• The Plant Pathology Journal
• /
• 제23권3호
• /
• pp.203-209
• /
• 2007

Infection structures were observed using a fluorescence microscope at the penetration sites on the leaves of potato plants pre-inoculated with the bacterial strains Pseudomonas putida TRL2-3, Micrococcus luteus TRK2-2, and Flexibacteraceae bacterium MRL412, which mediated an induced systemic resistance on potato plants against late blight disease caused by Phytophthora infestans. In order to compare the infection structures on the leaves expressing systemic acquired resistance, the leaves of potato plants pre-treated with DL-3-amino butyric acid (BABA) were also observed after challenge inoculation with the same pathogen. The infection structures were investigated. The total number of germination and appressorium formation of P. infestans were counted. Furthermore, the frequencies of fluorescent epidermal cells at the penetration sites, which indicate a defense response of plant cell, were estimated. There were no differences on the germination rates of the fungal cysts among the untreated control, BABA pre-treated, and bacterial strains pre-inoculated plants. However, appressorium formation was slightly decreased on the leaves of BABA pre-treated plants compared to those of untreated as well as bacterial strains pre-inoculated plants. Furthermore, the frequencies of fluorescent cells of BABA pre-treated and bacterial strains pre-inoculated were higher than that of untreated plants, indicating an active defense reaction of the host cells against the fungal attack. On the other hand, the pre-treatment with BABA caused a stronger fluorescent of epidermal cells at the penetration sites compared to the pre-inoculation with the bacterial strains. Interestingly, the frequency of fluorescent cells by BABA, however, was lower than that by the bacterial strains. Based on the results it is suggested that the infection structures showing resistance reaction on the leaves of potato plants were different between by pre-inoculation with bacterial strains and by pre-treatment with BABA against the late blight pathogen.

• 한국잡초학회지
• /
• 제30권3호
• /
• pp.225-232
• /
• 2010

과산화계 제초제 oxyfluorfen이 처리된 비형질전환 벼와 형질전환 벼에서 Protox 발현 위치가 제초제 저항성에 미치는 영향을 비교하였다. Arabidopsis protoporphyrinogen oxidase(Protox; AP 계통)를 색소체에만 발현하는 형질전환 벼와 Myxococcus xanthus Protox 유전자를 색소체와 미토콘드리아에 모두 발현하는 형질전환 벼(TTS 계통)가 형질전환 시스템으로 사용되었다. Oxyfluorfen이 처리된 TTS4 계통은 AP 계통이나 비형질전환 벼에 비해 낮은 수준의 세포질 누출 및 malonyldialdehyde를 보여주었고, 높은 5-aminolevulinic acid 합성 능력을 유지하였다. Oxyfluorfen 작용 동안, TTS4 계통은 AP1 계통보다 높은 제초제 저항성을 보여주었는데, 이는 색소체만에서의 Arabidopsis Protox의 발현에 비해 색소체와 미토콘드리아에서의 M. xanthus Protox의 쌍발현이 광역학적인 protoporphyrin IX의 축적을 더 효율적으로 억제하였기 때문일 것이다. 이 결과들은 미토콘드리아 내 Protox의 발현이 Protox 저해형 제초제에 대한 식물의 저항성에 크게 기여함을 의미한다.

• 한국수산과학회지
• /
• 제38권6호
• /
• pp.365-371
• /
• 2005

The antimicrobial resistance patterns to the 10 antimicrobial agents of potential pathogenic vibrios isolated from seawater and a variety of farmed fishes, including oliver flounder (Payalichthys olivaceus), black rock fish (Sebastes schlegeli), red sea bream (Pagyus major) and sea bass (Lateolabyax japonicus), were investigated from May to October, 2004. A total of 314 strains of the genus vibrios were isolated from 126 collected samples, and the number of isolated strains of Vibrio payahaemolyticus and Vibrio alginolyticus were 194 and 120, respectively. Apparently $98.5\%$ of V. parahaemolyticus and $100\%$ of V. alginolyticus isolates demonstrated antimicrobial resistance against at least one antimicrobial agent. The resistance of V. parahaernolyticus isolates to ampicillin ($97.9\%$) was highest, followed by oxolinic acid ($26.8\%$), amikacin ($19.1\%$) and tetracycline and amoxicillin/clavulanic acid ($6.7\%$). V. alginolyticus isolates were resistant to ampicillin ($100\%$), solfamethoxazoleit,imethopenem ($25\%$), amikacln ($21.7\%$), amoxicillin/clavulanic acid ($15.8\%$), ciprofloxacin ($13.3\%$), and tetracycline and doxycycline ($11.7\%$). The rate of multiple antimicrobial resistance to at least four antimicrobials was higher in the V. alginolyticus isolates ($20.8\%$) than in the V. parahaemolyticus ($6.7\%$).

