• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.5-37
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable to bring large fire accidents and burn out human life and their properties. To diminish the fire disaster, fire retardant plywood has been required indeed. In the methods of manufacturing the fire retardant plywood the soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions, redrying of soaked plywood is the most important. In this study, 3.5mm thin and 5.0mm thick plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid and minalith, and water solution. 1-, 3-, 6-, and 9 hour-soaking treatments were applied and after treatments hot plate drying was applied to those treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$, of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1. The plywoods treated with ammonium sulfate, monoammonium phosphate and diammonium phosphate and diammonium phosphate showed increase of chemical absorption rate with proportion to increase of treating time, but not in case of the plywood treated with borax-boric acid and minalith. 2. In the treatment of definite time, the absorption rate per unit of volume of plywood showed higher in thin plywood (thickness of 3.5mm) than in thick plywood (thickness of 5.0mm). In both thin and thick plywoods, the highest absorption rate was observed in 9 hour-treatment of ammonium sulfate. The value was 1.353kg/$(30cm)^3$ in thin plywood and 1.356kg/$(30cm)^3$ in thick plywood. 3. The volume per weight of plywood after chemical treatment increased remarkably and. after hot plate drying, the values were to a little extent higher than before chemical treatment. 4. The swelling rates of thickness in chemical-treated plywoods increased similarly with that of water-treated plywood in 1- and 3 hour-treatment of both thin and thick plywoods. But in 6- and 9 hour-treatment, the greater increased value showed in water-treated ply wood than any other chemical, especially in thick plywood. 5. The shrinkage rates after hot plate drying showed the same tendency as the swelling rate, and the rate showed the increasing tendency with proportion to increase of treating time in thick plywood of both chemical and water treatments. 6. Among drying curves, the curves of water-treated plywood placed more highly than chemical-treated plywood without-relation to thickness in 6- and 9 hour-treatment except in 1- and 3 hour-treatment. 7. The drying rate related to thickness of treated plywood, was twice above in thin plywood compared with thick plywood. 8. The drying rate remarkably increased with proportion to increase of the plate temperature and, the values were respectively 1.226%/min., 6.540%/min., 25.752%/min. in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thin plywood and 0.550%/min., 2.490%/min, 8.187%/min, in hot plate temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in thick plywood. 9. In the treatment at $120^{\circ}C$ of hot plate temperature, the drying rates of chemical-treated plywood showed the highest value in monoammonium phosphate of thin plywood and in diammonium phosphate of thick plywood. But the drying rate of water-treated plywood was highest in 6- and 9 hour-treatment. 10. The fire retardant degree of chemical-treated plywood was higher than that of the untreated plywood as shown in loss of weight, burning time, flame-exhausted time and carbonized area. 11. The fire-retardant effect among fire retardant chemicals were the greatest in diammonium phosphate, the next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric and minalith.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.201-207
• /
• 1974

Some effects of nitrogen, phosphorus, potassium and respiratory inhibitor on growth of rice plant and activity of GOT, GPT and peroxidase for the rice root were investigated. Obtained results were summarized as follows: 1. Growth of rice root and plant applied with $NO_3$-N in culture solution was generally increased in the length and weight compared with that of $NH_4$-N plot. On the other hand, the GOT, GPT and peroxidase activity was more increased in the $NH_4$-N plot than in the $NO_3$-N plot. 2. Oxidative power of ${\alpha}$-naphthylamine in rice root was stronger in the $NO_3$-N plot than in the $NH_4$-N plot. 3. When rice plant was cultured in the medium which did not supplied nitrogen, phosphorus or potassium, respectively, GOT activity was more decreased than GPT activity, while peroxidase activity was increased mostly in the potassium-free plot. 4. When rice plant was cultivated in the culture solution added respiratory inhibitor, NaF, plant height was shortened in the order of nitrogen-free > $NH_4$-H > urea-N > $NO_3$-N plot, and GOT and GPT activity was also decreased in the order of nitrogen-free > $NH_4$-N > urea-N > $NO_3$-N plot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1114-1119
• /
• 2012

