• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.331-335
• /
• 2004

This study was carried out to improve quality of minimally processed lettuce with various treatments. The treatments for preventing enzymatic browning were using different chemical immersion solutions and controlling microbial growth were using chlorine, electrolyzed water, and organic acid. The solution with ascorbic acid 1$\%$ and citric acid 1 $\%$ showed a positive effect on antibrowning of minimally processed lettuce. In the inhibition of microorganisms growth, 200 ppm NaCIO solution was more effective than fermented pollen solution and Na-dichloroisocyanurate solution. In electrolyzed water system, no-diaphragm system showed inhibitory effect of microorganisms growth. Also, total microorganisms count of minimally processed lettuce with ascorbic acid and citric acid solution was lower by about 4 log cycle after 4 days storage at l0$^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.147-158
• /
• 1998

The purpose of this study was to test the stability of TPN basic solutions containing amino acids and dextrose. Test solutions containing $4.25\%$ amino acids in $25\%$ dextrose (central TPN basic solution) or $4.25\%$ amino acids in $10\%$ dextrose (peripheral TPN basic solution) were prepared. Two different amino acids solutions $(Fravasol^{(R)}\;vs\;Freamine^{(R)})$ were tested. The samples were taken from each admixture and stored in the evacuated, sterile containers at $2{\sim}8^{\circ}C$ and ambient room temperature. Each sample was analyzed at 0, 3, 7, 14 and 30 days of storage. Each amino acid was analyzed by amino acid analyzer. Dextrose content was measured by polarimeter. The pH and chromagen formation were also monitored. The decomposition was measured by the changes in concentration of amino acids and dextroser TPN basic $solution-Freamine^{(R)}$ admixture stored at $2\sim8^{\circ}C$ were stable for 30 days. Central and peripheral TPN basic solutions stored at room temperature were stable for 7 days and 14 days, respectively. There were no changes in color for 30 days by naked eye. Amino acid concentrations in TPN basic $solution-Fravasol^{(R)}$ admixture stored at $2\sim8^{\circ}C$ or room temperature were stable for 30 days. But, significant color change was detected according to passing time. In conclusion, Peripheral TPN basic $solution-Fravasol^{(R)}$ admixture stored at room temperature and in refrigerator were stable for 3 days and 7 days, respectively. However, central TPN basic solution-Fravasol admixtures were unstable. Therefore, it is recommended that it should be admixed right before use.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.178-190
• /
• 2012

Flat sheet membranes were prepared with polysulfone (PSF) by an immersion precipitation phase inversion method. Membranes were prepared with PSF/N-methylpyrrolidone (NMP)/polyvinylpyrrolidone (PVP)/phosphoric acid casting solution and water coagulant. By using the successive process of the vapor-induced phase inversion (VIPS) followed by the nonsolvent-induced phase inversion (NIPS), the effect of phosphoric acid addition to casting solution on morphology and permeability of membrane was studied. The mean pore size, the porosity, and the water flux of membranes were increased by the addition of small amount of phosphoric acid. Furthermore, the morphology of the prepared membranes were changed from a dense sponge-like structure to highly enhanced asymmetric structure. PSF/NMP/PVP/phosphoric acid/2-butoxyethanol (BE) casting solution were prepared and cast the successive VIPS-NIPS process with same experimental condition. Due to the addition of BE to casting solution, the mean pore size and almost 0.1 ${\mu}m$ and the water flux increased about 10 to 12 $L/cm^2{\cdot}min{\cdot}bar$.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.185-189
• /
• 1965

Korean acid clays and silica gel were put into action on benzene solution of dye, such as aniline yellow, o-nitro aniline and oil orange, and then the adsorptivity of dye in nonaqueous solution was measured, with the result that adsorptivity was greater with silica than acid clays and it had no relation to acidity. And when chemical compounds, such as amine, alcohol, halogen derivative, were added to each dye solution by 10%(in volume), the change of the adsorptivity of dye by solid acid(that is, the interfered adsorption rate) decreased in order of amine > alcohol > halogen derivative, and in homologue the smaller the molecular weight, the larger was the effect. So adsorption in nonaqueous solution was a selective adsorption of chemical compounds which contained negative groups such as amine and hydroxyl radicals, and it had no relation to surface tension and showed inverted phenomenon of Traube series. It is guessed that the inverted phenomenon (the interfered adsorption phenomenon) was due to the polar chemical adsorption between active $SiO_2$ which was an origin of solid acid and the adsorbed substances, considering that the order of inversion was nearly in accord with dipole moment of added solvents. The results of this study led to find adsorption mechanism and inverted phenomenon of Traube series in nonaqueous solution.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.163-167
• /
• 2006

