• Applied Biological Chemistry
• /
• v.21 no.1
• /
• pp.22-30
• /
• 1978

The Fe complex formation of cyanidin-3-glucoside in acetate buffer solution $(pH1.7{\sim}6.0)$ was investigated spectrophotometically. Two different complexes were formed from cyanidin-3-glucoside and $Fe^{3+}$, which had the absorption maximum at 543nm in the pH range $3.0{\sim}4.0$ and at 570nm in the pH range $5.0{\sim}6.0$ respectively. The molar ratio of the complex formed in the lower pH range was appeared to be 1 : 1, whereas that of the complex formed in the upper pH range was not able to be determined definitely. Among several organic acids examined, citric acid has shown the marked inhibitory effect on the Fe-anthocyanin complex formation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.397-400
• /
• 1995

Effects of rheological parameters, such as shear rate, temperature, concerntration, salts on the apparent viscosity of chitosan(deacetylation degree: $84\%$, Mw: 267,000) dissolved in acetate buffer(pH 4.5) were investigated. Rheologiral properties of chitosan solution from cuticle of red snow crab (Chinonecetes japonicus) are as follows. $0.5\%$ chitosan in 0.1M acetate buffer (pH 4.5) solution showed Bingham flow having hysteresis loop. It's flow equation was $\sigma=0.757+19.6_\gamma(r^2=0.99)$. The viscosity of chitosan solution is exponentially increased with its concentration, and showed Arrhenius dependence with respect to the temperature $(10^{\circ}C-40^{\circ}C).$ When various salts were added to chitosan solution, the viscosity decreased as the concentration of counterion increased. But the type ot counterions itself does not have any significant effects on the viscosity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.307-314
• /
• 1998

PZT thin films were fabricated by the Sol-gel method. Starting materials used for the preparation of the stock solution were Pb-acetate trihydrate, Zr-normal propoxide and Ti-isopropoxide. 2-Methoxyethanol and iso-propanol were used for solution. For studying the diffusion of Pb ion into the substrates. We used bare Si substrate, $SiO_2/Si$ substrates which was produced by thermal oxidation and $TiO_2/SiO_2/Si$ which was mad by Sol-gel method. Densification and adhesion of thin films were observed by SEM. Phase formation of thin films and diffusion of Pb ion into the substrate were examined by XRD and ESCA, respectively. In the case of bare Si and $SiO_2/Si$ substrate, we obtained the perovskite phase at $700^{\circ}C$ and restricted a little the diffusion of Si ion into the film with $SiO_2$ buffer layer. In the case of $TiO_2/SiO_2/Si$, perovskite phase were obtained at $500^{\circ}C$ and the diffusion of Pb ion and Si ion were restriced.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.137-147
• /
• 1994

This study was designed to identify and quantitate airborne isocyanate simultaneously by HPLC. These samples were collected using 1-(2-pyridyl)piperazine(1-2PP) coated glass fiber filter from polyurethane painting works at 8 wood furniture factories in Kimpo and Inchun. The results obtained were as follows : 1. The most suitable mobile phase condition of simultaneously analyzing isocyanates was 0.01 M ammonium acetate buffer ACN(70/30) adjusted to pH 6.2 from the beginning of the analysis to 20 min and 0.01 M ammonium acetate buffer/ACN(50/50) adjusted to pH 6.2 from 21 min to 40 min using the gradient mode. The peaks of isocyanates were able to obtain within 30 min. 2. The recovery efficiencies for 2,6-TDI, 2,4-TDI, HDI and MDI urea derivates spiked at the target concentration on coated glass fiber tillers were 91.00, 93.42, 91.31 and 94.21 %, respectively. 3. The qualitative analysis of the isocyanates samples from polyurethane spray painting works in wood furnture factories identified Ihree isocyanates, 2,6-TDI, 2,4-TDI and MOI. And their concentration ranges were 0-312.6, 0-56.3 and $0-62.1{\mu}g/m^3$, respectively. A disadvantage of using the colorimetric method for isocyanate analysis is its inability of separating isocyanates. This study identified such three isocyanates as 2,6-TDI, 2,4-TDI and MDI from polyurethane spray painting works in wood furniture factories. These isocyanates were successfully quantitated by HPLC by modifying the mobile phase condition and switching to gradient mode.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.381-387
• /
• 1987

