• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.246-258
• /
• 2012

Particulate matter deposited on leaf surfaces may cause erosion/abrasion of epicuticular wax and the malfunction of stomata. However, the deposition processes of particulate matter, such as elemental carbon (EC), has not been studied sufficiently in Asian forest ecosystems. Deposition processes for particulate ${SO_4}^{2-}$ and EC were studied in a Japanese cedar forest in Kajikawa, Niigata Prefecture, Japan, and in a dry evergreen forest and a dry deciduous forest in Sakaerat, Nakhon Ratchasima province, Thailand. The ${SO_4}^{2-}$ fluxes attributed to rainfall outside the forest canopy (RF), throughfall (TF), and stemflow (SF) showed distinct seasonalities at both sites, increasing from November to February at the Kajikawa site and in March/April at the Sakaerat site. Seasonal west/northwest winds in winter may transport sulfur compounds across the Sea of Japan to the Kajikawa site. At the Sakaerat site, pollutants suspended in the air or dry deposits from the dry season might have been washed away by the first precipitations of the wet season. The EC fluxes from RF and TF showed similar variations by season at the Kajikawa site, while the flux from TF was frequently lower than that from RF at the Sakaerat site. Particulate matter strongly adsorbed onto leaf surfaces is not washed away by rainfall and contributes to the EC flux. At the Kajikawa site, Japanese cedar leaf surfaces accumulated the highest levels of particulate matter and could not be neglected when calculating the total flux. When such leaf-surface particles were considered, the contribution of dry deposition to the total EC flux was estimated to be 67%, 77%, and 82% at the Kajikawa site, and at the evergreen and deciduous forests of the Sakaerat site, respectively. Leaf-surface particles must be included when evaluating the dry and total fluxes of particulate matter, in particular for water-insoluble constituents such as EC.

• Journal of Wetlands Research
• /
• v.9 no.2
• /
• pp.1-8
• /
• 2007

Since 2000, environmental policies and regulations in Korea are rapidly changing to TMDL(Total Maximum Daily Load) and nonpoint source control. This is due to bad water quality in drinking water sources. Although many environmental facilities having high removal efficiency are constructed and applied in nationwide for controling various pollutants from wastewaters, the water quality in rivers is worse and worse because of nonpoint pollution. In fact, TMDL is a new environmental regulation controling total daily loadings from watershed areas. Actually, the nonpoint pollutant is originated from various landuses and its control is based on TMDL regulation. Therefore, this research is performed to determine the size of detention basin to control nonpoint pollutants from resort developing areas. The detention basin is one of best management practices, which is useful for controling pollutants and flooding from the developing areas. However, it should be designed and constructed with cost effective method. Recent 10 years rainfall data are used to determine the size of detention basin. The cost effective size is determined to 7.4mm accumulated rainfall.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.246-253
• /
• 2012

Despite frequent freezing injury to tea trees due low temperature, drought, and strong wind during wintertime, no comprehensive measurements have been taken. We selected and examined 9 locations in Hwagae-myeon and 4 places in Agyang-myeon, Hadong-gun, Gyeonsanggnam-do where low temperature damage had occurred between December 2010 and February 2011. Our objective is to examine the effect of frost damage on the morphological symptom and harvest of a tea tree exposed to a constant low temperature environment during wintertime. The results of our analyses on meteorological environment, tea leaf chromaticity, water content and trypan blue are as follows: (1) the number of days with temperature of $-10^{\circ}C$ or less, which were subject to frost damage to a tea tree were 8 and 13.6% during the winterization period in 2011; (2) the accumulated time was 1,308 minutes, and the longest duration at $-10^{\circ}C$ was 588 minutes from 21:08 p.m. 15 January to 7:30 a.m. $16^{th}$ January. The rainfall was only 104 mm which was 306 mm less than the previous year; (3) the lightness L values in 2011 were higher than in 2012 due to dehydration and necrosis by blue discoloration and red discoloration at all areas in chromaticity measurement; (4) the water content in a tea leaf in 2011 was higher than in 2012 due to low rainfall and strong wind, and almost no cell death phenomenon was observed from normal tea leaves subject to no low temperature stress in a trypan blue analysis; and (5) partial coloration due to cell death, however, took place in the leaves damaged by blue discoloration subject to low temperature stress, and most coloration due to cell death took place in the leaves damaged by red discoloration.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.267-275
• /
• 2018