This study was conducted to assess the microbial toxicity of ionic silver solution ($Ag^+N$) and silver nanoparticle suspension ($Ag^0NP$) based on the Microtox bioassay. In this test, the light inhibition of luminescent bacteria was measured after 15 and 30 min exposure to aqueous solutions and soils spiked with a dilution series of $Ag^+N$ and $Ag^0NP$. The resulting dose-response curves were used to derive effective concentration (EC25, $EC_{50}$, EC75) and effective dose ($ED_{25}$, $ED_{50}$, $ED_{75}$) that caused a 25, 50 and 75% inhibition of luminescence. In aqueous solutions, $EC_{50}$ value of $Ag^+N$ after 15 min exposure was determined to be < $2mg\;L^{-1}$ and remarkably lower than $EC_{50}$ value of $Ag^0NP$ with $251mg\;L^{-1}$. This revealed that $Ag^+N$ was more toxic to luminescent bacteria than $Ag^0NP$. In soil extracts, however, $ED_{50}$ value of $Ag^+N$ with 196 mg kg-1 was higher than $ED_{50}$ value of $Ag^0NP$ with $104mg\;kg^{-1}$, indicating less toxicity of $Ag^+N$ in soils. The reduced toxicity of $Ag^+N$ in soils can be attributed to a partial adsorption of ionic $Ag^+$ on soil colloids and humic acid as well as a partial formation of insoluble AgCl with NaCl of Microtox diluent. This resulted in lower concentration of active Ag in soil extracts obtained after 1 hour shaking with $Ag^+N$ than that spiked with $Ag^0NP$. With longer exposure time, EC and ED values of both $Ag^+N$ and $Ag^0NP$ decreased, so their toxicity increased. The toxic characteristics of silver nanomaterials were different depending on existing form of Ag ($Ag^+$, $Ag^0$), reaction medium (aqueous solution, soil), and exposure time.

• Applied Biological Chemistry
• /
• v.16 no.3
• /
• pp.146-165
• /
• 1973

Crop damages caused by sulfur dioxide poisoning were studied with respect to physiology of lesion, yield loss and prevention measures. The results are summarized as follows; 1. On the physiology of injury: The sulfur dioxide gas did no: affect the pH and $E_h$ values of the tested leaf juice of plants. Peroxidase activity was inhibited just after sulfur dioxide treatment but gradually recovered to normal after 10 hours. Methanolic chlorophyll solution was instantaneously and irreversibly bleached by the addition of sulfur dioxide gas with no evidence of pheophytin formation. It seems that chlorophyll forms colourless addition product or is reduced to colourless form with either sulfur dioxide gas or sulfurous acid. Chlorophyll in the chloroplast was also bleached by the sulfur dioxide treatment, as in the case of methanolic solution of chlorophyll, except that the rate of bleaching was rather slow, requiring 1-2 hours. It appears that the most inflicting cause of sulfur dioxide gas to plants may be the destruction of chlorophyll by the poisoning gas. 2. On the effects to crop yield: The crop yield losses were proportional to the concentration of inflicting sulfur dioxide gas. The order of tolerence of the crops to the sulfur dioxide gas was as follows - chinese cabbage being the most susceptible; wheat, paddy rice, barley, soybean, welsh onion, radish and chinese cabbage. The crucifer crops were generally found more susceptible than other crops studied. With respect to the growing stages of crops exposed to sulfur dioxide gas, it was found that the flowering stage was the most susceptible fellowed by panicle forming, milky and tillering in the decreasing order of susceptibility. 3. On the preventive measures of yield losses: Soil applications of potassium, wollastonite, lime or spray of lime water were effective to prevent yield losses from sulfur dioxide fumigation of paddy rice, barley, and soybeans. The most responsive treatment was lime water spray for all crops tested. In case of sulfur dioxide fumigated paddy rice, the lime water spray also increased carbon assimilation.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.423-429
• /
• 2008

