• 제목/요약/키워드: Acceleration and Deceleration

검색결과 382건 처리시간 0.03초

관성센서를 이용한 여자핸드볼 선수들의 포지션별 움직임 분석 (Movement Analysis of Women's Handball Players by Position using Inertial Measurement Units)

  • 박종철;윤경신;김지응
    • 한국융합학회논문지
    • /
    • 제11권4호
    • /
    • pp.343-350
    • /
    • 2020
  • 본 연구는 여자 핸드볼 국가대표 선수를 대상으로 관성센서(IMU)를 활용하여 5개월 동안 국내 또는 국외 연습경기 총 16경기를 대상으로 움직임을 정량화하고 훈련의 효율성과 포지션별 움직임 차이를 확인하고자 하였다. 골키퍼를 제외한 15명의 필드플레이어를 대상으로 하였으며 연구결과 다음과 같은 결론을 얻었다. 플레이어로드는 Wing > Back > Pivot 순으로 나타났고 국외경기에서 높은 것으로 나타났다. 좌·우 방향전환은 Pivot이 저강도에서 가장 많은 것으로 나타났고 중·고강도는 Back에서 가장 많이 나타났다. 국외경기의 저·중강도 방향전환 움직임이 많은 것으로 나타났다. 저강도 가속과 감속은 Pivot이 가장 많은 것으로 나타났고 중·고강도 가속과 감속은 Back이 가장 많은 것으로 나타났다. 국외경기에서 저·중강도 가속과 저·중·고강도 감속이 많은 것으로 나타났다. 점프는 Back이 중강도, Wing이 고강도 점프가 많이 나타났지만 경기 유형간 차이는 나타나지 않았다.

연석의 실물차량 충돌시험 데이터를 이용한 주행안전성 평가에 관한 연구 (A Study on Driving Safety Evaluations Using Full Scale Crash Test Data of Curb)

  • 김종민;노관섭;김장욱;변지석
    • 한국안전학회지
    • /
    • 제27권2호
    • /
    • pp.98-104
    • /
    • 2012
  • Current [Guideline for Installation and Management of Sidewalks and Safety Facilities on Roads] suggests that the types of curbs should be Barrier curb ($85^{\circ}$). Although Barrier curbs ($90^{\circ}$) were not specified in the guideline. The curbs installed on the roads currently are Barrier curbs ($90^{\circ}$) which are not specified in the installation standard. Therefore, it is critical to prepare for the installation standard of curbs by researching types of curbs and driving safety. This research have assessed the driving safety throughout Full Scale Crash Test according to type of curbs (Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$)). Barrier curbs ($90^{\circ}$) showed higher figure in Theoretical head Impact Velocity, Post-impact Head Deceleration, Vehicle Damage when Crash, Passenger's Wounds Severity, and every other items than Barrier curbs ($85^{\circ}$). Barrier curbs ($85^{\circ}$) were found to have better Occupant Safety Index. Analysis of Behavior Using Full-Scale Crash Test showed difference depending on the Impact Condition between Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$). Generally, Barrier curbs ($85^{\circ}$) were superior than Barrier curbs ($90^{\circ}$) in terms of protecting the passengers and vehicle damages. When an impact angle increases, Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs, two types of curb showed similarity. However, if an impact of an angle decreases, Barrier Curbs ($85^{\circ}$) showed excellence in Driving Safety such as Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs.

VR 시나리오를 이용한 음주운전자 운전 특성의 유의성 및 상관분석에 관한 연구 (A Study on the Significance and Relationship Drunken Drivers Characteristics Using Virtual Reality Scenario)

