Acknowledgement
Supported by : 동의대학교
References
- M. C. Porter, "Handbook of industrial membrane technology", pp. 61-62, Noyes Publications, Park Ridge, New Jersey (1990).
- D. H. Lee, L. H. Kim, and K. Y. Chung, "Wastewater recycling from electroless printed circuit board planting process using membranes", Membrane Journal, 13, 1/9 (2003).
- D. B. Mosqueda-Jimenez, R. M. Narbaitz, T. Matsuura, G. Chowdhury, G. Pleizier, and J. P. Santerre, "Influence of processing conditions on the properties of ultrafiltration membranes", J. Membr. Sci., 231, 209 (2004). https://doi.org/10.1016/j.memsci.2003.11.026
- M. Mulder, "Basic Principles of Membrane Technology", pp. 71-89, Kluwer Academic Publishers, London (1996).
- P. van de Witte, P. J. Dijkstra, J. W. A. van den Berg, and J. Feijen, "Phase separation processes in polymer solutions in relation to membrane formation", J. Membr. Sci., 117, 1 (1996). https://doi.org/10.1016/0376-7388(96)00088-9
- R. M. Boom, I. M. Wienk, Th. Van den Boomgaard, and C.A. Smolders, "Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive", J. Membr. Sci., 73, 277 (1992). https://doi.org/10.1016/0376-7388(92)80135-7
- I. M. Wienk, R. M. Boom, M. A. M. Beerlage, A. M. W. Bulte, and C. A. Smolders, "Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers", J. Membr. Sci., 113, 361 (1996). https://doi.org/10.1016/0376-7388(95)00256-1
- D. B. Mosqueda-Jimenez, R. M. Narbaitz, T. Matsuura, G. Chowdhury, G. Pleizier, and J. P. Santerre, "Influence of processing conditions on the properties of ultrafiltration membranes", J. Membr. Sci., 231, 209 (2004). https://doi.org/10.1016/j.memsci.2003.11.026
- S.-J. Shin, J.-P. Kim, H.-J. Kim, J.-H. Jeon, and B.-R. Min, "Preparation and characterization of polyethersulfone microfiltration membranes by a 2-methoxyethanol additive", Desalination, 186, 1 (2005). https://doi.org/10.1016/j.desal.2005.03.092
- C. Stropnik and V. Kaiser, "Polymeric membranes preparation by wet phase separation: mechanisms and elementary processes", Desalination, 145, 1 (2002). https://doi.org/10.1016/S0011-9164(02)00322-3
- R. M. Boom, T. van den Boomgard, and C. A. Smolders, "Mass transfer and thermodynamics during immersion precipitation for a two-polymer system: evaluation with the system PES-PVP-NMPwater", J. Membr. Sci., 90, 231 (1994). https://doi.org/10.1016/0376-7388(94)80074-X
- D. Rana, T. Matsuura, R. M. Narbaitz, and C. Feng, "Development and characterization of novel hydrophilic surface modifying macromolecule for polymeric membranes", J. Membr. Sci., 249, 103 (2005). https://doi.org/10.1016/j.memsci.2004.09.034
- V. P. Khare, A. R. Greenberg, and W. B. Krantz, "Vapor-induced phase separation-effect of the humid air exposure step on membrane morphology: Part I. Insights from mathematical modeling", J. Membr. Sci., 258, 140 (2005). https://doi.org/10.1016/j.memsci.2005.03.015
- M.-J. Han, "Effect of propionic acid in the casting solution on the characteristics of phase inversion polysulfone membranes", Desalination, 121, 31 (1999). https://doi.org/10.1016/S0011-9164(99)00005-3
- D. M. Koenhen and C. A. Smolders, "The determination of solubility parameters of solvents and polymers by means of correlations with other physical quantities", J. Appl. Polym. Sci., 19, 1163 (1975). https://doi.org/10.1002/app.1975.070190423
- http://www.sigmaaldrich.com/content/dam/sigma-aldrich/ docs/Aldrich/General_Information/polymer_solutions.pdf, June 4 (2012).
- S.-R. Choi, S.-J. Park, B.-K. Seo, K. W. Lee, S. T. Nam, and M.-J. Han, "Effect of propionic acid additive on preparation of phase inversion polysulfone membrane", Membrane Journal, 18, 4, 261 (2008).
- B. G. Park, S.-H. Kong, and S. Y. Nam, "Phase behavior and morphological studies of polysulfone membranes ; the effect of alcohols used as a nonsolvent coagulant", Membrane Journal, 12, 4, 255 (2005).
- N. Kim, "Preparation and characteristics of polyethersulfone microfiltration membranes", Membrane Journal, 17, 329 (2007)
- W. Wilson, K. Gupta, A. Jena, R. Webber, M. Connoly, E. Mayer, B. V. Ramarao, and C. Dryer, "Advanced technique for pore structure characterization theory & practices : PMI Short Course June 2004", PMI, New York (2004).
- Y. Son and N. Kim, "Effect of polymer structure on membrane morphology by addition of 2-butoxyethanol," Membrane Journal, 21, 307 (2011).