• Journal of the Korea Safety Management & Science
• /
• 제18권1호
• /
• pp.9-15
• /
• 2016

In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, fatality rate per 10,000 persons by the mobiles cranes was 0.57 in 2011. Second, the in-depth analysis of the mobile crane accidents showed that the main factors of the accidents were the overturn of mobile crane, the fracture of connection part between mobile crane boom and rope, the breaking of rope and the misunderstanding over the signal between a mobile crane driver and workers around a mobile crane. Third, the order of high defection of connecting parts was bucket bolt, bracket and extension parts. Fourth, since there were several cases of overturn of mobile crane by itself in the in-depth analysis of the mobile crane, the over slop-proof device was proposed as the main alternative in this study. Fifth, the revision of standards of safety factor that shall be more than 10, of connecting parts of mobile crane was proposed.

• Journal of the Korean Society of Safety
• /
• 제36권4호
• /
• pp.37-46
• /
• 2021

According to the Korean Statistical Information Service, the number of fatal occupational accidents per 100,000 workers is the highest in Korea, among all the OECD countries. The safety of construction workers is managed by the construction technology promotion act (CTPA) and the occupational safety and health act (OHSA). A review of the current safety management laws is required to improve them for the construction industry, where the numbers of accidents and deaths are constantly increasing. Accordingly, the aim of this study was to identify the problems in unclear business areas through comparison and analysis of the CTPA and OHSA guidelines and establish effective site-dependent construction safety management plans. The overlapping safety and health management terms and tasks of organizations were derived along with identifying the overlapping items of the safety management and hazard and risk prevention plans. Based on these results, several improvements for the design stage, safety cost, and safety education have been suggested in this paper. In addition, an improved model based on the integration and an optimized compromise between these two laws for safety management in areas where many accidents have occurred in recent years has been reported here.

• Journal of the Society of Disaster Information
• /
• 제18권2호
• /
• pp.343-350
• /
• 2022

Purpose: The Taean oil spill in 2007 taught us a great lesson and is a representative example of a social disaster. It was overcome through the dazzling dedication and service of volunteers. However, behind the volunteers, they were directly or indirectly exposed to the spilled oil, resulting in health problems such as headaches and safety accidents. Safety accidents were caused by unsafe behavior, and unsafe behavior was caused by lack of safety awareness or ignorance. We want to find an education and training program to systematically raise safety awareness for volunteers in connection with the Occupational Safety and Health Act. Method: The occupational safety and health law, the laws related to coastal clean-up, and the unsafe behavior factors in the statistics of occupational accidents in the past year were mainly identified. Result: The contents of education and training hours to be provided for volunteers involved in coastal clean-up were presented in comparison with workers under the Occupational Safety and Health Act. Conclusion: Safety and health education for volunteers and volunteer managers is directly related to safety awareness and can prevent unsafe behavior.

• IE interfaces
• /
• 제10권2호
• /
• pp.99-107
• /
• 1997

The purpose of accident analysis is to obtain accurate and objective information about the causes of accidents in order to prevent accidents from reoccurring. This study investigated the characteristics and causes of occupational accidents in Korean industry by comparison with those of Japan and U.S.A The results show that there are some characteristics in the accidents of Korean industry; (1)larger companies tend to have lower accident rates than the smaller ones; (2) inexperience is related to high accident rates; (3) 'awkward or sudden movement' and 'caught in and between object' represents the leading accident type; (4) the body sites most vulnerable to injury are the hands and fingers; and (5) 'fractures' is the leading injury type. These findings identified in this study can be used to prevent the industrial accidents.

• Journal of the Korea Safety Management & Science
• /
• 제16권3호
• /
• pp.71-79
• /
• 2014

The scale of construction industry recently tends to become bigger and larger in line with development of construction technologies and methods. Although increasing usage of construction machinery has led to improving productivity, reducing schedule and cost, constructions workers have been exposed to unstable work environment, causing more and more accidents. Construction machinery-related laws and regulations has not been enacted and reflected the conditions and circumstances of the construction industry in a timely manner. A various construction machinery and equipments produced and changed in structure randomly are so widely used that related-accidents may occure gradually. Propose a plan for accidents prevention through the analysis of characteristics and cases on construction machinery-related accidents over the past five years from 2009 to 2013.

