• Korean Journal of Materials Research
• /
• v.24 no.3
• /
• pp.140-144
• /
• 2014

The contact mechanism of devices is usually researched at electrode contacts. However, the contact between a dielectric and channel at the MOS structure is more important. The graphene was used as a channel material, and the thin film transistor with MOS structure was prepared to observe the contact mechanism. The graphene was obtained on Cu foil by the thermal decomposition method with $H_2$ and $CH_4$ mixed gases at an ambient annealing temperature of $1000^{\circ}C$ during the deposition for 30 min, and was then transferred onto a $SiO_2/Si$ substrate. The graphene was doped in a nitrogen acidic solution. The chemical properties of graphene were investigated to research the effect of nitric atoms doping. The sheet resistance of graphene decreased after nitrogen acidic doping, and the sheet resistance decreased with an increase in the doping times because of the increment of negative charge carriers. The nitric-atom-doped graphene showed the Ohmic contact at the curve of the drain current and drain voltage, in spite of the Schottky contact of grapnene without doping.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.34-35
• /
• 2008

We investigated the effects of Pt nano electrodeposits on the corrosion of carbon substrate in an acidic solution. The electrodes for experiments were prepared by electrodepositing Pt on carbon substrate in a solution of 5 mM $H_2PtCl_6$ and 0.5 M $H_2SO_4$ using pulse deposition technique. In cyclic voltammograms for the carbon electrodes with and without Pt nano electrodeposits, total anodic current including both currents from oxygen evolution reaction and carbon corrosion increased abruptly above a critical potential. In addition, the critical potential of the carbon electrodes with Pt nano electrodeposits was lower than that of bare carbon electrode. This phenomenon was more prominent at $75^{\circ}C$ than $25^{\circ}C$. In potentiostatic experiments, the current transients and the corresponding power spectral density increased with increasing the applied potential for the electrodes. Furthermore, the current transients for the carbon electrodes with Pt nano electrodeposits were much higher than those for the bare carbon substrate. This indicates that the corrosion of carbon substrate can be highly accelerated by Pt nano electrodeposits.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.2
• /
• pp.193-201
• /
• 2001

Acidic air pollutants were collected to characterize indoor air quality in a residential area in the summer. All indoor and outdoor samples were measured simultaneously using an annular denuder system(ADS) in Seoul. The data set was collected from July 26 to September 11, 1997. The mean indoor/outdoor ratios measured from this study were : 0.34 for $HNO_3$; 0.91 for $HNO_2$; 0.22 for $SO_2$; 1.34 for $NH_3$; 0.78 for $PM_{2.5}(d_p$ <2.5 $mutextrm{m}$); 0.90 for $SO_{4}^{2-}$; 0.68 for $NO_{3}^{-}$ and 0.79 for $NH_{4}^{+}$. Indoor concentrations of $HNO_3$, $SO_2$ and $PM_{2.5}$ were highly correlated with the outdoor concentrations. The relationship between indoor and outdoor air is dependent, to a large extent, on the rate of air exchange between these two environments. A tracer-gas decay technique with sulfur hexafluoride ($SF_{6}$) as a tracer gas was used to estimate the air exchange of a private home in the summer. The average air exchange rate was estimated to be 23.7 hr(sup)-1. The deposition velocities for $SO_{4}^{2-}$, $NO_{3}^{-}$ and $NH_{4}^{+}$ calculated were 0.17, 0.69 abd 0.39 cm/sec, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1341-1345
• /
• 2006

An electrostatic interaction is responsible for the attachment of gold seeds of 1-3 nm onto APTMS (3-aminopropyl trimethoxysilane)-coated silica cores in the formation of gold clusters. A surface plasmon resonance and morphology of gold clusters were significantly affected by the pH of gold colloids prepared by THPC reducing agent. Gold colloids of alkaline pH induced the heterogeneous deposition of gold seeds onto the silica nanoparticles, probably due to the continuous reduction of residual gold ions during the attachment process. Gold colloids of acidic pH induced the monodisperse deposition of gold seeds, consequently leading to the formation of smooth gold layer on the silica nanoparticles surface. The gold nanoshells (core radius = 80 nm) prepared by gold colloids of pH 3.1 exhibited the more red-shift and relatively stronger intensity of plasmon absorption bands, compared with gold nanoshells prepared by alkaline gold colloids of pH 9.7.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.6
• /
• pp.537-544
• /
• 2001