  • 김명수;박상진
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.165-177
    • /
    • 2012
  • PURPOSES: The number of traffic accidents in 2010 was 226,978 in Korea, a high percentage of which up to 12.61% was due to drunk driving. As it is expected that the number of traffic accidents will increase because of the drastic increase of the number of vehicle registrations and the prevalent drinking cultures, it is necessary to understand the driving characteristics of drunken drivers to lower the increasing rate. METHODS: This study, therefore, comparatively analyzes the two groups - one group before drinking and the other after drinking - based on the graph, and implements the correlation in each scenario(1,2,3). scenario 1. appearance of jaywalkers; scenario 2. appearance of an illegal left-turning car; and scenario 3. appearance of a vehicle and a person as obstacles to the driver after an accident. RESULTS: The comparative analysis of speed shows that the group after drinking was 50km/h faster than the group before drinking in Scenario 1, 20km/h in Scenario 2, and 15km/h in Scenario 3 respectively. In the comparative analysis of acceleration, the average level of the group after drinking was 0.15 higher than that of the group before drinking in Scenario 1, 0.30 in Scenario 2, and 0.15 in Scenario 3. In the comparative analysis of deceleration, the average level of the group after drinking was about 0.4 lower than that of the group before drinking in Scenario 1, 0.35 in Scenario 2, and 0.2 in Scenario 3 respectively. In the comparative analyses, the item of speed, acceleration and deceleration was of significance for each group in Scenarios. CONCLUSIONS: The comparative analysis demonstrated that there is a difference between the group before drinking and the group after drinking. In the analysis of correlation in each group, it was proved that the drunken group was of significance.

교통섬 설치로 인한 교통사고 감소 효과 (Effects of Traffic Islands on Traffic Accidents Reduction)

  • 강동수;이수범;김용석;홍지연
    • 대한교통학회지
    • /
    • 제28권2호
    • /
    • pp.21-32
    • /
    • 2010
  • 교통섬으로 대표되는 도류화 시설은 교통소통과 안전에 크게 기여하면서 신규 도로설계와 교통사고잦은곳 개선사업과 같은 교통안전대책사업에 광범위하게 적용되고 있으나, 다양한 도로환경 조건에서 교통섬 설치로 인한 교통사고 감소효과 등은 구체적으로 제시되지 못하고 있는 실정이다. 이에 본 연구에서는 전국 54개 교차로를 대상으로 공사 전 후 각 3년간의 교통사고자료와 도로환경 자료를 이용하여 정규성 검정과 대응표본 t-검정, 윌콕슨 부호검정을 실시하여 다양한 도로 환경조건에서 교통섬 설치로 인한 교통사고 감소 효과와 경제성 분석을 실시하였다. 교통섬 설치 이후 대부분의 경우 교통사고가 감소하였으나 교통섬의 이용효율이 낮은 시외곽/농업지역과 운전자의 전방 교차로와 교통섬에 대한 시인성이 불량한 곡선부나 교차로 접근부와 유출부의 도로선형이 꺽인구간, 교통섬 설치시 가감속차로가 병행 설치되지 않아 분 합류되는 교차로간상충이 있는 경우 및 부도로 차로수가 1차로인 경우에는 교통섬의 잇점을 충분히 살리지 못해 교통사고감소에 미치는 영향이 미미한 것으로 분석되었다.

i80486과 32비트 DSP를 사용한 CNC 제어기의 개발 (Development of CNC controller based on i80486 and 32bit DSP chip)

  • 김동일;송진일;김성권;이충환;이윤석;강문;나상근;임용규;남기준
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.537-540
    • /
    • 1992
  • This paper presents Samsung CNC (Computer Numerical Controller) system with an intel 80486/487 as the main CPU and a 32 bit floating point DSP(Digital Signal Processor) TMS320C30 as the motion control CPU. The Samsung CNC system diverse user-frienly characteristics such as multi-tasking, powerful menu system, internal PLC system, and 2/3 dimensional graphics in wire and solid mode. The main CPU executes central processing program, user interface program, interpreter, BMI, etc while the motion control CPU carries out some interpolations, acceleration/deceleration, and PID control algorithm with feedforward terms. Complex interpolations except linear and circular ones are performed on the main control CPU. The experimental results for the circular interpolation under linear acceleration/deceleration shows that the proposed CNC system can be widely used in controlling machining centers with good machining accuracy.

  • PDF

무인 항공기 터보 제트 엔진의 서지와 회전 속도 제어 (Surge and Rotating Speed Control for Unmanned Aircraft Turbo-jet Engine)

  • 지민석;홍교영;이강웅
    • 한국항행학회논문지
    • /
    • 제10권4호
    • /
    • pp.319-326
    • /
    • 2006
  • 본 논문에서는 연료 유량만을 제어 입력으로 하는 터보제트 엔진 제어기를 제안한다. 퍼지 기반 제어기는 무인 항공기의 가감속시 서지와 flame-out 현상이 발생되지 않도록 효율적으로 제어 입력을 생성하며, 항공기 기동시 빠른 가감속 특성을 보이며, 동작점이 서지라인과 flame-out라인 사이에 존재하도록 설계되었다. 엔진 회전 속도와 서지 여유가 퍼지 입력 변수가 되고, 신속하고 안전하게 항공기가 원하는 회전속도로 수렴할 수 있도록 제어기를 설계한다. 제안된 제어기의 성능확인을 위해 MATLAB을 사용한 컴퓨터 시뮬레이션을 수행하였으며, DYGABCD 프로그램을 사용하여 생성된 선형 엔진 모델에 적용하여 성능을 입증하였다.

