• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.39-39
• /
• 2017

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.101-108
• /
• 2007

Tugboat has carried out the important role and service in the maritime industry construction, such as port and sea bridge construction, fairway dredging and sea reclamation etc. Furthermore, tugboat takes the largest portion in number of vessel at the domestic registry and barges as big as the general merchant vessel, which are getting specialized and larger, are in operation. In spite of the increase of marine accident under this situation, there has been no proper measure for the safe navigation of tugboat in the aspect of a nation. This paper aims to propose the measure for the safe navigation of tugboat according to the frequent marine accident of tugboat with sea bridge. Therefore, we show a example of the sailing schedule and operation checklist based on the analysis of statistics and precedent of marine accident and the investigation of the actual operation state of tugboat in the aspect of a contract of carriage and a personnel setup, which should be checked by the operator of tugboat, pass through sea bridge safely and propose the safe traffic supporting system based on electronic chart system to improve the safe navigation of tugboat.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.71-78
• /
• 2007

Towing vessels have carried out the important role and service in the maritime industry construction, such as port and sea bridge construction, fairway dredging and sea reclamation etc. Furthermore, tugboat takes the largest portion in number of vessel at the domestic registry and barges as big as the general merchant vessel, which are getting specialized and larger, are in operation. In spite of the increase of marine accidents under this situation, there has been no proper measure for the safe navigation of tugboat in the aspect of a nation. This paper aims to propose the measure for the safe navigation of tugboat according to the frequent marine accident of tugboat with sea bridge. Therefore, we show an example of the sailing schedule and operation checklist based on the analysis of statistics and precedent of marine accident and the investigation of the actual operation state of tugboat in the aspect of a contract of carriage and a personnel setup, which should be checked by the operator of tugboat, to pass through sea bridge safely and propose the safe traffic supporting system based on electronic chart system to improve the safe navigation of tugboat.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.209-216
• /
• 2024

Four accidents occurred between 2020 and 2022 after car ferries built according to a coastal passenger ship modernization plan collided with other ships or came into contact with the dock when entering Jeju Port. Accidents primarily occurred owing to careless ship handling and drift by wind during ship handled by herself using bow and stern thrusters without tugboats. Accordingly, in this study, we analyzed the collision accident focusing on car ferry H and the critical wind speed at which the ship cannot be controlled using its own power, tugboat operation plan in increasing wind speed were proposed based on the power required for the ship to berth parallel to the pier without a tugboat considering the external force and moment generated while the ship is berthing. A analysis of the critical wind speed of car ferry H by relative wind direction when using tugboats or not according to the loading status and the berthing speed, showed that one tugboat should be used at the stern when the lateral wind speed is over 10 m/s and two tugboats should be used when the lateral wind speed is over 14m/s berthing at Jeju port.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.29-37
• /
• 2021

In the event of a marine pollution accident, Korea, which is bordered by the sea on three sides, would suffer tremendous damage. According to an analysis of marine pollution accidents in Korea, most pollutants were small fishing boats and tugboats. In particular, urgent safety measures are required due to the high incidence of marine pollution accidents caused by stranded tugboats. This study aims to decrease secondary marine pollution accidents by preparing measures to prevent accidents by stranded tugboats, the main source of pollution accidents. To this end an experiment was conducted to mark 63 locations where stranded accidents have occurred on the GPS plotters of 61 tugboats operating in Boryeong sea area. Its effectiveness was then investigated. The result showed that there was no stranded accident by the subject ship during the 20-month experiment period. As a result of survey of the captains, 36 out of 40 respondents (90%) stated that the experiment was significantly helpful in ensuring safe navigation, thus confirming its effectiveness. Various measures were proposed to prevent stranded accidents, including providing information to manufacturers and users by marking the location of grounded accidents on GPS plotters and posting the location information of unknown reefs on the official website of institution Korea Hydrographic and Oceanographic Agency.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.247-252
• /
• 2014

Despite the facts that navigation technology and educational programs were developed, and that maritime law has been enforced strictly, the number of maritime accidents has not dropped significantly. Accident prevention is emphasized because of the extreme life, property, and environmental losses that accompany maritime accidents. Even though there are a variety of preventive activities, their performance is not satisfactory. In order to promote preventive activities and to organize safety management, a Preventive Index of Ship Accident(PISA) and a Preventive Level of Ship Accident(PLSA) which are abstracted from the statistical data of ship accidents (2009~2013) are proposed. The survey module by which these variables can be calculated is composed of preventive domains such as education, engineering, enforcement and information, and is applied for the preventive indexes measurement of cargo, passenger, tanker, tugboat and fishery ships. We compared and analyzed measured result with statistical accident rates and cases to confirm the index utilities. It was found that there is some correlation between the index value and the ship accident rate. It is expected that this index will become useful to evaluate a preventive status for the prevention of ship accidents and for the maritime safety culture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2018

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessel looks like the barge ship, which is used for many purposes. In these vessels, basically, the power propulsion system is not installed but just towed by a towing vessel such as tugboats with ropes and wires. It means that the motions of towed vessel are basically dependent on the tracking route of towing boat. Therefore, in some cases, undesirable and unpredictable motions may be made by environmental factors such as wave, wind attack and so on. As a result, a collision accident with others may occur during maneuvering situation. Based on these facts, the authors try to encourage the steering performance of the towed vessel by using controllable rudders without any propulsion system. In this study, especially, a controllable vessel with three rudders is considered, and a mathematical model is induced for the future study. The model is described as surge, sway motion and inertia moment by following the general representation method for the surface ship.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.471-477
• /
• 2014

In general, a regular charterparty form is used as a charterparty for tugboats which are employed in marine construction and a bareboat charter form is generally used for barge boat charterparty. As the tug-barge charterparty which are currently used do not have a standardised form, contracting parties arbitrarily decide on the terms and conditions of the contract. As a result, provisions of the charterparty usually do not specify in the contract which party bears the burden of liability in case of accident. Furthermore, the terminologies used in the charterparty are different from legal terms of current commercial law which causes confusion. These problems can be solved mostly by clarifying the legal character of the charterparty between the contracting parties and by conforming the terminologies. In addition, endeavour to standardise the contract form must be carried forward at the same time. This research purports to study actual condition of current charterparty for tug-barge ship which are employed to marine construction and to suggest systematic improvement plan. For this purpose, this research focuses on studying cases in which dispute arose due to lack of clarity in the provisions of the contract with regard to which party bears the burden of liability in case of accident. This research also purports to suggest forming the standardised contract terms of the charterparty as one way of solution and examine matters to be attended in writing a standardised form.