• 자원ㆍ환경경제연구
• /
• 제11권1호
• /
• pp.81-97
• /
• 2002

Unlike the existing supply-centered water policy, demand management policy of water has become an increasingly important issue in Korea. This paper attempts to analyse the demand for domestic water in Seoul. We employed Engle-Granger's error correction model(ECM) to deduced the price and income elasticities of the water demand. Particularly, we used accounted water amounts instead of supplied water amounts as representative variable of water demand. The result indicates that ECM set up is appropriate and short-run and long-run price elasticities derived by the model are -0.145 and -1.414. In contrast with other studies, we can conclude that the water demand for the water price is elastic. Besides, we can infer from this result that the water price policy with respect to a decrease of leakage ratio is more effective.

• 산업기술연구
• /
• 제28권A호
• /
• pp.125-132
• /
• 2008

As of 2003, construction waste has been produced at the level of 130,614.8 tons/day, in which the amount of waste concrete was 92,639.1 tons/day and accounted for about 66.4% of the amount of construction waste. Waste concrete is mainly produced in construction work and civil engineering work. Especially, road surface crushing method using a large amount of water requires thorough management of concrete wastewater. The aim of this study was to analyze water pollution due to concrete wastewater generated in repair of bridge deck using road surface crushing equipment and to suggest reasonable countermeasures for solve the problem. In this study, it was surveyed current conditions of produced concrete wastewater in bridge deck repair, analyzed physical features of concrete wastewater, expected effects of water pollution on inflow rivers if it is not treated, established treatment plan of water pollution by categories, and calculated capacity of each treatment process and required amount of necessary chemicals. As a result of sampling wastewater generated in field sites and testing it at a lab scale, it was revealed that the original wastewater was produced in removing concrete from bridge deck slabs using surface crushing equipment whose pH was 12.53, CODMn was 12.910mg/L, SS was 547.0mg/L, and other heavy metals were included in extremely small quantities.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.506-514
• /
• 2005

Unaccounted-for water subtracting water sold from produced water includes leakage, under-registration, unauthorized use, etc. To improve accounted-for water ratio, firstly, it should be attempted to accurately identify where unaccounted-for water is, and then it must to be reduced. Under-registration of meter is caused by allowable tolerance of meter, improper size of meter installed, gradient installation, etc. Under-registered water of meters has ever been the second large amount of unaccounted-for water next to leakage, but still is not estimated exactly. In this study, the estimated value as under-registered water was obtained by using the selected-area modeling program. As a result, the under-registered water ratio of 13mm meters was approximately 1.23%. Those of meters according to ages 1, 3, and, 5 years old were 1.46% 2.77% and, 2.26%, respectively but that of 7 years old meters showed over-registration of 1.59%.

• Wind and Structures
• /
• 제38권3호
• /
• pp.171-191
• /
• 2024

Wind Driven Rain (WDR) poses a significant threat to the building environment, especially in hurricane prone regions by causing interior and content damage during tropical storms and hurricanes. The damage due to rain intrusion depends on the total amount of water that enters the building; however, owing to the use of inadequate empirical methods, the amount of water intrusion is difficult to estimate accurately. Hence, the need to achieve full-scale testing capable of realistically simulating rain intrusion is widely recognized. This paper presents results of a full-scale experimental simulation at the NHERI Wall of Wind Experimental Facility (WOW EF) aimed at obtaining realistic rain characteristics as experienced by structures during tropical storms and hurricanes. A full-scale simulation of rain in strong winds would allow testing WDR intrusion through typical building components. A study of rain intrusion through a sliding glass door is presented, which accounted for the effects of multiple wind directions, test durations and wind speeds; configurations with and without shuttering systems were also considered. The study showed that significant levels of water intrusion can occur during conditions well below current design levels. The knowledge gained through this work may enhance risk modeling pertaining to loss estimates due to WDR intrusion in buildings, and it may help quantify the potential reduction of losses due to the additional protection from shuttering systems on sliding glass doors during winds.

• 한국농공학회논문집
• /
• 제50권2호
• /
• pp.11-16
• /
• 2008

The effects of water and pesticide management practices on ponded water pesticide concentrations in a paddy plot were analysed using the RICEWQ model. The molinate which is a herbicide widely used in rice culture, and frequently detected in paddy environment was selected. In a previous study, the RICEWQ model was successfully calibrated with field data obtained from a paddy plot in Daegu. The calibrated model was run using water and pesticide management scenarios with a set of measured meteorological data for 1997-2006 in Daegu. For all three ponded water depths with the label rate application, the amount of molinate dissipated in ponded water and volatilized accounted for more than 70%, and the runoff losses were less than 9%. The molinate losses through drainage in the very shallow ponded depth showed 40% less than that in deep ponded depth. Comparing with the deep and shallow ponded depth, the very shallow depth was the best with regards to the reduction of molinate runoff losses. Simulations with different pesticide application rates, label rate and double label rate, showed molinate concentrations in the ponded water increased linearly with the application rate increase.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.331-337
• /
• 2006