Distribution of superoxide dismutase (SOD) which catalyzes the dismutation of superoxide radicals to hydrogen peroxide and oxygen has been examined in various genera of bacteria. SOD was produced by various bacteria independent of genus and species with variation in superoxide dismutase activity of each bacteria. Bacillus circulans which produced relatively large amount of SOD was selected and used to investigate the optimum culture conditions and further studies. The compositions of optimum culture medium for the enzyme production were 1% glucose, 2% polypeptone, 0.l% NaCl, and 0.2mM of methyl viologen and initial pH was 6.0. The highest enzyme production was observed after 20 hours of cultivation at 3$0^{\circ}C$ on a reciprocal shaker. The enzyme activity was maintained stably for a relatively long period by the addition of 5% ethanol in pH 5.0, 0.01M acetate buffer.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.213-221
• /
• 1998

The determination of inorganic anions by capillary zone electrophoresis is reported. A ten component synthetic mixture of anions of bromide, chloride, fluoride, nitrite, nitrate, sulfite, sulfate, perchlorate, chlorate and chlorite was separated by the capillary column and detected by indirect UV method. The running buffer contained 5 mM ammonium dichromate, 10 mM ammonium acetate, 20 mM diethylenetriamine, 10% methanol solution at pH 9.3. A potential of 15 kV at the cathode (reversed polarity) was utilized for the separation of inorganic anions. A complete separation of anions was achieved in less then 10 min and the applicabilities of the method for the analysis of real samples was demonstrated. We compare the concentration of anions in toluene inhaled humen's urine and in postmortem bloods obtained by capillary zone electrophoresis and ion chromatograph.

• Restorative Dentistry and Endodontics
• /
• v.29 no.3
• /
• pp.249-266
• /
• 2004

The purpose of this study was to determine whether pH and time has any influence on the degradation behavior of composite restoration by analyzing the leached monomers of dental composites qualitatively and quantitatively after storage in acetate buffer solution as a function of time using high performance liquid chromatography (HPLC) / mass spectrometer. Materials and Methods：Three commercial composite restorative resin materials (Z-250, Heliomolar and Aeliteflo) with different matrix structure and filler composition were studied. Thirty specimens (7mm $diameter{\times}2mm$ thick) of each material were prepared. The cured materials were stored in acetate buffer solution at different pH (4, 7) for 1, 7 and 45days. As a reference, samples of unpolymerized composite materials of each product were treated with methanol (10mg/ml). Identification of the various compounds was achieved by comparison of their mass spectra with those of reference compound, with literature data. and by their fragmentation patterns. Data were analysed statistically using ANOVA and Duncan's test. Results：1. Amounts of leached TEGDMA in Aeliteflo were significantly larger than those of UDMA in Z-250 and Heliomolar at experimental conditions of different storage time and pH variation (p<0.001). 2. As to comparison of the amounts of leached monomers per sorage time, amounts of leached TEGDMA in Aeliteflo and UDMA in Z-250 and Heliomolar were increased in the pH 4 solution more significantly than in the pH 7 solution after 1day, 7days and 45days, respectively (p<0.001). 3. In total amounts of all the leached monomers with storage times, the overall amounts of pH 4 extracts were larger than those of pH 7 extracts for all resin groups, but there was no significant difference (p>0.05).

• Korean Journal of Veterinary Research
• /
• v.39 no.5
• /
• pp.930-937
• /
• 1999

Atrial natriuretic peptide(ANP) is a hormone with potent natriuretic, diuretic and relaxing properties on vascular smooth muscle. Specific chemical modulator in response for the ANP secretion has not been found yet. Therefore, we have investigated the role of $Ca^{2+}$ responsible for the regulation of ANP induced by protein kinase C(PKC) on mechanically stretch-induced ANP secretion in the rat atria. The results obtained were as follows ; 1. ANP secretion and ANP concentration were increased to more in $Ca^{2+}$-free buffer than in the Kreb-Henseleit buffer on mechanically stretch-induced ANP secretion(p < 0.05), but extracellular fluid translocation(ECF) was not significant. Phorbol 12-myristate 13-acetate(PMA, $10^{-7}M$) induced ANP secretion and ANP concentration in $Ca^{2+}$-free buffer shown to more accentuate on mechanically stretch-induced ANP secretion than in the $Ca^{2+}$-free buffer(p < 0.05), but ECF translocation was not significant. 2. In the presence of ryanodine($3{\times}10^{-6}M$), PMA($10^{-7}M$) induced ANP secretion and ANP concentration in the Kreb-Henseleit buffer were shown to more increase on mechanically stretch-induced ANP secretion than in the ryanodine($3{\times}10^{-6}M$) with the Kreb-Henseleit buffer(p < 0.05), but ECF translocation was not significant. 3. In the presence of ryanodine($3{\times}10^{-6}M$), PMA($10^{-7}M$) induced ANP secretion and ANP concentration in the $Ca^{2+}$-free buffer was shown to more increase on mechanically stretch-induced ANP secretion than in the ryanodine($3{\times}10^{-6}M$) with the $Ca^{2+}$-free buffer on mechanically induced ANP secretion(p < 0.05), but ECF translocation was not significant. The results suggest that PKC-induced ANP secretion may not be related to the change of $Ca^{2+}$ on mechanically induced ANP secretion in the rat atria.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.369-378
• /
• 2009

