• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.169-176
• /
• 2005

This paper introduces the dynamic control of acceleration lanes at freeway-ramp junctions. The feasibility of operation with flexible length of acceleration lane was tested with most possible traffic conditions. The operational qualify was also evaluated using average speed and total thru-put at both ramp section and freeway section. A CORSIM microscopic simulation model was used to evaluate the operation quality with a variety or volume conditions and three acceleration lanes, each representing different length categories. In addition, tollgate O-D data including travel times were obtained for two sections on the Gyeong-bu Freeway where an effective merging distance has been largely reduced. Its effect was analyzed and compared to the simulation results. Finally, the effects of acceleration lane are discussed and operational improvement at junctions is presented as research findings.

• International Journal of Automotive Technology
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2004

This paper evaluates the effectiveness of four-wheel-steering system from the viewpoint of lane-keeping control theory. In this paper, the lane-keeping control system is designed on the basis of the four-wheel-steering automobiles whose desired steering response is realized with the application of model matching control. Two types of desired steering responses are presented in this paper. One is zero-sideslip response, the other one is steering response which realizes zero-phase-delay of lateral acceleration. Using simplified linear two degree-of-freedom bicycle model, simulation study and theoretical analysis are conducted to evaluate the lane-keeping control performance of active four-wheel-steering automobiles which have different desired steering responses. Finally, the evaluation is conducted on straight and curved roadway tracking maneuvers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.230-237
• /
• 2004

Lane Sensing techniques based on vision sensors are regarded promising because they require little infrastructure on the highway except clear lane markers. However, they require more intelligent processing algorithms in vehicles to generate the previewed roadway from the vision images. In this paper, a lane sensing algorithm using vision sensors is developed to improve the sensing robustness. The parallel stereo-camera is utilized to regenerate the 3-dimensional road geometry. The lane geometry models are derived such that their parameters represent the road curvature, lateral offset and heading angle, respectively. The parameters of the lane geometry models are estimated by the Kalman filter and utilized to reconstruct the lane geometry in the global coordinate. The inverse perspective mapping from the image plane to the global coordinate considers roll and pitch motions of a vehicle so that the mapping error is minimized during acceleration, braking or steering. The proposed sensing system has been built and implemented on a 1/10-scale model car.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.197-204
• /
• 2003

This paper develops a computer model for estimating the handling of a cabover type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using ADAMS. A shock absorber, a rubber bush, and a leaf spring aunt a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC/PATRAN. A mode analysis is performed with the frame model using MSC/NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double lane change test is performed with an actual vehicle. In the double lane change, lateral acceleration, yaw rate, and roll angle are measured. Those test results are compared with the simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.81-86
• /
• 2013

This paper presents the lane change system for collision avoidance. The proposed algorithm for the collision avoidance consists of path generation and path following. Using a calculated TTC (Time to Collision), partial braking is operated and collision avoidance path is generated considering relative distance, velocity and acceleration. Based on the collision avoidance path, desired yaw angle and yaw rate are calculated for the automated path following. The lateral controller is designed by a Lyapunov function approach using 3 D.O.F vehicle model and vehicle parameters. The required steering angle is determined from wheel velocity, longitudinal and lateral velocity in order to follow the desired yaw angle and yaw rate. This system is developed MATLAB/Simulink and its performance is evaluated using the commercial software CarSim.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.17-17
• /
• 2000

In this paper, we design a hybrid controller for a safe lane change maneuver in automated highway systems(AHS). The proposed hybrid controller consists of a supervisor which controls the behaviors of discrete-event dynamic systems, and a regulator which controls the operations of continuous-variable dynamic systems. The supervisor determines whether the system starts a maneuver or not, via a condition for a safety, and gives orders to the regulator for performing the maneuvers. And the regulator tracks the planned path generated in the supervisor. The conditions for a safe lane change maneuver are proposed using the velocity, the acceleration, and geometrical relationship of vehicles.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.763-772
• /
• 2007

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.62-73
• /
• 2020

Access management is aimed at preserving the road's high intercity mobility. In urbanized areas, immoderate acceleration lane-length requirements restrict the accessibility of land. Therefore, there are many opinions to revise the minimum acceleration lane-length requirement. For this purpose, it is important to diagnose the effects of slow vehicles on the mainline. This study analyzed a single merging vehicle's total delay occurrence depending on the mainline traffic flow rate and merging speed. A linear relationship was observed between the mainline traffic flow rate and total delay. As a merging speed increases gradually from 40km/h to 100km/h in 20km/h intervals, the total delay decreases by 5.0, 1.6, and 5.1 times, respectively. This shows that the ideal condition with the total delay is less than 0.5 vehicle·sec when there is no speed difference between the mainline and merging vehicle. On the other hand, given the one-second response time of drivers, the total delay occurrence was slightly low when the speed difference between the mainline and merging vehicle was less than 20km/h.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.103-111
• /
• 2013

PURPOSES : Previous Speed Profile reflects the patterns of speeds in sections of tangents to curves in the roads. However these patterns are uniform of speeds and Acceleration/Deceleration. In oder to supplement these shortcomings. this study made a new profile which can contain factors of Acceleration/Deceleration through theories of Previous Speed Profiles. METHODS : For sakes, this study developed the speed prediction model of Rural Multi-Lane Highways and calculated Acceleration/Deceleration by appling a Polynomial model based on developed speed prediction model. Polynomial model is based on second by second. Acceleration/Deceleration Profile is developed with the various scenarios of road geometric conditions. RESULTS : The longer an ahead tangent length is, The higher an acceleration rate in curve occurs due to wide sight distance. However when there are big speed gaps between two curves, the longer tangent length alleviate acceleration rate. CONCLUSIONS : Acceleration/Deceleration Profile can overview th patterns of speeds and Accelerations/Decelerations in the various road geometric conditions. Also this result will help road designer have a proper guidance to exam a potential geometric conditions where may occur the acceleration/deceleration states.