• 제목/요약/키워드: Acoustic Pressure Field

검색결과 254건 처리시간 0.03초

격자 볼츠만 기법을 이용한 선체 부가물 유동소음해석 (Flow Noise Analysis of Hull Appendages Using Lattice Boltzmann Method)

  • 여상재;홍석윤;송지훈;권현웅
    • 해양환경안전학회지
    • /
    • 제26권6호
    • /
    • pp.742-750
    • /
    • 2020
  • 선체 부가물에서 발생하는 유동소음은 자체소음 관점에서 소나의 성능과 직결되고, 추진기 및 방향타와 상호작용을 통해 2차 소음원을 야기해 근접장 범위의 엄밀한 분석이 요구된다. 하지만 유동소음 해석에 적용되는 기존의 음향상사법은 음향 신호의 전파를 직접 모사하지 않는 간접법에 해당해 회절, 반사, 산란 특성을 고려할 수 없으며, 근접장 해석이 제한적이다. 본 연구에서는 격자 볼츠만 기법을 적용해 수중환경 유동소음의 전파과정을 직접 모사하였다. 격자 볼츠만 기법은 분자의 충돌과 흐름 과정을 통해 유동소음을 해석하는 기법으로, 압축성과 낮은 소산율, 낮은 분산율의 특성을 가지고 있어 소음해석에 적합하다. 선체 부가물 형상을 대상으로 RANS 해석을 통해 유동소음원을 도출하고, 유동-음향 경계면을 적용한 격자 볼츠만 기법으로 유동소음의 전파과정을 직접적으로 모사했다. 도출된 결과를 수음점의 위치에 따라 FW-H 결과 및 유체동압력 결과와 비교를 통해 근접장에서 타 기법 대비 격자 볼츠만 기법의 유용성을 확인했다.

학교 교실의 음환경 기준에 따른 실내마감 방안 (Interior surface treatment guidelines for classrooms according to the acoustical performance criteria)

  • 류다정;박찬재;한찬훈
    • 한국음향학회지
    • /
    • 제35권2호
    • /
    • pp.92-101
    • /
    • 2016
  • 교실 음환경은 학생들에게 매우 중요한 요소로 학습효과와 학업 성취에 매우 큰 영향을 미친다는 연구결과가 다수 발표되고 있다. 그러나 학교 교실의 신축이나 리모델링 시에 가이드라인 및 설계방안이 제시된 바 없어 적절한 음환경을 실현하는데 큰 어려움을 겪고 있다. 따라서 본 연구에서는 이론적 수식과 현장실험을 통하여 교실의 음환경 기준을 만족하기 위한 다양한 설계방안을 제시하고자 한다. 이를 위해 국내 중 고등학교의 교실에서 실내음향성능 기준을 만족하기 위해 필요한 최소 흡음면적을 계산하였다. 또한 교실의 천장 및 뒷벽의 다양한 마감상태에 따른 실내음향성능을 알아보고자 현장실험을 진행하여 실험 결과를 비교 분석하였다. 연구 결과, 국내 교실 천장에 현재 거의 모든 학교에서 시행하고 있는 것처럼 천정흡음재를 설치하지 않아도 잔향시간 기준인 0.8 s를 만족할 수 있는 것으로 나타났다. 특히, 천장 일부 면적에 반사재를 적용하되 면적의 비율이 흡음 2 : 반사 1이면서 가로로 구획하는 것이 음압레벨을 향상시키며 전체가 흡음인 경우와 비슷한 명료도[$C_{50}$, $D_{50}$, RASTI(Rapid Speech Transmission Index)]를 확보할 수 있다.

고 받음각 2차원 NACA0012 에어포일 주위의 비정상 공기역학적 특성 (Unsteady Aerodynamic characteristics at High Angle of Attack around Two Dimensional NACA0012 Airfoil)

  • 유재경;김재수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2011년 춘계학술대회논문집
    • /
    • pp.414-419
    • /
    • 2011
  • Missile am fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 60 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure distribution, etc. are analyzed according to the angle of attack. The results at a low angle of attack are compared with other results before a stall condition. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. Unsteady velocity field, periodic vortex shedding, the unsteady pressure distribution on the airfoil surface, and the acoustic fields are analyzed. The effects of these unsteady characteristics in the aerodynamic coefficients are analyzed.

