• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.365-369
• /
• 2006

It is concentrated on a methodology to establish a scheme of investment on power distribution systems of components. This paper provides a methodology to estimate the scheme as using a customer interruption cost regarding reliability indices in power distribution systems. The proposed method basically uses the failure rate depending on time for explaining the deterioration of a component. Therefore, the theory of the sensitivity is used for deciding the precedence of the investment to consider an effect of each component's failure rate on the system reliability. After Estimating the sensitivity on component investment cost making incremental reliability level is produced by component's investment cost accumulated according to the precedence of the sensitivity. After that, the failure rate corresponding with reliability level on the curve of investment cost is used as producing the curve of customer interruption cost. Two curves have the crossing point that is proposed to acceptable reliability level for customer and utility. In this paper, the acceptable reliability level for customer with the utility is assessed to analyze customer interruption cost and sensitivity of reliability indices. In conclusion the result of investment based on this method is shown to the reliability level with two cost.

• Industrial Engineering and Management Systems
• /
• 제9권1호
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• 동서간호학연구지
• /
• 제26권1호
• /
• pp.91-99
• /
• 2020

Purpose: The study aims to assess the inter-rater reliability of the Korean Triage and Acuity Scale between the research nurses and the triage nurses. Methods: Interrater reliability was measured on 400 adult (≧15) and 400 pediatric (<15) patients who visited the emergency medical center from January 4 to June 30, 2018. Results: The study result showed that the inter-rater reliability of the Korean Triage and Acuity Scale was substantial, with κ=.73 (95% Confidence interval= .68-.78) and 77.0 percent agreement. The inter-rater of Pediatric Korean Triage and Acuity Scale was also substantial, with κ=.76 (95% Confidence interval= .71-.82) and 83.8 percent agreement. Conclusion: Although the inter-rater reliability of the Korean Triage and Acuity Scale was acceptable, the percent agreement was lower than the desirable level (<80.0%). It was confirmed that Pediatric Korean Triage and Acuity Scale had an acceptable level of inter-rater reliability and percent agreement for clinical use. Efforts should be made to improve the reliability in the future.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권4호
• /
• pp.167-179
• /
• 2008

System risk is the totality of all safety risks to customers, employees, suppliers, and other third parties that arise due to system operations. To assess the risk of major hazards with the potential to cause fatality to the customers and other members of the public, quantitative risk assessment methodologies are used. This paper presents the general principles of risk based management approach to improve the safety of high risk systems such as aviation, railway, and nuclear power plants. For the suitable risk control arrangement, case studies of acceptable risk level, risk rating matrix, and safety management philosophy are presented.

• 대한통합의학회지
• /
• 제5권1호
• /
• pp.43-53
• /
• 2017

Purpose : To examine the relative absolute reliability and validity of step test (ST) scores in subjects with chronic stroke. Method : A total of 27 stroke patients, participated in the study. A relative reliability index (intraclass correlation coefficient, ICC) was used to examine the level of agreement of inter-rater test-retest reliability for ST score. Absolute reliability indices, including the standard error of measurement(SEM) and the minimal detectable change (MDC), and limits of agreement by Bland and Altman analysis. The validity was demonstrated by spearman correlation of ST score with 10 m Walk Test (10mWT), Fugl-Meyer Assessment-Lower/Extremity (FMA-L/E)-total score, Berg Balance Scale (BBS)-total score. Result : An excellent inter-rater reliability in ST scores was found (paretic, ICC=0.993~0.996; nonparetic, ICC=0.982~0.991). In addition, excellent test-retest reliability was found (paretic, ICC=0.992; nonparetic, ICC=0.967). It all showed acceptable SEM of the ST score as paretic and nonparetic were 0.22 and 0.46 respectively (average score <10 %), and the MDC of the paretic and nonparetic were 0.61 and 1.27 respectively (possible highest score <20 %). indicating that measures had a small and acceptable measurement error. The ST score of paretic and nonparetic were also found to be significantly associated with 10MWT (r=0.77~0.79), FMA-LE scores (r=0.73~0.81) and BBS scores (r=0.72~0.76). Conclusion : The ST showed highly sufficient Inter-rater test-retest agreement and validity and acceptable measurement errors caused by due to chance variation in measurement. It also can be used by clinicians and researchers to assess the balance and mobility performance and monitor functional change in chronic stroke patients.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.779-783
• /
• 2008

LRFD Resistance factors for static bearing capacity of driven steel pipe piles were calibrated in the freamework of reliability theory. Reliability analysis was performed by the First Order Reliability Method (FORM) using resistance bias factor statistics.The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, based on the reliability level of the current design practice and considering redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.463-469
• /
• 2001

An algorithm is presenter for generating the most probable states in decreasing order of probability of each unit. The proposed new algorithm in this note is compared with the existing methods regarding memory requirement and execution time. Our method is simpler and, judging from the computing experiment, it requires less memory size than the previously known methods and takes comparable execution time to previous methods for an acceptable level of criterion.

• Journal of Preventive Medicine and Public Health
• /
• 제38권1호
• /
• pp.61-70
• /
• 2005

Objectives : To develop a tool for multidimensional measurement of the quality of life, which was psychometrically sound, short, and easy to administer for patients with hypertension. Methods : A sample of 1,115 hypertensive patients aged 20 or above in Cheong-Song County was studied from June 1997 to October 1998. In the development of the instrumental stage, the authors first conceptualized the quality of life. Item generation, item reduction, and questionnaire formatting were followed. Item-level (item descriptive, missing%, item internal consistency, item discriminant validity) analysis, scale-level (scale descriptive, floor and ceiling effect) analysis, and other tests(Cronbach's alpha, inter-dimension correlations, factor analysis, clinical validity) were performed to evaluate the validity and reliability of the new measurement scale. After 1 year, responsiveness and confirmatory factor analysis were performed. Results : The results of both item-level and scale-level analyses were acceptable. An acceptable degree of internal consistency was observed for each of the dimensions (Cronbach's alpha was 0.60 or higher). Inter-dimension correlations were below 0.50 and the factor analysis result was the same as the intended dimension structure. Correlation coefficients between perceived health status, stress and dimensions were proven to be acceptable. The result of comparing dimensional score means among ADL and MMSE-K groups above 60 years was statistically significant(p<0.05). The result of confirmatory factor analysis concluded that the dimensional structure model was well fitted. However, the result of responsiveness test using sensitivity and specificity was unsatisfactory. Conclusions : The newly developed measurement scale is psychometrically reliable and valid instrument for measuring quality of life in hypertensive patients.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.879-888
• /
• 2018

Probability-based design codes have been developed to sufficiently confirm the safety level of structures. One of the most acceptable probability-based approaches is Load Resistance Factor Design (LRFD), which measures the safety level of the structures in terms of the reliability index. The main contribution of this paper is to calibrate the load and resistance factors of the design code for tunnels. The load and resistance factors are calculated using the available statistical models and probability-based procedures. The major steps include selection of representative structures, consideration of the limit state functions, calculation of reliability for the selected structures, selection of the target reliability index and calculation of load factors and resistance factors. The load and resistance models are reviewed. Statistical models of resistance (load carrying capacity) are summarized for strength limit state in bending, shear and compression. The reliability indices are calculated for several segments of a selected circular tunnel designed according to the tunnel manual report (Tunnel Manual). The novelty of this paper is the selection of the target reliability. In doing so, the uniform spectrum of reliability indices is proposed based on the probability paper. The final recommendation is proposed based on the closeness to the target reliability index.