The dredged sediment management system was developed to have an objective, quantitative and scientific decision for the optimum removal time of dredged sediments behind debris barrier and was set up at the real site. The dredged sediment management system is designed and developed to directly measure the dredged sediments behind debris barrier in the field. This management system is composed of Data Acquisition System (DAS), Solar System and measurement units for measuring the weight of dredge sediments. The weight of dredged sediments, the water level and the rainfall are measured in real time using the monitoring sensors, and their data can be transmitted to the office through a wireless communication method. The monitoring sensors are composed of the rain gauge to measure rainfall, the load cell system to measure the weight of dredged sediments, and water level meter to measure the water level behind debris barrier. The management criteria of dredged sediments behind debris barrier was suggested by using the weight of dredged sediments. At first, the maximum weight of dredged sediments that could be deposited behind debris barrier was estimated. And then when 50%, 70% and 90% of the maximum dredged sediments weight were accumulated behind debris barrier, the management criteria were divided into phases of Outlooks, Watch and Warning, respectively. The weight of dredged sediments can be monitored by using the dredged sediment management system behind debris barrier in real time, and the condition of debris barrier and the removal time of dredged sediments can be decided based on monitoring results.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.9-24
• /
• 2022

Currently, a vast amount of hydrologic data is accumulated in real-time through automatic water level measuring instruments in agricultural reservoirs. At the same time, false and missing data points are also increasing. The applicability and reliability of quality control of hydrological data must be secured for efficient agricultural water management through calculation of water supply and disaster management. Considering the characteristics of irregularities in hydrological data caused by irrigation water usage and rainfall pattern, the Korea Rural Community Corporation is currently applying the Hampel filter as a water level data quality management method. This method uses window size as a key parameter, and if window size is large, distortion of data may occur and if window size is small, many outliers are not removed which reduces the reliability of the corrected data. Thus, selection of the optimal window size for individual reservoir is required. To ensure reliability, we compared and analyzed the RMSE (Root Mean Square Error) and NSE (Nash-Sutcliffe model efficiency coefficient) of the corrected data and the daily water level of the RIMS (Rural Infrastructure Management System) data, and the automatic outlier detection standards used by the Ministry of Environment. To select the optimal window size, we used the classification performance evaluation index of the error matrix and the rainfall data of the irrigation period, showing the optimal values at 3 h. The efficient reservoir automatic calibration technique can reduce manpower and time required for manual calibration, and is expected to improve the reliability of water level data and the value of water resources.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.1
• /
• pp.23-31
• /
• 1996

The heavy metal concentration in mixed and separately collected household food waste, and their compost during the composting period was analysed. The mixed and separately collected food waste had Cd content of 8 mg/kg in spring and its content of 13 mg/kg in winter respectively. Its content was higher than by-product compost limit value(5 mg Cd/kg). Cd concentration in separately collected food waste in a house was higher in January, February, April and May than by-product compost limit value (5 mg Cd/kg). When Cd concentration in the initial composting material was higher than 5 mg/kg, its concentration in the compost of household food waste during the composting period was higher than by-product compost limit value, but it was not accumulated in the compost during the composting period. Fly ash was added to separately collected household food waste to adjust its moisture content for composting. Its addition had moisture conditioning and Cd concentration reducing effect in the compost. The average one month composted fresh compost from the mixed collected household food waste was matured in a pile out of doors for 7 months with turning the pile once a month and its heavy metal concentration was examined. Accumulation of the heavy metals in the compost did not occur during the composting period, because they were washed out during the rainfall.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.166-169
• /
• 1997

The fresh food waste compost, which was composted in a small bin for average one month, was cured in a pile in the field for seven months. The pile was turned once a month. The various components of the compost were investigated for the curing period. The maximun temperature rised to $65^{\circ}C$ after curing of four months. The moisture content of the compost droped to 61.7% after twelve months. After that, the rainfall affected very much the moisture content of the compost. pH of the compost increased gradually to 8.92 for curing. Ash content rised continually to 60.5% for curing. However, it did not exceed 25% ash content, which is the by-product limit value. The accumulation of the inorganic components occured and most of the heavy matals except for Cd generally were accumulated as curing proceeded.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.447-474
• /
• 2018

