• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.805-815
• /
• 2008

Transfer path analysis(TPA) and panel contribution analysis(PCA) have been used widely to reduce interior noise of mechanical systems. TPA enables us to decompose interior noise into air-borne and structure-borne noises and estimate the path contribution of noise sources. PCA is also used to identify the noise contribution of each sub-panel in vibro-acoustic systems. In this paper, TPA and PCA are applied to wheel loader, one of the heavy construction equipments. Firstly, TPA for air-borne noise is conducted to estimate the contribution of air-borne sources using pressure transfer function. Thereafter, TPA for structure -borne noise is employed to verify the results of air-borne source quantification through the synthesis of two results. Secondly, PCA is performed by both TPA using pressure transfer function between panels inside the cabin and boundry element method(BEM) for the cabin of wheel loader with various boundary conditions. As a results, it was found that TPA conducted by experiments and PCA accomplished by both experiments and BEM are very effective methods in analyzing the path and contribution of the noises for reducing an interior noise level in the wheel loader system.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.435-449
• /
• 2020

This paper proposes a method to estimate the underwater target object's yaw angle using a sonar image. A simulator modeling imaging mechanism of a sonar sensor and a generative adversarial network for style transfer generates realistic template images of the target object by predicting shapes according to the viewing angles. Then, the target object's yaw angle can be estimated by comparing the template images and a shape taken in real sonar images. We verified the proposed method by conducting water tank experiments. The proposed method was also applied to AUV in field experiments. The proposed method, which provides bearing information between underwater objects and the sonar sensor, can be applied to algorithms such as underwater localization or multi-view-based underwater object recognition.

• 한국음향학회지
• /
• 제16권2호
• /
• pp.10-15
• /
• 1997

수중 청음기는 진동하는 물체 위에 설치되어 다양한 외부 잡음 원이 유입되는 환경에 노출되어 있다. 외부 잡음 원으로는 수중 청음기가 설치된 구조물 자체의 진동, 프로펠러 잡음, 그리고 유동 유기 잡음들이 있고, 이들 외부 잡음원은 실제 강도가 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 연구에서는 외부 잡음에 무관한 고 정밀도, 저 잡음 특성을 갖는 수중 청음기를 개발하기 위하여 유한 요소법(FEM)을 사용하여 잡음 전달 특성의 분석 및 air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 개선된 구조의 수중 청음기를 설계하고, 내 잡음성 평가를 하였다. 그 결과 센서 측면 하단부에 잡음 원이 위치할 경우 가장 큰 잡음 신호로 작용하므로 구조를 변경한 결과 기존 수중 청음기에 비해 59% 이상 내 잡음성을 증진 시켰다.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.1-8
• /
• 2021

This paper presents research on methods for the reduction of forklifts' noise level for the increased comfort and safety of its operator. A cooling fan with a high air volume flow rate installed in the forklift acts as an important design parameter which efficiently cools the heat exchanger system, helping to transfer internal heat from the engine room to the outdoors with both transmitted and diffracted opening noises. The cooling fan contributes significantly to both the forklift's emitted sound power and the operator room's noise level, thereby necessitating research on the forklift's reduction of acoustic power level and transmission. A noise analysis for various fan models with a biomimetic design based on eagle-wing geometry was conducted. In addition to the acoustic power generation, the aerodynamic performance of the cooling blade is also strongly influenced by the design of airfoil distribution, thereby requiring optimization. The cooling fans were fabricated and installed in the forklift in order to check the efficacy of the forklift engine's cooling, and the final version of the fan was measured for its ability to lower acoustic power level and cool the engine room. This study explains the aerodynamic and acoustic features of the designed fans with the use of BEM analysis and forklift test results.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.179-189
• /
• 2000

최근 들어 심해개발에 대한 관심이 고조됨에 따라 AUV 또는 수중 로봇과 같은 수중 무인작업선의 개발을 위하여 많은 노력을 하였다. 본 논문은 초음파의 전송지연을 고려하지 않고 최대 처리량의 일정수준을 확보하고 다중 초음파 통신 채널을 통하여 고속의 데이터 전송이 가능한 새로운 고효율의 음향 기반 수중 영상 통신시스템을 제시한다. 제시된 시스템은 중심주파수가 136khz이고 10khz의 밴드 폭에서 동작하는 음향 트랜스듀서, 전단증폭기, $\pi/4 QPSK$ 변복조 방식, JPEG 기술을 사용한 영상 압축방식과 수정된 Stop & Wait 프로토콜로 구성한다. 실험 결과는 수조 테스트에서 고효율의 수중영상 전송이 가능하였고, 또한 그 결과는 기존에 개발된 시스템과 타당한 전송성능을 비교 입증하였고 해양에서 실용 가능성을 연구 검토하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.694-698
• /
• 2006

This paper presents an optimal design process using beads on a body panel to improve interior noise of a passenger vehicle. Except modification of structural members, it is difficult to find effective countermeasures that can work for the intermediate frequency range from 100 Hz to 300 Hz which lies between the booming and low medium frequency. In this study, it is a major goal to find additional counter-measures for this intermediate frequency range by performing optimal design of beads on body panels. The proposed method for design optimization consists of 4 sub-steps, that is, a) problem definition, b) cause analysis, c) countermeasure development and d) validation. The objective function is minimization of interior noise level. The major design variables are the geometrical shape of a bead and combination of beads on the critical panels. Sensitivity analysis and optimization are performed according to the predefined process for an optimal design. It is verified that the proposed design decreases the level of noise transfer function above 5 dB.

• 소음진동
• /
• 제9권4호
• /
• pp.687-692
• /
• 1999

Digital holographic reconstruction method [W. A. Veronesi, et al, 1989, JASA, Vol. 85, pp. 588∼598] reconstructs a whole sound field by using measured sound pressure. This paper reports numerical errors of the method that occur at specific frequencies. The errors occur due to the truncation errors included in the calculation of transfer matrixes. The frequencies of the errors depend on the size of boundary element surfaces. Moreover, a modified calculation technique is proposed in the paper. The technique prevents the truncation errors by employing an indirect calculation procedure.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.405-412
• /
• 2002

Recently, regulations of the government and concerns of people give rise to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software with hybrid method was developed at first. Secondly, robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radios of each component that was thought to effect on the capacity of intake system was selected. The factors were arranged by using L18 table of orthogonal array and optimum value was obtained.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.218-226
• /
• 2019

In modern society, people live in an environment with artificial or natural noise. Especially, the sound that corresponds to the artificial noise makes the noise itself and affects each other because many people live and work in the city. Sounds are generated by the activities and causes of various people, such as construction sites, aircraft, production machinery, or road traffic. These sounds are essential elements in human life and are recognized and judged by human auditory organs. Noise is a sound that you do not want to hear by subjective evaluation, and it is a loud sound that gives hearing damage or a sound that causes physical and mental harm. In this study, we introduce the method of stimulating the human hearing by finger vibration and explain the advantages of the proposed method in various kinds of a noise environment. And how to improve the sound quality to improve efficiency. In this paper, we propose a method to prevent the loss of hearing loss and the transmission of sound information based on proper signal to noise ratio when using portable IT equipment in various noise environments.