• 대한간호학회지
• /
• 제35권5호
• /
• pp.931-942
• /
• 2005

Purpose: The purpose of this study was to develop a meaning of life scale with high validity and reliability. Method: A conceptual framework composed of 4 phases of meanings of life was identified. And 49 preliminary items on a 4-points scale were developed through content validity. A reliability and validity test of the 49 items was conducted on 564 adults. By means of internal consistency of the 49 items, 1 item was deleted. To verify the 48 items, factor analysis, reliability test, and LISEREL were done. Result: Through exploratory factor analysis of the 48 items, 8 factors were extracted. These factors were labeled as 'self- awareness and self-acceptance', 'hope', 'responsibility awareness', 'love experience', 'self transcendence', 'relation experience', 'self contentedness', and 'Commitment'. Through LISEREL of the 48 items, 2 items were excluded and finally 46 itemsremained. Cronbach's Alpha of the 46 items was .94. The correlation coefficient of the Self-esteem scale was .79. Conclusion: By the above results, the researchers recommend the following: An exploratory study on the variables related to the meaning of life are needed for criterion validity of this scale. Studies on meaning of life of different groupa, and subjects are needed for reverification.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2011

The overall goal of a safety based railroad system is either to eliminate hazards in designing or to minimize the possibility of it. In order to indicate system safety or low risk although it may not be possible to achieve zero risk conditions, first, it shall ensure that any disasters would occur due to system operation because the prescribed specifications are properly fulfilled and there are no failures of any kind. Second, the risk of faults or failures leading to a mishap must be eliminated or minimized by using fault-tolerance or fail-safe procedures. This paper will attempt to summarize the personal and social risk criterion at widely scattered points, presently used as a safety approach in all over EU, in order to establish the step by step procedures of the detailed standard for railway facilities. In addition, we present the new safety analysis method using the SIL-based evaluation standard and the Reachability Graph of the Petri Net.

• 한국안전학회지
• /
• 제22권1호
• /
• pp.13-18
• /
• 2007

Structural integrity assessment of thin-walled pipes and pipe items has become one of the major issues in the nuclear power plant. ASME Section XI Code Case N-597-2 provides a criterion for acceptance of the pipes. But the code case has several limitations for application and sometimes gives too conservative or non-conservative results. So it is necessary to understand fully the technical bases of the code case. In the code case N-597, the allowable local thicknesses of thinned straight pipes are given for three different cases. Because of the different technical base, each case gives different thickness values and sometimes gives contradictory values. In this paper attempts were made in order to propose a unified rule for the allowable local thickness and in order to remove or relax the restrictions on the application of the code case. For this purpose elastic stress analyses were made using the finite element method and the stress results were examined. Based on the obtained bending stress results, a very simple procedure was proposed to obtain the consistent allowable local thickness for the thinned straight pipes.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.185-191
• /
• 2020

Plant-specific analyses of an advanced reactor have been performed to assure the structural integrity of the reactor pressure vessel during transient conditions, which are expected to initiate pressurized thermal shock (PTS) events. The vessel failure probabilities from the probabilistic fracture mechanics analyses are combined with the transient frequencies to generate the through-wall cracking frequencies, which are compared to the acceptance criterion. Several sensitivity analyses are performed, focusing on the orientations and sizes of cracks, the copper content, and a flaw distribution model. The results show that the integrity of the reactor vessel is expected to be maintained for long-term operation beyond the design lifetime from the PTS perspective using the design data of the advanced reactor. Moreover, a fluence level exceeding 9×10¹⁹ n/㎠ is found to be acceptable, generating a sufficient margin beyond the design lifetime.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.62-66
• /
• 2020

We fabricated superconducting quantum interference devices (SQUIDs) based on Nb Josephson junctions, and characterized the key parameters of the SQUIDs. The SQUIDs are double relaxation oscillation SQUIDs (DROSs) having larger flux-to-voltage transfer coefficient than the standard DC-SQUIDs. SQUID sensors were fabricated by using Nb junction technology consisted of a DC magnetron sputtering and a conventional photolithography process. In multichannel SQUID systems for whole-head magnetoencephalography measurement with a helmet-type SQUID array, we need about 336 SQUID sensors for each system. In this paper, we fabricated a few hundred SQUID sensors, measured the critical current, flux modulation voltage and decided if each tested SQUID can be used for the multichannel systems. As the criterion for the acceptance of the sensors, we chose the critical current and amplitude of the modulation voltage to be 8 ㎂ and 80 ㎶, respectively. The average critical current of the SQUIDs was 10.58 ㎂. The typical flux noise of the SQUIDs with input coil shorted was 2 μΦ0/√Hz at white region.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.89-102
• /
• 2021

Rapid construction of prefabricated bridges requires minimizing the field work of precast members and ensuring structural stability and constructability. In this study, we conducted experimental and analytical investigations of transverse joints of prefabricated T-girder bridge superstructures to verify the flexural performance and serviceability. In addition, we conducted parametric studies to identify the joint parameters. The results showed that both the segmented and continuous specimens satisfied the ultimate flexural strength criterion, and the segmented specimen exhibited unified behavior, with the flexural strength corresponding to that of the continuous specimen. The segmented specimens exhibited elastic behavior under service load conditions, and the maximum crack width satisfied the acceptance criteria. The reliability of the finite element model of the joint was verified, and parametric analysis of the convexity of the joint section and the compressive strength of the filler concrete showed that the minimum deflection and crack width occurred at a specific angle. As the strength of the filler concrete increased, the deflection and crack width decreased. However, we confirmed that the reduction in the crack width was hardly observed above a specific strength. Therefore, a design suitable for prefabricated bridges and accelerated construction can be achieved by improving the joint specifications based on the required criteria.