• 한국미생물·생명공학회지
• /
• 제22권3호
• /
• pp.240-245
• /
• 1994

Relation the phage defense mechanism of phage resistant Lactococcus lactis subsp. cremoris ATCC 11602-A1 to its cell wall components was investigated. To determine whether teichoic acid which is known to be one of the phage receptor site present on the cell wall, phage adsorption was examined after treatment 5% TCA(60%$\CIRC $C) and concanavalin A to the cell wall of A1 and parent strain. However, the adsorption rate of two strains did not change. Total amount of phosphate after TCA treatment did not change in both strains, but a difference between the two strains was observed. Ribitol and glycerol, components of teichoic acid, could not be detected in the cell walls of two strains by GC analysis. These results suggest that although teichoic acid was not present in the cell walls of both strains, the composition of cell wall of two strains was not identical. Measurement of amount of protein and SDS-polyacryamide gel electrophoresis were carried out to examine the involvement of cell wall protein in phage resistance, showing that protein is nothing to do with phage adsorption of parent strain, but phage resistance of A1 is related to protein. Cell wall carbohydrates of A1 contained rhamnose, glucose, and galactose. Total amount of carbohydrate of 1% SDS-treated A1 cell wall was reduced to the level of parent strain. The results suggest that phage resistance of A1 was due to the presence of a higher level of carbohydrates then parent strain, and to interaction of carbohydrate and protein.

• 운동영양학회지
• /
• 제23권3호
• /
• pp.45-49
• /
• 2019

[Purpose] Recent studies suggest that ursolic acid (UA) is a potential candidate for a resistance exercise mimetic that can increase muscle mass and alleviate the deleterious effect of skeletal muscle atrophy on bone health. However, these studies evaluated the effects of UA on skeletal muscle and bone tissues, and they have not verified whether such effect could occur concurrently on muscle and bone, as is the case with resistance exercise. Thus, the aim of this study was to analyze the effect of UA injection on muscle mass and bone microstructure using an animal model of atrophy to demonstrate the potential of UA as a resistance exercise mimetic. [Methods] The immobilization (IM) method was used on the left hindlimb of Sprague Dawley (SD) rats for 10 days to induce muscle atrophy, whereas the right hindlimb was used as an internal control (IC). The animal models were divided into two groups, SED (sedentary, n=6) and UA (n=6) to demonstrate the effect of UA on atrophic skeletal muscles. The UA group received a daily intraperitoneal injection of UA (5 mg/kg/day) for 8 weeks. After 10 days of IM, the data collected for the IC were compared with that of IM to determine whether muscle atrophy might occur. [Results] Muscle atrophy was induced and bone mineral density (BMD) decreased significantly. The 8-week UA treatment significantly increased the gastrocnemius muscle mass compared to the SED group. In regard to the effect of UA on bones, negative results such as a decrease in BMD, trabecular bone volume fraction, and trabecular number, and an increase in trabecular separation, were observed in the SED group, but no such difference was observed in the UA group. No significant difference was observed in atrophic hindlimbs between SED and UA groups. [Conclusion] These results alone are insufficient to suggest that UA is a potential resistance exercise mimetic for atrophic skeletal muscle and weakened bone. However, this study will help determine the potential of UA as a resistance exercise mimetic.