Currently, Ash-free clean coal producing process by solvent extraction is under development. The produced ash-free clean coal can be directly combusted in a gas turbine which results in substantial improvement of power generation efficiency. However, the clean coal produced by the solvent extraction still contain trace amount of alkali metal which may cause corrosion on turbine blades during the direct combustion. In present work ${\alpha},{\beta}$-metal (Zr and Ti) phosphates and H-Y zeolite were synthesized and their ion exchange characterizations were investigated for the application on alkali metal removal for clean coal production. $Na^+$ ion removal capacities of the metal phosphates and H-Y zeolite were measured and compared in both aqueous solution (100 ppmw, $Na^+$) and coal dissolved N-methyl-2-pyrrolidone (NMP, 12 ppmw $Na^+$) at elevated temperature. In aqueous solution, the ${\beta}$ form metal phosphates showed very high ion exchange capacities compared to ${\alpha}$ form. ${\beta}$ form metal phosphates also showed higher $Na^+$ removal capacities than H-Y zeolite. In ion exchange medium of NMP, all the ${\alpha}$ form metal phosphates showed over 90% of $Na^+$ ion removal efficiency in the temperature range of 200 to 400 while that of H-Y zeolite decreased as a half when the temperature was over 350. In addition, the regenerated metal phosphates by acid treatment showed no sign of degradation in $Na^+$ removal efficiency. Among the metal phosphates used, $Zr_{0.75}Ti_{0.25}(HPO_4)_2$ showed the best performance in $Na^+$ removal and is expected to be the most suitable inorganic ion exchanger for the alkali metal removal process.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.484-492
• /
• 2014

We quantified the effects of the composition and concentration of fertilizer solutions on the growth and nutrient uptake of 'Maehyang' strawberry at the vegetative growth stage. Acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) with concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N, were formulated and applied during the 100 days after transplanting, at which point crop growth and tissue nutrient contents were analyzed. The soil solutions were sampled every two weeks to measure the pH, EC and nutrient concentrations. BF was a more effective fertilizer compared to AF and NF for growth of 'Maehyang' strawberry when fertilizer concentrations were controlled to $100mg{\cdot}L^{-1}$. By contrast, the fresh and dry weights were greatest in the NF treatment when fertilizer concentrations were controlled to $200mg{\cdot}L^{-1}$. The tissue contents of N, P, and Na were 2.20, 0.51 and 0.10%, respectively, in the NF 200 treatment, and these were the highest among all treatments tested. The highest contents of K, Ca and Mg were 2.60% in AF 200, 0.95% in BF 200 and 0.45% in BF 100, respectively. During the fertilization period, the highest and lowest pHs were 6.13 in BF 100 and 4.92 in AF 200. The lowest EC was $1.376dS{\cdot}m^{-1}$ in BF 100 and the highest was $4.936dS{\cdot}m^{-1}$ in NF 200 treatments. The highest $NH_4{^+}$ concentrations in the soil solution occurred during the AF 200 treatment, followed by those with NF 200 and AF 100. When fertilizer concentrations were equal, AF treatment gave rise to the highest $Ca^{+2}$ and $Mg^{+2}$ concentrations, followed by NF and BF, until day 84 of fertilization. The BF treatments had the highest $NO_3{^-}$ concentrations followed by NF and AF. The trends for $PO_4^{-3}$ concentrations were similar in all fertilizer treatments when the fertilizer concentrations were equal. The above results indicate that neutral and basic fertilizers were most effective to promote 'Maehyang' strawberry growth when fertilizer solutions were controlled to low or high concentrations, respectively. These findings are useful for planning fertilization programs for vegetative propagation of 'Maehyang' strawberry.