In the present study, tin-zinc alloys were coated on a cold-rolled steel sheet with variations of electrolyte concentration, additives quantity and current density employing the Hull cell and circulation cell simulator. With an addition of additives of 2m1/L, tin-zinc deposits containing 10 to 40 percent Zn revealed a good surface appearance with weak acidic electrolytes. The organic additives suppressed the Sn deposition rate and thus increased the zinc contents in tin-zinc coating layers. The zinc contents in the tin-zinc coating layers depended almost linearly on the concentrations of metal ions of tin and zinc. Temperature of the electrolyte affected the composition tin-zinc coating layer. However, the concentration of complexants revealed little effectiveness. The surface morphology of tin-zinc coating showed dense tin and zinc phases with fine equiaxed grains with the high current density.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.43-46
• /
• 2004

Multi-walled carbon nanotubes (MWNTs) produced by chemical vapor deposition were treated with acidic solution for purification and oxidization of CNTs. The surface modification of the oxidized CNTs was achieved by amine treatment and oxygen plasma treatment. The functionalized CNTs were embedded in the epoxy resin by sonication method and the resulting composite was investigated by FESEM. Rheological and mechanical properties of nanocomposites were measured by AR2000 and Instron. The rheological properties and dispersion of modified CNTs/epoxy composites were improved as CNTs were modified, because the modification of CNTs led to a improvement interaction between the CNTs and the epoxy resin. In addition to this, mechanical properties are also improved because of the effective stress transfer between the CNTs and the polymer.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.113-114
• /
• 2002

대기중으로의 오염물질 배출량의 증가는 대기오염문제 뿐만 아니라 산성우 현상을 초래하게 된다. 산성우 현상은 발생과정에서부터 피해현상에 이르기까지 그 대상이 매우 광범위하고 광역적으로 나타나는 현상이기 때문에 산성우에 대한 문제는 범지구적인 환경문제로 다루어지고 있다. 우리나라에서는 아직 산성우로 인한 토양이나 수계 및 생태계 등에 대한 피해는 조사되지 않았으나 중국을 비롯한 주변국가들의 대기오염물질 배출량이 증가할 것이 예상되므로 장래 산성우에 의한 피해가 우려되며 향후 국가간의 환경분쟁에 대비하기 위해서도 산성우현상에 대한 조사연구가 필요하다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.197-198
• /
• 2001

대기 중 인위적 자연적 발생원에 기인하는 SO$_2$, NOx 및 HCs는 균일반응(homogeneous reaction)과 불균일반응(heterogenous reaction)을 통해서 산화되어 산성가스와 에어로졸을 형성한다. 대부분의 산성물질은 대기 중 구름, 안개, 에어로졸 액적중에서 균일반응을 통해 생성되며, 입자표면에서 가스상 물질의 불균일반응은 에어로졸농도가 높은 배출원 근처에서 국한된다. 이와 같은 반응을 통해 생성된 산성오염물질 및 전구물질은 건성 및 습성침적(dry and wet deposition)을 통해 지표면에 침강되어 생태계에 직ㆍ간접적인 영향을 줄 뿐만 아니라 산성우 및 동식물의 호흡기질환에 중요한 영향을 미친다.(Petros et al., 1989) (중략)

• Applied Science and Convergence Technology
• /
• v.24 no.2
• /
• pp.41-46
• /
• 2015

Transparent conductive oxides (TCOs) are essential material in optoelectronics such as solar cells, touch screens and light emitting diodes. Particularly TCOs are attractive material for infrared cut off film due to their high transparency in the visible wavelength range and high infrared reflectivity. Among the TCO, Indium tin oxide has been widely used because of the high electrical conductivity and transparency in the visible wavelength region. But ITO has several limitations; expensive and low environmental stability. On the other hands, fluorine doped tin oxide (FTO) is well known for low cost, weather ability and stable in acidic and hydrogen. In this study, two different magnetron sputtering techniques with RF and DC modes at room temperature deposition of FTO thin film was conducted. The change of oxygen content is influence on the topography, transmittance and refractive index.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2006

Coating the fibre surface by in situ oxidative chemical polymerisation of polypyrrole (using $FeCl_3$ as oxidant) is a readily industrial applicable way to give electrical properties to wool with good ageing stability [1], although pre-treatments are required to avoid damage of the cuticle surface due to the acidic condition of the process. FT-IR and EDX analysis reveal that organic sulphonates and sulphates, used as dopants, are absorbed by wool, while chlorine ions are preferably embedded on the polypyrrole layer. The resulting electrical conductivity seems mainly due to the presence of chlorine as counter-ion of polypyrrole; nevertheless, the presence of arylsulphonate in the polymerisation bath increases the electrical conductivity of the coating layer.