  • PDF

버너 출구의 형상변화에 따른 난류 예혼합 화염의 특성에 관한 LES 연구 (LES Studies on the Characteristics of Turbulent Premixed Flame with the Configurations of Burner Exit)

  • 황철홍;이창언
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.96-104
    • /
    • 2006
  • In the present paper, the effects of combustion instability on flow structure and flame dynamic with the configurations of burner exit in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. As a result of mean flow field, the change of divergent half angle(${\alpha}$) at burner exit results in variations in the size and shape of the central toroidal recirculation(CTRZ) as well as flame length by changing corner recirculation zone(CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than that of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is the most shortest, while that in the case of ${\alpha}=30^{\circ}$ is the longest by the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it is identified that the case of ${\alpha}=45^{\circ}$ shows the most largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, comparing with that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons are discussed in detail through the analysis of unsteady phenomena about recirculation zone and flame surface. Finally the effects of flame-acoustic interaction are evaluated using local Rayleigh parameter.

  • PDF

축류팬의 유동소음 정확도 향상을 위한 수치해석에 관한 연구 (A study on the numerical method to predict the accurate aeroacoustic noise on axial fan)

  • 전완호;임태균;미노리가와 가쿠
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 춘계학술대회 논문집
    • /
    • pp.311-318
    • /
    • 2013
  • The paper describes the prediction method for the unsteady flow field and the aeroacoustic noise of an small axial fan. The prediction method is comprised of various CFD conditions and acoustic analogy by using Ffowcs Williams-Hawkings equation. The diameter of tested axial fan is 170 mm and number of blade is 5. Virtual anechoic room which has same size with real one was used for CFD. URANS and LES models were used. For mesh dependence study, a different mesh type was tested and optimized mesh was selected. Calculation conditions were also studied such as time step and turbulence model for accurate noise analysis. In this paper, we got optimum analysis conditions and computational results. The unsteady pressure fluctuation at given 4 points were compared between the measured data and computational results. Also, the predicted acoustic spectrum at 3 given microphone points were compared with measured ones.

  • PDF

Ultrasonic Targeting of NK Cell in Vessel Bifurcation for Immunotherapy: Simulation and Experimental Validation

  • Saqib Sharif;Hyeong-Woo Song;Daewon Jung;Hiep Xuan Cao;Jong-Oh Park;Byungjeon Kang;Eunpyo Choi
    • 센서학회지
    • /
    • 제32권6호
    • /
    • pp.418-424
    • /
    • 2023
  • Natural killer (NK) cells play a crucial role in combating infections and tumors. However, their therapeutic application in solid tumors is hindered by challenges, such as limited lifespan, tumor penetration, and delivery precision. Our research introduces a novel ultrasonic actuation technique to navigate NK cells more effectively in the vascular system, particularly at vessel bifurcations where targeted delivery is most problematic. We use a hemispherical ultrasonic transducer array that generates phase-modulated traveling waves, focusing on an ultrasound beam to steer NK cells using blood-flow dynamics and a focused acoustic field. This method enables the precise obstruction of non-target vessels and efficiently directs NK cells toward the tumor site. The simulation results offer insights into the behavior of NK cells under various conditions of cell size, radiation pressure, and fluid velocity, which inform the optimization of their trajectories and increase targeting efficiency. The experimental results demonstrate the feasibility of this ultrasonic approach for enhancing NK cell targeting, suggesting a potential leap forward in solid tumor immunotherapy. This study represents a significant step in NK cell therapeutic strategies, offering a viable solution to the existing limitations and promising enhancement of the efficacy of cancer treatments.

액체 로켓엔진 연소 안정성 평가를 위한 압력 교란 장치 특성 연구 (Dynamic Pressure Characteristics of Pulse Gun Device for Combustion Stability Rating of Liquid Rocket Engines)

  • 서성현;고영성;이광진;박성진;이수용
    • 한국항공우주학회지
    • /
    • 제31권7호
    • /
    • pp.94-99
    • /
    • 2003
  • 액체로켓엔진의 연소 안정성 평가를 위한 압력 교란 장치인 펄스건은 내재된 화약 폭발시 충격파를 유도관을 통해 엔진 연소기 내부로 전달 발생시키게 된다. 본 연구에서는 펄스건 특성에 영향을 주는 여러 가지 인자 중 화약 충진량에 의한 충격파 특성 파악을 위해 KSR-III 주 엔진과 같은 직경 크기를 갖는 모사 챕버를 이용하였다. 펄스건 출구에서 발생하는 충격파는 축대칭의 균일한 형상의 세기를 지니고 있으며 전체적인 세기 분포는 챔버 내의 압력에 따라 변화함을 확인하였다. 펄스건의 충격파는 상온 상태 조건에서 챔버내의 공명 주파수를 가진하는 것으로 보아 실제 연소장에서도 충분한 압력 교란을 제공할 수 있을 것으로 보인다. 가장 중요한 점은 펄스건에 의해 발생하는 초기 압력 최대 값이 화약 충진량의 크기에 비례하는 경향을 보인다는 것이다.

