser diffraction instrument can be used for continuous monitoring of TSS at the plant. Total sediment load passed through penstock during study period was estimated to be 15,500 ton. This study shall be useful for researchers and hydropower managers in measuring/monitoring sediment for hydro-abrasive erosion study in hydropower plants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1035-1044
• /
• 2010

Head-related transfer function (HRTF) is an acoustic transfer function from a sound source to the ear canal entrance position. HRTFs are very important information in the construction of virtual sound fields. HRTFs also vary for different individuals. In this study, characteristics of HRTF for an average Korean are investigated numerically by comparing with the HRTF for a standard Knowles Electronics Manikin for Acoustic Research (KEMAR). A boundary element (BE) model for an adult Korean is developed using the computerized tomography (CT) data in order to investigate the variation in HRTFs for different individuals. The boundary conditions of the BE model are identified by comparing the numerical results with the experimental results. The numerical model shows that accurate HRTFs can be calculated efficiently over full audible frequency range for individuals.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.600-606
• /
• 1999

A reactive type acoustic filter is developed based on the phase cancellation effect which is occurring in the plane wave propagation through the two paths where the cross sectional areas are reversely changing. The theory is experimentally validated by the use of a cylindrical duct and an inserted hollowed cone of which vertex part is eliminated. Noise attenuation and the filtered frequency are dependent on the area variation and the effective length of the filter. Experimental comparison shows that the filtered frequencies of 1st and 2nd mode are lower than the analytical prediction due to the mass loading effects, and the 3rd mode is in good agreement. The proposed filter can be applied as an in-duct noise filter for improving the sound quality in a narrow space for various industrial applications.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.509-517
• /
• 2013

In this paper, we researched a method that makes a good acoustic-speech system using a digital signal processing technique with dynamic microphone as a transducer. Good acoustic-speech system should deliver the original sound input to electric signal without distortion. By measuring the frequency response of the microphone, adjustment factors are obtained by comparing measured data and standard frequency response of microphone for each frequency band. The final sound levels are obtained using the developed adjustment factors of frequency responses from the microphone and speaker to match the original sound levels using the digital signal processing technique. Then, we minimize the changes in the frequency response and level due to the variation of the distance from source to microphone, where the frequency responses were measured according to the distance changes.