• Journal of the Korea Safety Management & Science
• /
• 제19권4호
• /
• pp.77-85
• /
• 2017

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers' replacement due to accidents caused by industrial accidents or accidents.

• International conference on construction engineering and project management
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.179-187
• /
• 2020

This paper investigates the construction equipment accidents by time. Construction sites are unique with many different hazardous conditions which cause accidents. According to the Occupational Safety and Health Administration (OSHA), accidents related to construction equipment are one of the most leading causes of fatal injuries in the construction industry. While there have been many studies investigating the equipment-related accidents, few research studies provided in-depth analyses about the time that accidents frequently occurred. By using the OSHA accidents data collected between 1997 and 2012, this paper analyzed the accidents data by time, equipment type including excavator, backhoe, dozer, and crane, accident cause, and injury class. The analyses revealed that the time window with most accidents was between 13:00 and 13:59. In terms of the injury class, the time windows with the highest numbers of equipment accidents were between 13:00 and 13:59 and between 11:00 and 11:59 for fatality and hospitalization, respectively. For the accident causes, equipment operator's error was the highest number of accident causes. It is expected that findings from the analyses can be used to more strategically develop management plans and guidelines to prevent accidents related to construction equipment to practitioners.

• Journal of the Korean Society of Safety
• /
• 제27권4호
• /
• pp.83-89
• /
• 2012

In order for start-up establishment to enter the business market, it has to get over the first mover advantage of the existing establishment. As a result, its working condition deteriorates and a great deal of occupational accidents take place. Based on 2009 standard, the occupational accident rate of start-up establishment is 1.28%, which is two times higher than existing establishment and the gap between manufacturing and service industry has been getting wide. For the characteristic of injured person in start-up establishment, it is showed that the occupancy rate of women and people with less than 30 age starting out in a career is high and the occupancy rate of occupational accident for holiday and night work is high. Therefore, the act for occupational accident prevention is needed in the early period of business and underprivileged group for occupational accident.

• Journal of the Ergonomics Society of Korea
• /
• 제28권4호
• /
• pp.101-107
• /
• 2009

In this study 1,079 occupational accident reports were used to examine the characteristics and causes of occupational injuries in the small-sized textile companies with less than 50 employees. These data were analyzed in terms of age of injured person, work experience, accident type, injury type, and agency of accident. The results show that there are some patterns: (1) injuries occur more frequently in the 40~49yr age group; (2) about half of all accident occurred during the first year of employment; (3) there is a higher percentage of sick people leaving in the 29~90day range; (4) 'caught in and between objects' represents the leading accident type; (5) the most common type of incidence is related to the machinery; (6) 'lower back injuries' is the leading type of occupational disorder. These results can be used to develop more effective accidental occupational injury prevention programs for small-sized textile industries.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제58권4호
• /
• pp.367-373
• /
• 2022

We analyzed work safety risk factors, which are likely to occur during fishing in gillnet fishing vessels using the written verdict of the Korea Maritime Safety Tribunal from 2016 to 2020, and considered work safety management. Of the total of 37 fatal accidents, three cases in the East Sea, six cases in the South Sea, and 28 cases in the West Sea were very frequent. The accident rate per vessel by sea area (%) was 0.08% in East Sea, 0.12% in South Sea, and 0.40% in the West Sea. Based on the East Sea, the number of fatal accidents was 1.6 times higher in the South Sea and 5.4 times higher in the West Sea. Six cases (16.2%) occurred during departure and preparation for fishing in the fishing process, and all other 31 cases (83.8%) occurred during fishing operation. In the order of accident types, 21 cases (56.8%) of being struck by object, eight cases (21.6%) of contact with machinery and six cases (16.2%) of falls from height were found to be fatal accidents in gillnet fishery. Human factors, such as fishers' carelessness and negligent safety management by captain accounted for 27 cases (73.0%) of the main cause, and 35 cases (94.6%) of the secondary cause. In addition to human factors such as fisher's carelessness and negligent safety management by captain, mechanical factors, environmental factors and management factors must be improved together to reduce human casualties. These results are expected to be utilized as basic data for reducing safety accidents during the work of fishers.