원통형 음향 홀로그라피를 이용한 성덕대왕 신종의 방사음장 특성 분석 (An analysis of the Sound Radiation Characteristics of the King Song-Dok Bell Using Cylindrical Acoustic Holography)

  • 김양한;김시문
    • 한국음향학회지
    • /
    • 제16권4호
    • /
    • pp.94-100
    • /
    • 1997
  • 성덕대왕 신종의 방사 음장 특성을 분석하기 위하여 30개의 마이크로폰으로 구성된 어레이를 이용하여 360개의 위치에서 음압을 측정한 후 원통형 음향 홀로그라피 방법을 적용하여 시간, 주파수별로 음장 해석을 행하였다. 타종 직후, 신종에서 방사되는 음장은 넓은 주파수 영역(800Hz까지 해석)에 걸쳐 고른 분포를 가지나 시간이 지남에 따라 고주파 성분은 급격히 감쇠하여 약 10초 이후에는 저주파 성분만이 존재한다. 마찬가지로 시간에 따른 음압 신호를 살펴보면 초기에 여러 성분의 모우드들이 중첩되어 복잡한 모양을 하고 있으나 10초 이후에는 한쌍의 저주파 성분(64.06Hz, 64.38Hz)에 의한 맥놀이 현상이 나타남을 확인할 수 있다. 이 맥놀이에 의한 여음이 초기의 화려하면서 장엄한 소리와 어우러져 신종만의 독특한 소리를 나타낸다. 맥놀이 현상은 종의 축에 대한 비대칭 현상에 의해 근접한 고유진동수를 가지기 때문에 발생하며 다른 고주파 성분에서도 쌍으로 존재하는 고유진동수를 관찰할 수 있다. 저주파 모우드의 경우 쌍으로 존재하는 방사 음장 형태는 길이 방향 절선 간격의 반에 해당되는 각도만큼 회전되어 나타난 것을 제외하고는 동일함을 알 수 있으며 고주파 모우드의 경우는 이보다 복잡한 모양을 이루고 있다.

  • PDF

복수 압전 가진기의 최적 설계를 통한 판구조물의 소음제어 (Noise Control of Plate Structures with Optimal Design of Multiple Piezoelectric Actuators)

  • 김재환
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
    • /
    • pp.263-270
    • /
    • 1996
  • 본 연구에서는 여러개의 원판형 압전소자가 부착된 판구조물의 소음제어를 다루었다. 판재의 아래에는 소음원이 위치하고 이 소음원은 판재를 가진한다. 구조물 및 압전소자는 3차원 요소, 구조물 요소 및 천이요소의 조화로 이루어지는 유한요소로 모델링 되었다. 최적화 과정의 목적함수는 구조물로부터 복사되는 소음 에너지이고 설계변수는 원판형 압전소자의 위치, 크기 및 인가되는 전압이 사용되었다. 최적설계과정에서 요구되는 자동격자형성이 언급되었다. 구조물의 공진 및 비공진 주파수에서 최적설계가 행해졌으며 괄목할 만한 소음감소를 얻었다. 이 결고는 음향 하중의 형태가 다르게 변하더라도 크게 변하지 않는 것이 밝혀졌다. 또한 한 주파수 뿐 아니라 넓은 주파수 영역에서도 압전가진기의 전압을 조정함으로써 좋은감소를 얻을 수 있다.

  • PDF

에어컨 실내기의 공력소음 예측을 위한 RANS 난류모델의 성능 평가 (PERFORMANCE ASSESSMENT OF THE RANS TURBULENCE MODELS IN PREDICTION OF AERODYNAMIC NOISE FOR AIR-CONDITIONER INDOOR UNIT)

  • 민윤홍;강성원;허남건;이창훈;박정택
    • 한국전산유체공학회지
    • /
    • 제17권4호
    • /
    • pp.81-86
    • /
    • 2012
  • The objective of the present study is to investigate the effects of various turbulence models on the aerodynamic noise of an air-conditioner (AC) indoor unit. The results from URANS (unsteady Reynolds-averaged Navier-Stokes) simulations with the standard k-$\varepsilon$, k-$\omega$ shear stress transport (SST) and Spalart-Allmaras (S-A) turbulence models were analyzed and compared with the noise data from the experiments. The frequency spectra of the far-field acoustic pressure were computed using the Farrasat equation derived from the Ffowcs Williams-Hawkings (FW-H) equation based on the acoustic analogy model. Two fixed fan casings and the rotating cross-flow fan were used as the source surfaces of the dipole noise in the Farrasat equation. The result with the standard k-$\epsilon$ model showed a much better agreement with the experimental data compared to the k-w SST and S-A models. The differences in the pressure spectra from the different turbulence models were discussed based on the instantaneous vorticity fields. It was found that the over-estimated power spectra with the k-w SST and S-A models are related to the emphasized small-scale vortices produced with these models.