• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.938-941
• /
• 2006

We present a new design method of one-dimensional multi-layered acoustic foams for transmission loss maximization by topology optimization. Multi-layered acoustic foam sequences consisting of acoustic air layers and poroelastic material layers are designed for target frequency values. For successful topology optimization design of multi-layered acoustic foams, the material interpolation concept of topology optimization is adopted. In doing so, an acoustic air layer is modeled as a limiting poroelastic material layer; acoustic air and poroelastic material are handled by a single set of governing equations based on Biot's theory. For efficient analysis of a specific multi-layered foam appearing during optimization, we do not solve the differential equations directly, but we use an efficient transfer matrix approach which can be derived from Biot's theory. Through some numerical case studies, the proposed design method for finding optimal multi-layer sequencing is validated.

• 한국정보과학회논문지:정보통신
• /
• 제37권2호
• /
• pp.150-156
• /
• 2010

오디오 워터마킹이란 오디오 신호에 귀에 들리지 않게 정보를 삽입하는 과정을 말하며, 주로 저작권 보호 목적에 이용되어 왔다. 본 연구에서는 오디오 워터마킹을 저작권 보호가 아닌 사용자 편의를 위한 부가 정보 전송이라는 목적에 이용하고자 하며, 이러한 목적에 적합한 오디오 워터마킹 알고리듬을 제안한다. 본 연구에서 제안하는 오디오 워터마킹 알고리듬은 공기 중 음향 전송을 통해 스피커로부터 모바일 장치로 부가 정보를 전송하는 방식이며, 오디오 신호의 에너지 변조를 이용한 워터마크 삽입/추출 방법 및 2단계에 걸친 효율적인 동기화 방법을 포함한다. 제안된 알고리듬은 스피커 시스템과 휴대폰 단말기를 이용한 실험을 통해 그 성능을 평가하였으며, 실험 결과 5m 거리에서 성공적으로 부가 정보를 전송이 가능함을 확인하였다. 이는 기존의 방식보다 높은 성능이다.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.914-922
• /
• 2002

Thermo-acoustic waves can be thermally generated in a compressible flow field by rapid heating and cooling, and chemical reaction near the boundary walls. This mechanism is very important in the space environment in which natural convection does not exist. Also this may be a significant factor for heat transfer when the fluids are close to the thermodynamic critical point. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air-filled confined domain with two-step pulsed heating are studied numerically. The governing equations are discretized using control volume method, and are solved using PISO algorithm and second-order upwind scheme. For the purpose of stable solution, time step was set to the order of $1\times10_-9s,\;and\;grids\;are\;50\times2000$. Results show that temperature and pressure distributions of fluid near the boundary wall subjected to a rapid heating are increased abruptly, and the induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. Pressure waves have sharp front shape and decay with a long tail in the case of step heating, but these waves have sharp pin shape in the case of pulsed heating.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.662-667
• /
• 1994

This paper presents the design and construction details of a soundproof enclosure for housing 20 KVA diesel generator-set. As the generator had to be installed close to the hospital building, it was desirable to reduce the transmission of noise by housing the generator in such an enclosure. The diesel engine being an air cooled one, it was essential to supply fresh air into the enclosure for its cooling. Forced inflow of air is provided through an inlet duct located in such a way that the incoming fresh air is thrown close to the inlet of cooling fan of the engine. The high velocity air stream, which heats up while passing over the engine head, escapes to the atmosphere through a rectangular outlet duct with enlarges inlet that receives hot air from the engine. The air ducts were designed specially and have been provided with acoustic lining for sound absorption. The masonary enclosure has been provided with double glazed fixed windows and double doors. The exhaust pipe of the engine fitted with a muffler has been taken out through the enclosure wall facing away from the hospital. Acoustic performance studies conducted in terms of attenuation provided by the enclosure at different frequencies have also been presented and discussed. The noise control measures adopted for building the sound-proof enclosure have been found to be quite effective as the noise levels inside the hospital building are now within the acceptable limits.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.569-569
• /
• 2014

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. This paper presents a numerical analysis method for a simplified vehicle model. The internal air cavity including trim component are included in the simulation. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using CFD Code. The second step consists in the computation of the vibro-acoustic transmission through the window using the finite element vibro-acoustic solver Actran.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.261-269
• /
• 2024

