• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.45-52
• /
• 2023

Due to natural disasters such as heavy rain that occurred in the metropolitan area in August 2022, human casualties and property damage are increasing. Accordingly, the government is making efforts to respond to natural disasters, but due to the absence of related standards and standardized standards, problems such as increased construction costs and deterioration in construction quality for disaster prevention facility maintenance projects are occurring. Accordingly, a rough construction cost estimation module was developed and applied to 25 new pumping stations in Korea. As a result of the analysis, the accuracy of the rough construction cost derived through the module recorded 70% of the detailed design cost, which is 4% higher than the previously used rough construction cost accuracy of 66% by the Ministry of Environment. Accordingly, it is expected that the efficiency of the disaster prevention project can be increased if the developed module is used to calculate the rough construction cost for storm and flood disaster prevention in the future.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.28-41
• /
• 2023

Non-aflatoxigenic Aspergillus oryzae and aflatoxigenic A. flavus cannot be clearly identified by partial sequencing of the internal transcribed spacer (ITS) and 18S ribosomal ribonucleic acid (18S rRNA) regions. This study aimed to compare the accuracy among three aflatoxin detection methods using ultra-performance liquid chromatography (UPLC), high-performance liquid chromatography (HPLC), and an enzyme-linked immunosorbent assay (ELISA) kit and to select the non-aflatoxigenic Aspergillus sp. isolated from soybean paste. All analytical methods were suitable according to the international standards of Codex Alimentarius FAO-WHO (CODEX) or the Ministry of Food and Drug Safety (MFDS). UPLC exhibited the best of limit of detection (LOD) and limit of quantification (LOQ). Based on UPLC, HPLC, and the ELISA kit assay, the P5 and P7 strains isolated from soybean paste had 1,663.49, 1,468.12, and >20 ㎍/kg and 1,470.08, 1,056.73, and >20 ㎍/kg, respectively, detected and re-identified as A. flavus. In contrast, the P3 and P4 strains (A. oryzae), which were detected below the MFDS standards in all assays, were confirmed as non-aflatoxigenic fungi. Among the methods evaluated for quantitative analysis of aflatoxin, UPLC and HPLC are superior in terms of accuracy, and the ELISA kit rapidly detects low concentrations of aflatoxin. Furthermore, this study demonstrates that any Aspergillus sp. isolated for use as a fermentation starter should be analyzed for potential aflatoxin production using UPLC and HPLC for accurate quantitative analysis or ELISA for the rapid detection of low-level concentrations of aflatoxin.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.249-255
• /
• 2010

Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science (KRISS) has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced a SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-1}$ Pa-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to $10^{-4}$ Pa with an uncertainty of less than 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.

• Journal of the Korean housing association
• /
• v.24 no.2
• /
• pp.45-52
• /
• 2013

The Purpose of this study is to improve construction quality with area calculation methods from BIM design technology. BIM has been supporting public-private-organizations and academic circles as a solution technology to manage and produce informations effectively from construction field including facility manage one. BIM standards are necessary but not sufficient for achieving perfect practical application in South Korea. In particular, development of architectural rule based area calculation methods is very urgent and important to improve construction quality. To solve those problems, methods and standards on area calculation are developed and its effectiveness of the proposed BIM-based methods is defined through the analysis between the existed area calculation method and process which are 2D based. This study will not only improve economic efficiency and accuracy of the construction quality but also settle the BIM environment in the domestic architecture.

• The korean journal of orthodontics
• /
• v.42 no.6
• /
• pp.297-306
• /
• 2012

Objective: This in vitro study was undertaken to evaluate the physical, chemical, and biological properties of commercially available metal orthodontic brackets in South Korea, because national standards for these products are lacking. Methods: Four bracket brands were tested for dimensional accuracy, (manufacturing errors in angulation and torque), cytotoxicity, composition, elution, and corrosion: Archist (Daeseung Medical), Victory (3M Unitek), Kosaka (Tomy), and Confidence (Shinye Odontology Materials). Results: The tested rackets showed no significant differences in manufacturing errors in angulation, but Confidence brackets showed a significant difference in manufacturing errors in torque. None of the brackets were cytotoxic to mouse fibroblasts. The metal ion components did not show a regular increasing or decreasing trend of elution over time, but the volume of the total eluted metal ions increased: Archist brackets had the maximal Cr elution and Confidence brackets appeared to have the largest volume of total eluted metal ions because of excessive Ni elution. Confidence brackets showed the lowest corrosion resistance during potentiodynamic polarization. Conclusions: The results of this study could potentially be applied in establishing national standards for metal orthodontic brackets and in evaluating commercially available products.