Organophosphorus pesticides (OPs) were analyzed in surface water samples from the Saemangeum environment. IBP was the most abundant among 10 OPs analyzed, and accounted fur over 95% of total amount of OPs. Concentrations of IBP measured in Mangyeong River water and surface seawater ranged from 670 to 1100ng/l and from 45 to 1000 ng/l, respectively. In general, a decreasing trend of OP concentrations towards open sea was observed. The concentrations of IBP and salinity demonstrated a strong correlation $(r^2=0.96)$. This indicates that IBP showed conservative behavior in the study area, and seawater dilution is a major factor affecting distribution and variation of OPs in the Sammgem environment.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.69-75
• /
• 2016

This study was conducted to examine the byproducts formation characteristics at the water treatment plants which applying electrolysis as a disinfection process in Gangwondo, Korea. Total of forty plants located in Gangwon Province, Korea were selected for the study. Correlation between dissolved organic carbon(DOC) and $SUVA_{254}$ was not clear. Among the species of the disinfection byproducts(DBPs), chlorate and trihalomethanes(THMs) accounted for 76% and 14% of DBPs, respectively. The effect of DOC or $SUVA_{254}$ on DBPs formation was not clearly demonstrated. The increased amount of THMs due to the raw water bromide content was found primarily in the form of chloroform, and the percent fraction of BDCM(bromodichloromethane) and DBCM(Dibromochloromethnae) was relatively insignificant. When the value of $SUVA_{254}$ was greater than $2L/mg{\cdot}m$, the percent fraction of BDCM and DBCM decreased while percent fraction of CF(chloroform) increased.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.521-526
• /
• 2004

It is necessary to analyze the unsteady flow in the pipe network for the better operation and controls, but there are some problems in actual pipe network simulation, such as collecting a large amount of information in the field, operating highly upgraded computer system, and keeping a big storage device to run analysis program. The skeletonization method is used to cope with the problems in this paper. It is expected to reduce computation time, researcher's efforts, and costs for the analyzing the pipe network. The impact of individual pipe elements to the behavior of the water distribution system can be accounted in the process of skeletonization. However it is also important to study continuously about how to apply the skeletonization method for each of different cases, because inadequate uses may bring simulation to a false result. This paper introduces basic theories and skeletonizing examples in the actual pipe network in Dae-gu city.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.607-612
• /
• 2007

In this study, we investigated the variations of the kinetic coefficients and Chemical Oxygen Demand (COD), N and P mass used for assimilation of a sequencing batch reactor (SBR) system with the variation of SRTs; SRTs of 7.5, 10.0, 12.5, 15.0 and 20.0 days were tested in one cycle of SBR operation to determine the optimum conditions for the operation of the SBR and estimate its COD, nitrogen and phosphorus removal efficiencies. The SBR system was operated under the conditions as follows: an operation time of 6 hours per cycle, a hydraulic retention time (HRT) of 12 hours, an influent COD loading of $0.4kg/m^3/day$, and an influent nitrogen loading of $0.068kgT-N/m^3/day$. The yield coefficient (Y) and decay rate coefficient ($k_d$) were estimated to be 0.4198 kgMLVSS/kgCOD and $0.0107day^{-1}$ by calculating the removal rate of substrate according to the variation of SRT. Considering total nitrogen amount removed by sludge waste process, eliminated by denitrification, and in clarified water effluent with reference to 150 mg/cycle of influent nitrogen amount, the percentage of nitrogen mass balance from the ratio of the nitrogen amount in effluent (N output) to that in influent (N input) for Runs 1~5 were 95.5, 97.0, 95.5, 99.5, and 95.5%, respectively, which is well accounted for, with mass balances close to 100%.

• 복식문화연구
• /
• 제23권6호
• /
• pp.1082-1096
• /
• 2015

The purpose of this study was to examine laundry behavior according to the number of households and the type of washing machine that each household used. The data was obtained from questionnaires filled out by 417 households, which included college students living in Seoul and Gyeonggi province. The results of this study are as follows: first, according to the results of survey about the number of household members and type of washing machine that household had, one or two-person households accounted for 24.0%. Regarding the type of washing machine that each household used, there were more drum washers. In households comprised of three or more persons, a higher percentage had a machine with a pulsator. Second, with regard to the method of classifying the wash in doing the laundry, all families classified the wash according to color and textile material. Third, with regard to the amount of detergent in doing the laundry, 63.5% of households used the recommended amount of detergent while 28.3% of households used more detergent than the recommended amount. Fourth, with regard to the set temperature of water in doing the laundry, 36.2% of households used cold water; this was the highest percentage. Fifth, with regard to input sequence in doing the laundry, most households put the wash in the machine in advance, and then filled the washer with water; 56.1% of households added a rinsing process for all washing processes.