• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1766-1769
• /
• 1997

Fast and accurate distillation design requires a model that significantly reduces the problem size withour loss of accruacy is especially suitable for rela-time applicatoins. the reduced order model is obtained by use of Principal Component Anlysis(PCA). Then the extended Kalman filter and the Recursie Predictiuon Error(RPE) mehtod are appliced to identify the model parameters and the feed compostion form the measuremenets of the coumn. as a consequence it is found that the model reduction thechique can account for the dynamics of the rigorous distillation model and not only the model parameters, bu also the feed compostion can be identified efficiently. this technique is applied to industrial operation data verify the performance of reduced order model.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2252-2254
• /
• 1997

There are increasing demands on high accruacy DC power supplies for varous basic science reseach, such as accelerators and plasma applications, in Korea. In this paper, we present a study on 1kW class DC power supply using the parell operation method of the flyback converters. This DC power supply is equipped with a remote controller for computer interface. A Serial Communication Controller(SCC) is also developed for large scale scientific facilities which is capable of handling upto 32 power supplies simultaneously with one serial port in the host computer.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.63-68
• /
• 2009

The location of mobile terminals in cellular networks is an important problem in the field of information technology with applications in resource allocation, location sensitive browsing, and emergency communications. Finding location estimation techniques that are robust to non-line of light (NLOS) propagation is a key problem in this area. Time of arrival (TOA) and pattern matching (PM) measurements can be made simultaneously by CDMA cellular networks at low cost. The different sources of errors for each measurement type cause TOA and PM measurements to contain independent information about mobile station (MS) locations. This paper combines the information of PM and TOA measurements to calculate a superior location estimate. The proposed location estimator is robust, provides lower error than the estimators based on the individual measurements, and has low implementation costs.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.438-440
• /
• 2006

포항가속기 연구소의 선형가속기와 빔 전송선에는 22개의 솔레노이드 전자석, 38개의 사극전자석 그리고 전자빔의 궤도 조절을 위한 29개의 2극 전자석이 있다. 전자빔의 정밀 제어를 위한 전자적 전원장치는 고정도, 고안정도 출력 특성을 가져야 한다. 이를 위하여 풀-브릿지 4-상한 DC-DC 컨버터 토플로지의 4단 병렬운전을 채택하였다. 전원장치의 입력전압은 직류 40V이고, 최대 출력전류는 직류 50A이며 그리고 스윗칭 주파수는 50 kHz이다. 고정밀, 고안정도 출력전류를 얻기 위하여 입력단의 전원 노이즈 및 전력변환부의 스윗칭 노이즈를 제거하여야 한다. 이를 위하여 채택된 low-pass 필터의 cut-off 주파수는 입력과 출력단 각각 26 Hz와 4.5 kHz 이다. 출력전류에서 전원장치로부처 발생하는 주파수 성분을 완벽하게 제거하였다. 출력전류의 분해능은 1mA 이하이며, 안정도는 10시간 이상 장시간의 경우 +/-15 ppm 이하이고 1시간 이하 단시간의 경우 +/-10ppm 이하이다. 본 논문에서는 풀-브릿지 4-상한 DC-DC 컨버터 토플로지의 4단 병렬운전을 채택한 전자석 전원장치의 구성, 특성 그리고 실험결과에 대하여 기술하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4158-4163
• /
• 2015

In this paper, the solutions of TE(transverse electric) scattering problems by a condutive strip grating over a dielectric layer are analyzed by using the FGMM(fourier galerkin moment method) and PMM(point matching method) known as a numerical method of electromagnetic fileld. The scattered electromagnetic fields are expanded in a series of floguet mode functions, the boundary conditions are applied to obtain the unknown field coefficients, and the conductive boundary condition is used for the relationship between the tangential electric field and the induced surface current density on the strip. The numerical results for the reflected and transmitted power of zeroth mode analyzed by according as the width and spacing of conductive strip, the relative permittivity and thickness of dielectric layer, and incident angles. Generally, according to the relative permittivity of dielectric layer increased, also the normalized reflected power of zeroth mode increased. To examine the accruacy of this paper, the numerical results of FGMM shown in good agreement compared to those of PMM.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.1
• /
• pp.78-86
• /
• 2020

Dozer is an expensive construction equipment and has a significant performance impact on earthwork performance. A machine guidance system has been applied to dozer equipment as a solution that can improve the performance. The system can provide earthwork-related information to equipment operators so that earthworks can be carried out with minimum support from surveyors. Construction Equipment Machine guidance has the function of supporting earthwork according to an earthwork plan by providing excavation-related information to machine operators. The objective of this study is to evaluate the performance improvement of a machine guidance system for an dozer earthwork operation, and to compare the machine guidance method with the traditional method. The performance has been evaluated in two folds: 1) productivity and 2) accuracy. The productivity shows the quantity of earthwork for a given unit time. The accuracy shows the deviation of grading level from the designed level on the construction drawing for earthwork. The machine guidance system has been applied to a testing bed in a construction site. Data comparison analysis showed that the earth earthwork had 46.59% improvement in productivity as well as 46.96% improvement in accuracy, and is expected to provide a tool for applying smart constrction to the earthwork operation.