• Steel and Composite Structures
• /
• v.14 no.3
• /
• pp.205-227
• /
• 2013

Current design standards do not provide adequate guidelines for the fire design of cold-formed steel compression members subject to flexural-torsional buckling. Eurocode 3 Part 1.2 (2005) recommends the same fire design guidelines for both hot-rolled and cold-formed steel compression members subject to flexural-torsional buckling although considerable behavioural differences exist between cold-formed and hot-rolled steel members. Past research has recommended the use of ambient temperature cold-formed steel design rules for the fire design of cold-formed steel compression members provided appropriately reduced mechanical properties are used at elevated temperatures. To assess the accuracy of flexural-torsional buckling design rules in both ambient temperature cold-formed steel design and fire design standards, an experimental study of slender cold-formed steel compression members was undertaken at both ambient and elevated temperatures. This paper presents the details of this experimental study, its results, and their comparison with the predictions from the current design rules. It was found that the current ambient temperature design rules are conservative while the fire design rules are overly conservative. Suitable recommendations have been made in relation to the currently available design rules for flexural-torsional buckling including methods of improvement. Most importantly, this paper has addressed the lack of experimental results for slender cold-formed steel columns at elevated temperatures.

• Wind and Structures
• /
• v.12 no.6
• /
• pp.505-517
• /
• 2009

Synchronous wind-induced pressures, measured in wind-tunnel tests on model buildings instrumented with hundreds of pressure taps, are an invaluable resource for designing safe buildings efficiently. They enable a much more detailed, accurate representation of the forces and moments that drive engineering design than conventional tables and graphs do. However, the very large volumes of data that such tests typically generate pose a challenge to their widespread use in practice. This paper explains how a wavelet representation for the time series of pressure measurements acquired at each tap can be used to compress the data drastically while preserving those features that are most influential for design, and also how it enables incremental data transmission, adaptable to the accuracy needs of each particular application. The loss incurred in such compression is tunable and known. Compression rates as high as 90% induce distortions that are statistically indistinguishable from the intrinsic variability of wind-tunnel testing, which we gauge based on an unusually large collection of replicated tests done under the same wind-tunnel conditions.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.491-500
• /
• 2005

Every time laboratory in the world follows an international standard time scale and GPS (Global Positioning System) is playing an important role. Korea Research Institute of Standards and Science is also operating a permanent GPS station for time transfer. To improve the accuracy and precision of the clock offsets derived from GPS we used carrier phase measurements. In addition, we tested four different kinds of GPS satellite orbits and compared the results. The precision of the time offsets using rapid and ultra-rapid orbits was about 0.5 nanoseconds (ns). Tn the case of broadcast orbits, the precision was better than 2 ns.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3040-3053
• /
• 2015

Wideband code division multiple access (WCDMA), high speed packet access (HSPA) and HSPA+ are third generation partnership project (3GPP) standards. These systems are the major wireless communication standards. In order to test the performance of WCDMA/HSPA/HSPA+ signal in a base station, the measurement hardware is required to the evaluation of the transmitted signals. In this paper, the algorithm for the performance measurement of the WCDMA/HSPA/HSPA+ is proposed. Also, the performance of the measurement algorithm is used to evaluate the generated signal by the WCDMA/HSPA/HSPA+ signal generator. Generally, the algorithm of normal modems cannot be applied to the measurement system because the signal measurement equipment needs to guarantee the high accuracy. So, the WCDMA/HSPA/HSPA+ signal measurement algorithm for the accurate measurement is proposed. By the simulation, it is confirmed that the proposed measurement algorithm has good performance compared with the specification. Therefore, the proposed algorithm can be usefully applied to verify the performance of the measurement using the simulation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.86-88
• /
• 2003

New cities and industrial complexes are being developed actively according to the government's policy. To determine the size of investment, number of power lines and substations for stable power supply to newly developed industrial complexes, the accurate estimation of power demand is necessary. "The standards for the estimation of power demands in newly developed residential and industrial complexes" established by KEPCO in 1991 have been used up to now. But the background for the estimation of power demands is weak and the accuracy has not been verified. Also, it has been passed above 10 years since their establishment and the social & economic situations have changed a lot, which requires an urgent revision. Through this survey and analysis of existing areas, new standards that will enable more accurate estimation of power demands in new cities and industrial complexes to be developed in the future are established by calculating the some kinds of power demand factors.