본 논문에서는 흡음형 소음기의 음향성능을 향상시키기 위해 다층 흡음재 배치 순서를 최적화하였다. 소음기의 음향성능은 투과손실로 판단하였으며, 투과손실을 계산하기 위해 유한요소법 기반 수치해석 프로그램을 사용하였다. 흡음재는 흡음형 소음기에서 많이 사용되는 다공탄성 물질인 폴리우레탄을 사용하였으며, 내부에 공기가 흐르는 상황을 가정하여 Biot-Allard 모델을 적용하였다. 2 kHz 대역까지 관심주파수 영역을 설정하여 흡음재가 단층으로 구성되어 있을 때 음향성능에 영향을 주는 물성치를 확인하였으며, 폴리우레탄 물성치를 바탕으로 단층 및 다층 흡음재를 가진 소음기의 음향성능을 서로 비교하였다. 이후 Nelder-Mead 방법을 적용하여 소음기 내 다층 흡음재의 배치 순서를 최적화하였으며, 단층 흡음형 소음기에 비해 평균 투과손실이 증가하는 것을 확인하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.

• 에너지공학
• /
• 제12권1호
• /
• pp.29-34
• /
• 2003

압력파의 일종인 열음향파는 압축성유체를 급속히 가열 또는 냉각하는 경계면 근처에서 유체가 순간적으로 압축 및 팽창하는 경우에 발생하는 현상으로 자연대류가 일어나지 않는 우주공간에서는 매우 중요한 열전달 메커니즘이다. 본 연구에서는 공기로 채워진 공간에서 급속한 가열에 의하여 발생한 열음향파의 전달특성을 수치적인 방법에 의하여 평가하고자 유한체적법을 기반으로 비정상 지배방정식을 이산화하였으며, PISO알고리즘과 2계 상향기법을 적용하여 해석을 수행하였다. 안정적인 수치해는 50 $\times$ 800 개의 셀과 1 $\times$ $10^{-9}$ 시간간격을 적용하여 얻을 수 있었으며, 생성된 열음향파는 유체 속을 통과하면서 점성과 열소산에 의하여 점점 감쇠하여 가는 경향을 보였다. 생성된 압력파는 날카로운 전단과 점점 감소하여 길게 늘어지는 후단부를 갖는 형상을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.858-861
• /
• 2006

In this paper, a study on the noise reduction in a mobile fuel cell system is presented. Among various fuel cell systems around 20W capacities designed for mobile electronic devices, the active direct methanol fuel cell (DMFC) systems have been recently developed. In such systems, the primary noise source is the air pump which provides sufficient air flow ($5{\sim}6$ liter/min) for electrochemical reaction with methanol fuel while the noise contributions from other auxiliary parts are relatively small. Especially, the discrete noise tones generated by the air pump are dominant and those frequency peaks related to the rotor harmonics are needed to be suppressed by a silencer. Therefore. the Herschel/Quinke (HQ) tubes, which use the out-of-phase cancellation of acoustic waves propagating through direct and indirect pathways, are applied to the inlet of the air pump. Performance of noise reduction with HQ silencer is analytically estimated by calculating the transmission. The length and number of thin HQ tubes are optimized to decrease the radiated noise. As a result, the sound pressure level could be successfully reduced by about 10 dB after applying three serially connected HQ tubes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.291-291
• /
• 2013

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. HMC is interested in the numerical prediction of this aerodynamic noise generated by the car windows with the final objective of improving the products design and reducing this noise. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using the CAA(Computational aeroacoustics) solver CAA++. The second step consists in the computation of the vibro-acoustic transmission through the side window using the finite element vibro-acoustic solver Actran. The internal air cavity including trim component are included in the simulation. In order to validate the numerical process, an experimental set-up has been created based on a generic car shape. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. First, this paper describes the method including the CAA and the vibro-acoustic models, from the boundary conditions to the different components involved, like the windows, the trims and the car cavity is detailed. In a second step, the experimental set-up is described. In the last part, the vibration of the windshield and windows, the total wind noise level results and the relative contributions of the different windows are then presented and compared to measurements. The influence of the flow yaw angle (different wind orientation) is also assessed.