• 한국농공학회지
• /
• 제45권7호
• /
• pp.20-26
• /
• 2003

The ultra-lightweight high strength polymer concrete could be used for the drain structures under severe condition. In this study, materials used were unsaturated polyester resin, heavy calcium carbonate, artificial lightweight coarse aggregate and perlite. In the test results, the unit weight of the ultra-lightweight high strength polymer concrete was 946 kg f/$\textrm{m}^3$ and the compressive strength was appeared in 34.5 MPa. The compressive strength, splitting tensile strength, flexural strength, acid resistance and weather resistance were shown in excellently than that of the normal cement concrete. The draining trench had 1m length, 0.24 m width, 0.02 m thickness and 0.07 m height. The developed trench could be effectively used at the draining structures.

• 약학회지
• /
• 제33권2호
• /
• pp.73-79
• /
• 1989

One hundred and sixteen strains of E. coli isolated from drainage in Seoul city in 1987 and 104 strains of E. coli isolated from stools of domestic animals in suburb of Seoul in 1987 were examined for susceptibilities to 10 antimicrobial agents by the agar dilution method. The susceptibilities of the two groups to each antimicrobial agent were compared and correlations in the antimicrobial susceptibility of the 220 strains of E. coli among the 10 antimicrobial agents were also analyzed. The frequency of resistance strains was highest to tetracycline with 77%, and followed by chloramphenicol, streptomycin, ampicillin, kanamycin and cephalosporin in the descreasing order, tanging from 62% to 10%. Strains resistant to tobramycin, nalidixic acid, gentamicin and amikacin occupied 3 strains, 2 strains, 2 strains and 1 strain respectively.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.68-75
• /
• 2012

The biogenic corrosion of mortars adopted in sewage repair by sulfuric acid-producing bacteria was considered in this paper. Calcium aluminate cement (CAC) was known to resist microbiologically-induced corrosion significantly better than portland and blended portland cement.In this study, CAC as well portland cement mortars were tested as main binder to evaluate the corrosion resistance by the chemical immersion test. Replacement ratios of CAC were changed as 0, 20, 40, 50, 60% of OPC binder and 0, 2, 4, 6% of EVA(Ethylene Vinyl Acetate) were also adopted to increase properties of CAC repair mortars in sewage application. Setting time, compressive strength, acid resistance and adhesive strength were measured for various experiments. As a results of the experiments, the proper formulation of repair mortars was found at 40% of CAC and 4% of EVA. Finally, the CAC mortars adopted in field sewer pipe and were demonstrated to superior in adhesion and workability.

• 공업화학
• /
• 제28권6호
• /
• pp.645-648
• /
• 2017

전량 수입에 의존하고 있는 ABS 수지의 내열성 강화를 위한 화합물인 N-phenylamleimide (PMI)의 상업화를 위한 촉매개발을 완료하였다. Maleic anhydride와 aniline과 반응을 통하여 중간체인 N-phenylmaleamic acid (PMA)를 정량적으로 얻은 후, PMI를 얻기 위한 촉매를 탐색하였다. Zinc acetate/$Et_3N$의 복합 촉매가 단일 산 촉매보다 우수한 성능을 보임을 확인하였다. 개발된 복합 촉매를 사용하여 추가 정제 공정 없이 90% 수율과 99.3%의 순도로 PMI를 합성할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.339-342
• /
• 2000

Recently, the importance of the conutermeasures for waste materials has pointed out. Waste glass is also one to waste materials used for the recycling in construction sites. The crushed waste glass has been used to make a glass polymer composite that can be applied for sewer, storm drain pipe and interlocking block, etc. In this study, the crushed waste glass is explored with the possibility of recycling it, as a substitute for fine aggregates. The prepose of this investigation is to improve the strengths and acid resistance of the UP mortars using crushed waste glass. The UP mortars are prepare with blast furnace slag fly ash filler. the UP-fine aggregate ratios the crushed waste glass replacements for fine aggregate are tested strengths before and after immersion(H (아래첨자2)SO(아래첨자4) 10%), weight change and acid resistance are also tested. From the test results, the relative strength or UP mortars using fly ash as filler are found to be somewhat superior to that of the UP mortars using blast furnace as filler, And a UP mortar with fly ash as a filler, a UP-fine aggregate ratio of 15% and a waste glass replacement if 50% for fine aggregate is recommended as optimal mix proportion of UP mortar using crushed waste glass. Accordingly, it is enough to assure the use of the crushed waare glass as an aggregate for the production of UP mortar.