The purpose of this study is to build a new dataset of spatially interpolated climate data of South Korea by performing various geo-statistical interpolation techniques for comparison with the LDAPS grid data of KMA. Among 595 observation data in 2017, 80 % of the total points and remaining 117 points were used for spatial mapping and quantification,respectively. IDW, cokriging, and kriging were performed via the ArcGIS10.3.1 software and Python3.6.4, and each result was then divided into three clusters and four watersheds for statistical verification. As a result, cokriging produced the most suitable grid climate data for instantaneous temperature. For 1-hr accumulated precipitation, IDW was most suitable for expressing local rainfall effects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.58-64
• /
• 2020

Large-scale flooding due to extreme weather and typhoons causes heavy damage. This is especially true in urban areas where accumulated debris prevents the smooth drainage of rainwater in sewage facilities such as rain gutters installed near roads. In this study, to improve the drainage performance and effectively remove foreign substances by applying the dust screen used in rivers, the rain gutter with Coanda effect was simulated and compared with the experiment. The simulation was performed by setting the parameters to the fillet radius R₁ and R₂ at the top of the screen filter, the fillet radius R₃ at the bottom of the screen filter, and the height H of the gap W from the bottom. W is the gap at the backside of screen filter which is applied to stimulate the Coanda effect. According to the simulation results, the highest drain performance was 87.99% derived from R₁= 30mm, R₂= 5mm, R₃= 85mm, H= 75mm, and W= 2mm. The error rate of simulation results refer to the 4.89%~7.36% compared to the experimental results. In the future, by considering the slope according to the installation environment, the simulation results can be applied to the actual roadside to help prevent flood damage.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.94-94
• /
• 2011

최근에 산악지역에서의 국지성 강우에 의한 사고 발생이 증가하고 있고, 2009년에는 북한의 무단 댐방류로 인해 인명피해가 발생함에 따라서 산악이나 북한 지역과 같은 지역의 모니터링이 필요하게 되었으며, 강수량의 기후학적 분포의 특성과 같은 장기적인 강수량 정보가 필요하게 되었다. 레이더는 넓은 영역에 대해서 시 공간적으로 고해상도의 자료를 제공할 수 있기 때문에 국지 규모의 단시간 강수량 정보를 제공하는데 유용하다. 국립기상연구소(National Institute of Meteorological Research; NIMR)는 기존의 층운형 Z-R 관계식(Z=$200R^{1.6}$, Marshall-Palmer, 1948)을 이용한 레이더 강우강도 산출에서 과소추정 문제를 개선하기 위해 레이더-AWS 강우강도(Radar-AWS Rain rate; RAR) 산출 시스템을 개발하여 현재 운영하고 있다. RAR 산출 알고리즘은 각 레이더에 대해서 레이더 강우강도와 지상 AWS 우량계 자료를 비교하여 실시간으로 Z-R 관계식을 산출하여, 레이더 반사도를 강우강도로 변환하고, 이를 합성하여 한반도 영역에 대해서 강우강도 정보를 제공한다. 2010년에는 RAR 자료와 지상 AWS 우량계 자료를 이용하여 레이더-AWS 누적강수량을 산출하는 시스템을 구축하였으며, 현재 시험운영 중에 있다. 본 연구에서는 레이더-AWS 누적강수량의 정확도를 평가하기 위해서 2009년에 대해 레이더-AWS 누적강수량 자료와 지상 AWS 누적강수량 자료에 대해 RMSE, Bias 등의 통계값을 산출하였으며, 북한 지역에 대한 적용가능성을 분석하기 위해서 레이더 관측 반경 내의 북한 지역의 GTS 지점 자료를 이용하여 사례 분석하였다. 본 연구는 레이더 자료를 이용한 지상 관측 공백지역의 강수량에 대한 모니터링을 통하여 이러한 지역의 사고에 대비할 수 있고, 기후학적인 강수량 정보 제공 및 향후 유역별 레이더 면적강수지도 시험판 개발을 통하여 수문 기상 분야에 적용하여 효과적인 물관리에 기여할 수 있을 것으로 사료된다.