• Wind and Structures
• /
• 제32권4호
• /
• pp.283-292
• /
• 2021

Performance-based seismic design (PBSD) is currently used for retrofitting of older buildings and the design of new buildings. Whereas, application of performance-based design for wind load is still under development. The tendency has been in the codes to increase wind hazard based on recent recorded events. Since tall buildings are highly susceptible to wind load, necessity for developing a framework for performance-based wind design (PBWD) has intensified. Only a few guidelines such as ASCE (2019) provide information on using PBWD as an alternative for code prescriptive wind design. Though wind hazards, performance objectives, analysis techniques, and acceptance criteria are explained, no recommendations are provided for several aspects like how to select a proper level of wind hazard for each target performance criterion. This paper is an attempt to explain current design philosophy for wind and seismic loads and inherent connection between the components of PBSD for development of a framework for PBWD of tall buildings. Recognizing this connection, a framework for PBWD based on limits set for serviceability and strength is also proposed. Also, the potential for carrying out PBWD in line with ASCE 7-16 is investigated and proposed in this paper.

• 무역상무연구
• /
• 제38권
• /
• pp.3-45
• /
• 2008

A motive and aim of enactment of UN Convention on the Use of Electronic Communication in Int'l Contracts is based on need to eliminate legal obstacles that might arise under existing int'l trade law instruments and promote int'l electronic commercial transaction. But when it is used with related articles, 14, 15, 16, 17 for offer under CISG, one of the most successful conventions which produces substantive law for the unification of int'l trade, questions of practical importance, for example possibilities of withdrawal, revocation, rejection of offer, the extent of its criteria arise from therewith. In conclusion, a effective electronic offer has to assure easily access and confirmation of trade terms besides criteria of offer under CISG. An offer can be withdrawal, if electronic message of withdrawal has entered the offeree's server before or at the same time when the offer has reached the offeree but agreement expressly or impliedly, between the parties about type, format, email address is a prerequisited. Implied consent could be presumed through prior conduct or trade usages between the parties under CISG articles 8, 9. The term "have reached" correspond to the time which is able to retrieve the electronic message of withdrawal. But without express or implied agreement between them about electronic communication of type, format, email address, an offer can be withdrawal before or at the same time when it has entered offeree's other e-mail address and confirmed by his retrieval. In case of the revocation, electronic message of the revocation is effective before the offeree's dispatching an acceptance. A prerequisite for the revocation by electronic communication is came as the above mentioned withdrawal except for concept of a time difference for reach. In case of a rejection of offer, when a rejection by electronic communication has entered the offeror's server, an offer is ended. But a prerequisite for the rejection by electronic message is same as the above mentioned withdrawal and revocation.

• 인터넷정보학회논문지
• /
• 제6권6호
• /
• pp.99-106
• /
• 2005

멀티프로세서 시스템에서 스케줄링은 매우 중요한 부분이지만, 최적의 해를 구하는 것이 복잡하여 다양한 휴리스틱 방법들에 의한 스케줄링 알고리즘들이 제안되고 있다. 최근 유전 알고리즘을 사용한 멀티프로세서 스케줄링 알고리즘들이 제시되고 있지만, 제시된 알고리즘 대부분은 한가지만의 목적을 가지는 단순한 알고리즘이다. 본 논문에서는 유전 알고리즘을 이용한 새로운 스케줄링 알고리즘을 제시한다. 또한, 해를 구하는 과정에서 시뮬레이티드 어닐링 (simulated annealing)의 확률을 이용하여 유전 알고리즘의 성능을 개선시킨다. 제시된 알고리즘은 태스크들의 최종 수행 완료 시간 (makespan)을 최소화하는 것과 사용된 프로세서의 수를 최소화하는 두 가지의 목표를 가진다. 모의 실험을 통하여 제시된 알고리즘이 다른 알고리즘보다 최종 수행 완료 시간과 사용된 프로세서의 수에서 더 나은 결과를 보임을 확인할 수 있었다.

• 한국보건간호학회지
• /
• 제31권2호
• /
• pp.296-310
• /
• 2017

Purpose: The aim of this study was to develop and test the validity and reliability of the Korean version of the Pre-Menstrual Coping Measure (PMCM-K). Methods: Translation of the PMCM-K was validated using forward-backward translation methods. The study was conducted as a cross-sectional survey from March 7 to April 30, 2016 and the data from a total of 362 young adult women were used for the final analysis. The content validity, construct validity and criterion-related validity were evaluated. The internal consistency was calculated to assess the reliability. Results: The PMCM-K consisted of five factors: premenstrual coping regarding avoiding harm, awareness and acceptance of premenstrual change, self-care, communicating, and adjusting energy, which all explained 62.0% of the total variance in PMCM-K. The total score of the PMCM-K showed a positive correlation with the shortened premenstrual assessment form (r=.50). The Cronbach's alpha reliability coefficient was .94 for the overall instrument and .77-.93 for five factors. Conclusion: PMCM-K provides a valid and reliable scale for quantifying the ways of coping specific to a negative premenstrual change for Korean young adult women. The PMCM-K will play an important role as a way to gain a sense of agency in coping with premenstrual changes.