The transition of europium-doped gadolinium oxide phosphor to gadolinium borate phosphor with the concentration of boron in the spray pyrolysis was investigated. The particles prepared from spray solution below 10 wt% boric acid of prepared phosphor had crystal structure of $Gd_2O_3:Eu$ phosphor, in which the crystallinity of the particles decreased with increasing the boron concentration. A single phase $GdBO_3:Eu$ phosphor particles were prepared from spray solution above 50 wt% boric acid of prepared phosphor. The phosphor particles prepared from spray solution with 20 wt% boric acid of prepared phosphor had no XRD peaks of $Gd_2O_3:Eu$ and $GdBO_3:Eu$ Therefore the phosphor particles prepared from spray solution with 20 wt% boric acid of prepared phosphor had the lowest photoluminescence intensity under ultraviolet and vacuum ultraviolet. $GdBO_3:Eu$ and $Gd_2O_3:Eu$ phosphor particles prepared from spray solutions with proper concentrations of boric acid had good photoluminescence intensity under vacuum ultraviolet. The morphology of the phosphor particles were strongly affected by the concentrations of boric acid added into spray solution.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.333-341
• /
• 2000

Blends consisting of linear shape polylactic acid and star shape polylactic acid (L-PLLA/S-PLLA) have been prepared by melt and solution blending. The effect of blending method on the thermal properties and crystallization behavior of L-PLLA/S-PLLA blends has been investigated. The molecular weight decrease was revealed both in melt and solution blending. S-PLLA was found to be more stable than L-PLLA in the reduction of molecular weight during the course of blending due to its star shape structure. As a result, broad molecular weight distribution was obtained in solution blending. It was found that melting temperature and glass transition temperature decrease with increasing S-PLLA content. Blending method had large influence on the glass transition temperature of PLLA blends, while less effect on melting temperature. From DSC results, it can be noticed that solution blending is more effective blending method to obtain higher crystallinity than melt blending for S-PLLA and blend with higher S-PLLA content.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.15-21
• /
• 1996

Purification of hyaluronic acid produced by Streptococcus equi was carried out to obtain clinical grade hyaluronic acid. The removal method of the bacteria was selected as filtration because filtration was the most effective method in removing impurities such as protein and nucleic acid of the fermentation broth. The removal efficiencies of protein and nucleic acid of hyaluronic acid solution were increased to 75% and 67%, respectively, by filtration with adding 0.6% of activatied carbon and 1.0% colite. Hyaluronic acid solution was precipitated by mixing with 2 volumes of ethanol. Effects of pH and conductivity on ethanol preciptation of hyaluronic acid were investigated. Protein and nucleic acid of hyaluronic acid were remained almost constant regardless of pH and conductivity, and the recovery of hyaluronic acid was optimum as about 85% at pH 7 and l00mS of conductivity Protein of hyaluronic acid was completly removed by three serial filtration and ethanol precipitation, however, nucleic acid was not removed. Hyaluronic acid solution was passed through a column of Duolite A7 to remove its nucleic acid, where 65% of nucleic acid was removed at pH 7 and 40mS of conductivity. The residual nucleic acid of hyaluronic acid solution was completly removed by treatment of 0.2% hydroxyapatite and the clinical grade hylauronic acid could be obtained.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.2
• /
• pp.95-104
• /
• 2002

This study was carried out to investigate the effects of pyroligneous acid on turfgrass growth and to propose usage for sustainable management on Korean golf course green. Each plot was treated with 0, 300, 500, and 800 acid to water solution. On all the plots, turfgrass growth increment and visual quality were measured at fried times. The data were subjected to paired samples t-test and corelation analysis. The summarized results are as follows; 1) Leaf growth increment, density, and root spread depth of turfgrass treated with 1: 500 and 1: 800 diluted pyroligneous acid were significantly superior to the control. Particularly, 1: 500 diluted solution was superior to the others. 2) Color, texture, and uniformity of turfgrass treated with 1: 500 and 1: 800 diluted pyroligneous acid were significantly superior to the control. Especially, 1: 500 diluted solution tended to be superior to the others. 3) There were no symptoms of disease in all plots treated with the diluted pyroligneous acid. 1 500 and 1: 800 diluted pyroligneous acid were not thought to trigger or promote disease. 4) Before and after investigating the effect of pyroligneous acid on turfgrass growth ,the soils were analyzed. In all treatments, the chemical properties of the soils did not change noticeably. The chemical properties of the soils might be not changed by the diluted pyroligneous acid treatments. 5) Considering the results mentioned above, 1: 500 diluted pyroligneous acid was the most effective. Though pyroligneous acid is an organic fertilizer and contains only a little nitrogen and phosphorus, 1: 500 diluted pyroligneous acid promoted turfgrass growth effectively. Thus this use might lead to a reduction in the amount of fertilizers used and result in ecologically responsive management of Korean golf courses.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.5
• /
• pp.259-266
• /
• 1995

In order to manufacture an attractive waste glass for the permanent and secure disposal of high-level radioactive waste, the complex composition of the simulated nuclear waste glass PNL-7668 was simplified to a composition of sodium borosilicate glass. The substitutions of $Fe_2O_3$ and $Al_2O_3$ were added to examine on the leaching characteristics of simulated nuclear waste glass with variable composition. The leach tests for these glasses were performed according to 'MCC-1, Static Leach Test Procedure' in acid and basic solution. In this study, for the $Al_2O_3$-containing glasses, Na ion release from these glasses was higher in acid solution than in basic solution. As the content of $Fe_2O_3$ was increased in glasses, Na ion release was increased in acid solution, in spite of decrease of amount of total mass diminution.