Protein fractionation was evaluated from whole crop silages of rye (RS), wheat (WS), triticale (TS), oat (OS), barley (BS), and rice straw silage (RSS), and in vitro trial was carried out to examine the effect of silage and extraction of soluble protein on fermentation characteristics, total gas production and degradation. Soluble protein of silages was extracted with borate-phosphate buffer, and fermentation characteristics, gas production and degradation of silages were estimated by incubating anaerobically the mixed solution of strained rumen fluid and artificial saliva (1:1, v/v) containing dried and ground silages placed in nylon bag at $39^{\circ}C$ up to 48h. Soluble protein (SP) content was lowest for RSS as 2.11% in total CP compared to those for other silages. Highest A fraction (NPN) was observed from RS (74.33% of total CP) while those from TS and RSS were relatively low (48%). B2 fraction was relatively higher for RS, RSS and WS than for TS and BS. $B_3$ fraction was lowest in WS among silages. C fraction (27.07) in RSS was higher than in other silages (1.40~9.93%). pH in incubation solution was increased (P<0.01~P<0.001) for extracted silages up to 12h but decreased (P<0.01) at 48h for non-extracted ones. Contents of ammonia-N (P<0.001) and total VFA (P<0.01~P<0.001) were higher for non-extracted silages than for extracted ones. Acetate proportion was increased (P<0.001) in buffer extracted silages while those of propionate and butyrate were decreased (P<0.001) up to 24h incubation. Increased (P<0.001) total gas production was obtained from non-extracted silages up to 12h while gas production was increased (P<0.01) in extracted ones thereafter. In vitro degradation of dry matter and CP was increased (P<0.001) in non-extracted silages but that of neutral detergent fiber was increased (P<0.001) in extracted ones without difference among silages. Difference in mean values of degradability for each silage prior to- and post extraction with borate buffer, however, was not found among silages. It may be concluded that high NPN content of silages may reduce the protein availability in silages and borate buffer soluble components in silages can stimulate the early stage of fermentation.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.3
• /
• pp.204-209
• /
• 1994

The synthesis of N-(benzyloxycarbonyl)-L-aspartyl-L-phenylalanine methylester (Z-APM), a precursor of aspartame, from N-(benzyloxycarbonyl)-L-aspartic acid (Z-Asp) and L-phenylalanine methylester hydrochlolide($L-PM\cdot HCI$) was investigated in a saturated-ethylacetate single phase system using immobilized thermolysin. Among the various supports tested, glyceryl-CPG was found to be most efficient for retaining enzyme activity. The enzyme immobilized onto glyceryl-CPG also showed the highest activity for Z-APM synthesis in saturated ethyl acetate. Z-APM conversion yield in saturated ethylacetate was half of that obtained in an ethyl acetate-buffer two-phase system under the same reaction conditions. However, as the mole ratio of $L-PM \cdot HCI$ to Z-Asp was increased to 4.0, the conversion yield reached 95 %. When continuous synthesis of Z-APM was canied out in a plug flow reactor (PFR) with 80 mM of L-PMㆍHCI and 20 mM of Z-Asp in saturated ethylacetate (pH 5.5), more than 95 % of Z-Asp was converted to Z-APM with a space velocity of 1.16 $hr^{-1} at 40^{\circ}C$. Although the operational stability in PFR was reduced rapidly, more than 80% of initial activity was maintained in CSTR even after a week of operation.