• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2488-2498
• /
• 2021

The wall film-wise condensation plays an important role in the heat transfer processes of heat exchangers, refrigerators, and air conditioner. In the field of nuclear engineering, steam condensation is often utilized in safety systems to remove the core decay heat under both transient and accident conditions. In particular, passive containment cooling system (PCCS), are designed to ensure containment safety under severe accident conditions. A computational fluid dynamics (CFD) scale analysis has been conducted to calculate the heat transfer rate of the PCCS. However, despite the increase in computing power, there are challenges in the long-term transient simulation of containment using CFD scale codes. In this study, a heat structure coupling between the CFD and system analysis codes was performed to efficiently analyze PCCS. In addition, the component unstructured program for interfacial dynamics (CUPID) was improved to analyze the condensation behavior of ternary gas mixtures. Thereafter, the condensation heat transfer on the primary side was calculated using the improved CUPID and CFD code, whereas that on the secondary side was simulated using MARS. Both the coupled codes were validated against the CONAN facility database. Finally, conjugate heat transfer simulations with wall condensation in the presence of non-condensable gases were appropriately performed.

• Spatial Information Research
• /
• 제12권1호
• /
• pp.89-100
• /
• 2004

최근 급속한 도시의 팽창과 산업의 발전으로 인하여 가스시설이 급속히 확대됨에 따라 많은 도시가스업체에서는 가스관망 시설정보를 전산화하여 최신의 현황을 유지할 수 있는 가스시설물관리시스템을 개발하여 사용하고 있는 실정이다. 이러한 시스템에서는 가스시설물의 현황파악 및 유지관리를 위한 기본적인 정보만을 제공하고 가스 누출사고시 정확한 사태의 파악과 신속한 대책를 위한 제반 의사결정의 지원은 어려운 실정이다. 본 연구에서는 가스사고의 발생시 신속하고 체계적인 사고 대처를 위한 적용알고리즘의 정립을 통한 가스사고관리시스템을 구현하였다. 본 시스템에서는 1ㆍ2차 차단밸브의 산정을 통하여 가스 누출사고의 발생시 사고 관거의 파악과 함께 가스공급 중단 대상 관로의 파악과 밸브의 현황, 나아가 피해 수용가에 대한 현황 파악이 신속히 이루어 질 수 있도록 하였다. 이러한 가스사고관리시스템의 개발을 통하여 사고 발생시 신속한 대처방안을 고려하여 피해를 최소화 할 수 있다. 나아가 이러한 시스템의 활용을 통하여 가스업체의 업무 효율화에 기여하고 국민의 생명과 재산 보호에 기여도가 크리라 판단된다.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.235-243
• /
• 2019

원자력 사고 후 대기로 누출된 방사성물질이 지표 토양내 침적된 후 강우에 의하여 주변 환경으로 이동하여 지표수계를 오염시킨다. 지표 토양내 침적된 방사성핵종의 거동 평가를 위하여 수립된 지표 수계 및 토양 유실 모델의 주요 입력자료를 수집하여 분석하였다. 월성 원전이 위치한 낙동강권역의 하천과 호수에서의 물리적 특성과 주요 생물상의 변화를 파악하기 위해서 원전 주변 수생 환경의 조사 및 분석을 수행하였다. 이를 위해 국내 여러 기관에서 제공하는 수치지도, 수문자료, 수질 및 생태환경자료 등을 수집 분석하여 자료간 상호 연계성을 갖도록 체계적인 DB를 구축하였다. 구축된 수생환경 자료는 지표수계에 흡착된 방사성물질의 중장기 거동 평가를 위하여 수립된 지표수계 유동, 토사유실 및 생태계 모델의 기본 입력자료로 제공되어 종합적인 방사선영향평가에 활용될 예정이다.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.82-87
• /
• 2008

It is impossible to database(DB) the patterns of power cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of power cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to cracking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). From the results, The 22.9kV calss A power cable was discolored on the surface and significantly reduced in the longitudinal direction. As the thermal weight properties of A power cable was definitely varied, we are able to guess the problem of manufacture. If the cable was defect by the manufacture, the victims would be able to claim for damage in the PL system.

• 한국항공운항학회지
• /
• 제22권2호
• /
• pp.34-39
• /
• 2014

Airworthiness authorities specify the technical standards of airworthiness that propose minimum requirement of the commercial transport category and apply the rules in the certification process to ensure the safety of the aircraft. The Federal Aviation Administration and other national airworthiness authorities define the fatal accident risk levels for the safety assessment of the aircraft system and establish standard procedures to apply both qualitative and quantitative analysis techniques. However, an accident or incident may occur by the combination of various factors, although the aircraft is designed in accordance with the strict standards and approval by the Airworthiness Authorities. There are some key factors, such as human error, unpredictable complex system failures, degradation of the components reliability, improper maintenance task and intervals. Risk can be reduced by reflecting aircraft operational experience with similar types of aircraft in the process of aircraft development and safety assessment. Result of the root cause analysis for the Airbus A300-600 incident in which the aircraft engine reverser was deployed in the air have been introduced to reflect the design of system and related components. Also, this paper suggests to create a big-database in order to provide a feed-back to the FAR Part 25 transport category design and safety assessment of the operational experience.

