• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.493-502
• /
• 2013

For various geospatial information such as planimetric and topographic features, the required accuracy may be defined depending on the purpose of GIS applications. Also, the accuracy of the geospatial information have a major impact on the quality of the raw surveying data. In order to be usefully applied the precise geospatial information, the accuracy standards must be appropriately set so that the digital map as base map can be accurately made. Before computer mapping and GIS technology existed, paper maps were drawn by hand. So, the map scale was a significant contributor to the map accuracy. As such the past, the accuracy of maps is determined the scale at which the map would be drawn, but recent trends are to treat accuracy as a one of quality elements, rather than a specification for producing the map. Therefore, the purpose of this paper is to set the new korean map accuracy standards appropriate for the construction and application of the precise geospatial information on behalf of the current representation of korean digital maps.

• The Korea Genome Conference
• /
• 2005.09a
• /
• pp.71-71
• /
• 2005

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.62-66
• /
• 2016

Optical system needs to be aligned before its undergoing process, is usually shows coma aberrations, which occurred due to imperfection in the lens or other components results in off-axis point sources, appearing to have a tail like a comet. There are some methods to correct coma aberration. In this paper, to correct coma aberration in optical system, using a robot arm type coordinate measuring machine(CMM). CMMs are widely used to measure the form of accuracy of parts and positioning accuracy of systems. Among them, robot arm type CMM has more advantages than the others, such as its mobility and measuring range. However, robot arm type CMM has lower accuracy than cantilever type CMM. To prove robot arm type CMM's accuracy, several factors were suggested in this paper and the final measuring results were compared to a commercial cantilever type CMM. Based on this accuracy, a typical optical system was successfully aligned by using our robot arm type CMM.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.51-51
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.54-54
• /
• 2006

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.201-209
• /
• 2023

Time comparison techniques are required for generating and keeping Coordinated Universal Time (UTC) and to distribute standard clocks. These techniques play an important role in various fields, including science, finance, military, and communication. Among these techniques, Two-Way Satellite Time and Frequency Transfer (TWSTFT) ensures a relatively high accuracy, with a time comparison accuracy at a nanosecond level. However, TWSTFT systems have some limitations, such as the dependency on extra network links. In this paper, we propose an improved method for TWSTFT system operation and design a message structure for the suggestion. Additionally, we estimate the data rate and redundancy for the new TWSTFT signal with the designed message structure.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.71-80
• /
• 1997

This paper suggests a Map Accuracy Standards by analyzing U.S. National Map Accuracy Standards, by considering korean terrain feature and statistical error theory for paper and digital maps on the scale of 1:50,000. Map accuracy standards require horizontal accuracy to be reported as a circular error with 90% confidence level through Linear Error Probable(LEP) theory and Circular Error Probable(CEP) theory. In order to verify the proposed methodology for positioning accuracy testing, several kinds of test point were selected and tested. These test points were extracted at the centers of roads and bridges, the comers of the independent building, the edges of geographical botany, and the tops of mountains. The positioning accuracy assessment was peformed by comparing the positions of test points in digital maps generated three different sources with those acquired by high accurate GPS surveying. The digital maps were produced from aerial photographs and SPOT satellite image using analytical plotter and 1:50,000 paper map.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.53-53
• /
• 2006

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.116-123
• /
• 2008

In the launch mission, mission control systems and tracking systems need time synchronization for data monitoring and data analysis. There are several standards for time synchronization and an adequate standard is selected according to the requirement of time accuracy and cost among time synchronization standards. Oscillators are used to maintain time accuracy. There are some kinds of oscillators with diverse characteristics and an adequate oscillator can be adopted according to time accuracy. In this paper, we will specify characteristics of several oscillators and standards generally used for time synchronization. And we will also introduce TSDN(time synchronization and display network) for time synchronization in Naro Space Center.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.13-21
• /
• 1992

Standards concerning the determination of positioning accuracy and repeatability of numerically controlled(NC) machine tools have been published relentlessly over the last 20 years. Since the publication in 1988 of the International Standard 230-2 there has been a pronounced move, both at national and international standards level, to embrace further test procedures for a complete machine tool performance assessment. For example, measurements of angular (pitch, roll, and yaw) and straightness errors along linear axes are now commonplace and complement the existing positioning accuracy and repeatablity tests. More recently the subject of circularity evalutaion has also gained considerable interest. Here dynamic tests, using a kinematic ballbar or circular masterpiece, give an instant overview of the contouring ability of the machine in two axes at specific feedrates. This information is extremely important in optimising machining accuracy. This paper describes moves to complete the machine calibration package in national and international standardis- ation for the assessment of machine tool performance.