• Korean Journal of Environmental Biology
• /
• v.29 no.2
• /
• pp.92-97
• /
• 2011

Morphological and physiological differences of $Colocasia$ $esculenta$ were investigated in the cultivation of hydorphonic and soil culture. $C.$ $esculenta$ grown in Hoa.+IAA (indole-acetic acid) showed higher growth activity representing 9%, 32%, 38% and 60% than those of the cultivation of vermiculate, Hoagland solution, soil and water, respectively. In case of $F_v/F_m$ ratio experiments, the value $F_v/F_m$ of $C.$ $esculenta$ cultivated in the water showed 0.55 after 6 weeks. $F_v/F_m$ values of $C.$ $esculenta$ cultivated in Hoagland+IAA, vermiculate and soil were between 0.84 and 0.80 indicating $F_v/F_m$ values were about 45% higher than that of $C.$ $esculenta$ cultivated in the water. Diffusion resistance was 45~35% lower in $C.$ $esculenta$ grown in Hoa.+IAA solution than that of $C.$ $esculenta$ grown in water only after 5 and 6 weeks. Therefore, the high standing levels of the growth rate, fluorescence activity and transpiration rate were Hoa.+IAA, vermiculate, Hoagland, soil and water. The distinct morphological differences of $C.$ $esculenta$ cultivated in hydorphonic and soil culture were the appearance of the seed corm and root hair. The development of seed corm was well established in soil culture but the corm in hydorphonic was slowly hydrolyzed and then disappeared. The fibrous root systems of hydorphonic were very well distinguishable compared with that in soil culture. Outstanding results of this experiment were appeared in $C.$ $esculenta$ which was cultivated in the field provided with enough mineral nutrition, organic fertilizers and compound fertilizers. The most height taros were almost 2m and the numbers of seed corm were 30~40 after 7 months.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.52-59
• /
• 1986

As one of trials to process instant sardine foods which can be preserved at room temperature, three kinds of products were prepared as seasoned-dried product (control, C), liquid smoked seasoned-dried product(S) and antioxidant treated seasoned-dried product(E), and their processing conditions and quality stability during storage were examined. Raw sardines were dressed, steamed and then filleted. The sardine fillets were seasoned with the mixed seasoning solution containing $28.0\%$ of sorbitol, $14.0%$ of sugar, $5.6\%$ of table salt, $1.8\%$ of monosodium glutamate, $0.6\%$ of garlic powder and $50.0\%$ of water at $5^{\circ}C$ for 15 hours, and dipped for 45 seconds in $10\%$ Smoke-EZ solution. After liquid smoking, the seasoned and liquid smoked sardine fillets were dried at $45^{\circ}C$ for 4 hours, vacuum packed in laminated plastic film bag(polyester/casted polypropylene= $12{\mu}m/70{\mu}m,\;15{\times}16cm$), and finally pasteurized in water at $95^{\circ}C$ for 30 minutes. The results obtained from chemical and microbial experiments during storage are as follows : the moisture contents, water activity and pH of the products showed little change, and VBN of them slightly increased during storage. The TBA value and POV of the products (E, S) were lower than those of control product(C) considerably. In color values, L value (linghtness) decreased while a and b value (red and yellow) revealed a tendency to increase during storage. The fatty acid composition of the products were similar to those of raw sardine, the predominant fatty acids were 16:0, 20:5, 18:1 and 22:6. The products (E, S) have a good preservative effect on highly unsturated fatty acids during storage. Viable cell counts of those products were negative and histamine contents were less than 2.0 mg/100 g. Among the texture profiles, hardness, elasticity and cohesiveness of the products slightly decreased during storage. Judging from the sensory evaluations, liquid smoked seasoned-dried product(S) was the most desirable, and the products could be preserved in good condition for 40 days at $25{\pm}3^{\circ}C$.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.15-21
• /
• 2004

Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2003

A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.