• 한국항해항만학회지
• /
• 제33권9호
• /
• pp.609-614
• /
• 2009

The traffic of tug/barges which are carrying construction materials, large plants for harbor development, or offshore structures has recently increased in the coast of Korea. The west and south coast of Korea are always congested due to a lot of islands and traffic concentration. Specially tug/barges have higher probability of marine accidents due to their bad maneuverability than others. Considering the operational circumstance and maneuverability, this study was to develop a wide-area monitoring and control system for tug/barges in the coastal area of Korea. The system was made in the form of three program modules i.e. navigation analysis program module, monitoring and control program module, database module. And seven functions were programmed to monitor and control the tug/barges efficiently. These are ship information search, tug/barge information and track management, designated area and safe navigation zone management, fairway management, accident data management, warning of danger, safety information management.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.

• 항공우주정책ㆍ법학회지
• /
• 제25권2호
• /
• pp.113-137
• /
• 2010

국제 사회에서는 그 동안 항공안전의 향상을 위하여 많은 노력과 활동을 전개하여 왔다. 새로운 첨단기술과 시스템, 그리고 전 세계 어디서나 보다 정밀한 항행을 할 수 있도록 도와주는 항법장비의 발전은 항공안전의 수준을 상당히 향상시켜 왔다. 그러나 전 세계의 항공 사고율은 1980년대 이후부터 별다른 감소 추세 없이 계속해서 정체현상을 보이고 있다. 이는 기존의 항공안전 향상을 위한 노력만으로는 이제 더 이상 항공기의 안전 운항을 보장해 줄 충분한 수준의 안전 확보가 어렵다는 것을 의미하며, 결국 사고예방을 위한 새로운 방법이 필요하게 되었다. 이러한 점을 주목하여 전 세계 항공국들은 항공기 사고로 인명 또는 재산상의 손실이 발생하기 전에 전 항공시스템 내에서 초기 위험요소들을 사전에 인지하여 그에 대한 적절한 개선 대책을 개발할 수 있는 새로운 방식에 관심을 가지게 되었는데 그것은 항공안전정보시스템의 구축을 통한 안전정보의 수집 분석 공유를 하는 것이다. 세계적인 항공안전정보시스템을 구축하기 위해서는 각 나라의 정보들을 수집하고 분석할 수 있는 항공사고 준사고 보고시스템 구축을 기본으로 이용자간에 자유스럽게 교환이 이루어져야 한다. 또한 시스템을 구성하는 항공안전 데이터들의 분류체계가 표준화되어 이용자간의 정보가 원활히 소통될 수 있어야 하겠다. 이 연구에서는 항공안전 정보를 효과적으로 분석하고 필요한 예방활동을 결정할 수 있는 각 나라의 항공사고 준사고 데이터베이스 분류체계를 조사를 통하여 세계 항공안전 강화에 기여함은 물론 국가 항공 외교력 증진에도 도움이 되고자 한다.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.219-223
• /
• 2012

For an off-site consequence analysis at nuclear power plant, MELCOR Accident Consequence Code System(MACCS) II code is widely used as a software tool. In this study, the algorithm of web-based off-site consequence analysis program(OSCAP) using the MACCS II code was developed for an Integrated Leak Rate Test (ILRT) interval extension and Level 3 probabilistic safety assessment(PSA), and verification and validation(V&V) of the program was performed. The main input data for the MACCS II code are meteorological, population distribution and source term information. However, it requires lots of time and efforts to generate the main input data for an off-site consequence analysis using the MACCS II code. For example, the meteorological data are collected from each nuclear power site in real time, but the formats of the raw data collected are different from each site. To reduce the efforts and time for risk assessments, the web-based OSCAP has an automatic processing module which converts the format of the raw data collected from each site to the input data format of the MACCS II code. The program also provides an automatic function of converting the latest population data from Statistics Korea, the National Statistical Office, to the population distribution input data format of the MACCS II code. For the source term data, the program includes the release fraction of each source term category resulting from modular accident analysis program(MAAP) code analysis and the core inventory data from ORIGEN. These analysis results of each plant in Korea are stored in a database module of the web-based OSCAP, so the user can select the defaulted source term data of each plant without handling source term input data.

• 시스템엔지니어링학술지
• /
• 제18권2호
• /
• pp.75-93
• /
• 2022

Machine learning (ML) data-driven meta-model is proposed as a surrogate model to reduce the excessive computational cost of the physics-based model and facilitate the real-time prediction of a nuclear power plant's transient response. To forecast the transient response three machine learning (ML) meta-models based on recurrent neural networks (RNNs); specifically, Long Short Term Memory (LSTM), Gated Recurrent Unit (GRU), and a sequence combination of Convolutional Neural Network (CNN) and LSTM are developed. The chosen accident scenario is a control element assembly withdrawal at power concurrent with the Loss Of Offsite Power (LOOP). The transient response was obtained using the best estimate thermal hydraulics code, MARS-KS, and cross-validated against the Design and control document (DCD). DAKOTA software is loosely coupled with MARS-KS code via a python interface to perform the Best Estimate Plus Uncertainty Quantification (BEPU) analysis and generate a time series database of the system response to train, test and validate the ML meta-models. Key uncertain parameters identified as required by the CASU methodology were propagated using the non-parametric Monte-Carlo (MC) random propagation and Latin Hypercube Sampling technique until a statistically significant database (181 samples) as required by Wilk's fifth order is achieved with 95% probability and 95% confidence level. The three ML RNN models were built and optimized with the help of the Talos tool and demonstrated excellent performance in forecasting the most probable NPP transient response. This research was guided by the Systems Engineering (SE) approach for the systematic and efficient planning and execution of the research.