• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1849-1854
• /
• 2018

The present study aims to investigate the feasibility of using a simple nonlinear acoustic method for the assessment of bone status and osteoporosis in trabecular bone. Correlations of linear and nonlinear ultrasound parameters with the apparent bone density were obtained in 32 bovine femoral trabecular bone samples. Highly significant positive correlations were observed between the apparent bone density and the two linear ultrasound parameters, the speed of sound (SOS) and the normalized broadband ultrasound attenuation (nBUA), with Spearman's correlation coefficients of r = 0.85 and 0.77. In contrast, the apparent bone density was found to be negatively correlated with the nonlinear ultrasound parameter introduced in the present study, the logarithmic difference between the power spectrum levels of the fundamental frequency and the second harmonic (PSL1-PSL2), with the highest correlation coefficient of r = -0.92. These results suggest that the PSL1-PSL2, in addition to the SOS and the nBUA, may be useful for the assessment of bone status and osteoporosis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.14-19
• /
• 2013

Nonlinearity parameter is an inherent property of materials measuring fundamental acoustic amplitude($A_1$) and second harmonic amplitude($A_2$). However, measurement of $A_1$ and $A_2$ has complex calibration procedure, many researchers prefer to measure relative nonlinearity parameter rather than absolute nonlinearity parameter. But, relative nonlinearity parameter is only detect materials degradation with various degradation samples, it is limited application in determining third order elastic constants of materials. Therefore, in this study, the piezoelectric detection method is adopted to measure absolute nonlinearity parameter due to experimental simplicity compare to capacitive detector. Linearity of measurement system is verified by $A_1^2vsA_2$ plot, and we measured ultrasonic nonlinearity parameters of fused silica and Al2024-T4.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.91-100
• /
• 1998

본 논문에서는 지수함수적 감쇄신호의 매개변수를 효율적으로 추정하기 위한 신호 모델링 기법을 제안한다. 이 방법은 맥놀이 주파수 성분을 갖으면서 과도기 형태 신호인 성 덕대왕 신종의 음파(공중음파 및 지중음파)를 분석하기 위하여 개발되었으며 선형예측모델 을 기본으로 하고 있다. 제안된 방법은 일반적인 데이터 행렬 대신에 자기상관 유사행렬을 사용하였으며 SVD 방법을 이용하여 매개변수를 추정한다. 성덕대왕 신종의 스펙트럼 및 감 쇄계수 특성을 분석하기 위하여 제안된 방법을 수집한 데이터에 적용하였고 분석결과를 토 대로하여 고유주파수 신호의 감쇄계수 및 움통의 역할도 규명하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.80.2-80
• /
• 2002

The problem of sound source localization is to determine the position of sound sources using the measurement of the acoustic signals received by microphones. To develop a good sound source localization system which is applicable to a mobile platform such as robots, a time delay estimator with low computational complexity and robustness to background noise or reverberations is necessary. In this paper, an explicit adaptive time delay estimation method for a sound source localization system is proposed. Proposed explicit adaptive time estimation algorithm employs direct adaptation of the delay parameter using a transform-based optimization technique, rather than...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.130-134
• /
• 1996

The characteristics of AE(Acoustic Emission) signal is related to cutting conditio, tool material, and tool geometry in metal cutting. The relation between AE signal and tool life was investigated experimentally. Experiment is carried out by gear shaping and SCM 420 workpiece. AE RMS voltage were increased according totool wear. It is suggested that maximum value of AE RMS voltage is an effective parameter to monitor tool life.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.186-189
• /
• 1997

To monitor abnormal state of rotary compressor, methods for acquisition and processing of Acoustic Emission(AE) signal are arranged and optimal AE parameter for monitoring is determined. The detecting method of abnormal compressor in real time is suggested and special-purpose minitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor in low cost.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.654-655
• /
• 2012

• Proceedings of the KSLP Conference
• /
• 1996.11a
• /
• pp.78-78
• /
• 1996

기식성 애성을 객관적으로 평가할 수 있는 음향지표는 아직 많은 연구가 되어 있지 않고 단지 청각심리검사에 의존하고 있는 실정이다. 본 저자들은 컴퓨터음향분석의 한 지표로서 기식성 애성에 대한 객관적인 음향지표로 이용될 수 있는 Multi-Dimensional Voice Program(mode1 4305, Kay Elemtrics Corp, USA)의 VTI(voice turbulance index)를 정상인과 성대병변 환자에서 비교 분석함으로써 기식성 애성의 객관적인 음향지표로서의 유용성을 확인하고자 하였다. (중략)

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.119-124
• /
• 2002

This paper considers the sound radiation characteristics of a craked rectangular vibrating plate, varying the orientation angle of a line crack. The vibration response of the cracked vibrating plate is obtained by using ANSYS, the acoustic theory based on the lumped parameter model is used to calculate radiated sound power. The radiated sound powers are computed with varying the orientation angle of the crack: i.e, 0$^{\circ}$, 45$^{\circ}$, and 90$^{\circ}$. It is found that characteristics of the radiated sound power are very closely related to the crack orientation, vibration mode and crack location.