  • PDF

차량간 안전거리를 고려한 차로변경 모형개발 (Development of Lane Changing Model with regard to Safety Distance of Vehicles)

  • 최지은;류병용;배상훈;강승필
    • 대한교통학회지
    • /
    • 제27권6호
    • /
    • pp.109-118
    • /
    • 2009
  • 90년대 교통 시설의 이용효율성 및 안전을 제고하고자 ITS가 도입되었다. 최근 정보통신기술의 발달로 인해 첨단차량 및 도로에 대한 관심이 급증하고 있다. 차량제어모형 중 차로변경모형은 중요한 요소이지만 기존의 연구에서는 대상차량이 등속주행 상황에서 차로변경 여부를 판단하므로 실제적용에 한계성을 가진다. 따라서 본 연구에서는 차로변경 시 대상차량의 가감속을 통해 주위차량 간 안전성을 판단하여 차로변경을 수행하였다. 본 연구에서 개발된 차로변경모형의 적합성을 검증하고자 시나리오별 시뮬레이션을 수행하였다. 수행 결과, 목표차로의 선행차량을 추월하여 현차로의 선행차량과의 차간거리가 안전거리 이상이면 차로변경을 하였다. 또한, 현차로의 선행차량과의 차간거리가 안전거리 이하이면 목표차로의 선행차량, 후행차량과의 차간거리를 고려하여 차로변경을 적절히 수행하는 것으로 나타났다. 이러한 차로변경 모형은 안전주행 지원시스템, 자동운행시스템에 활용되어 첨단차량 및 첨단도로 시스템 분야 발전에 기여할 것으로 사료된다.

주행조건에 따른 판형교 지점부 거동 측정 분석 (Measurement and Analysis about Behavior of Steel Plate Girder in Vicinity of Support, According to Driving Condition)

  • 이승열;김남홍;우병구;나강운
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.690-696
    • /
    • 2011
  • A number of conventional railway bridge is more than 2600. Non-ballast plate girder bridge is about 700 and this is 27% of all bridge numbers. Non-ballast plate girder has advantages that self load is more lighter than moving load and construction cost is more inexpensive than concrete bridge. But non-ballast plate girder has disadvantages that vibration and noise is bigger than concrete bridge. This study had analyzed behavior of non-ballast plate girder according to the arrangement of supports and driving conditions to review the proper arrangement of support. Measurements were performed in single line and disel locomotive of 7400type were used as test vehicle. The vehicle's driving conditions are as follows; Change of driving direction, Constant speed driving, Deceleration driving, Acceleration driving. Main measurement contents were horizontal displacement and vertical vibration acceleration in girder of vicinity support. Results of measurement are as follows; In case that a vehicle drives from fixed support to movable support, vertical vibration acceleration of the girder was smaller than opposition case.

  • PDF

액체 슬로싱 제어를 위한 입력성형 (Input Shaping for Control of Liquid Sloshing)

  • 김동주;홍성욱;김경진
    • 한국정밀공학회지
    • /
    • 제28권9호
    • /
    • pp.1018-1024
    • /
    • 2011
  • Liquid sloshing occurs when a partially filled liquid tank is subjected to undesirable external forces or acceleration/deceleration for positioning control. Installation of baffles is still the most popular way to suppress the sloshing, but recent successes of input shaping in reducing structural vibrations may give a possible alternative. We aim at investigating the applicability of input shaping to sloshing suppression by numerically solving fluid motions in a rectangular tank. The tank is partially filled with water and it is suddenly put into a sequence of horizontal motions of acceleration and constant speed. The flow is assumed to be two-dimensional, incompressible, and in viscid, and a VOF two-phase model is used to capture the free surface. Results show that the sloshing can be successfully suppressed by shaping the input, i.e., the velocity or acceleration profile of tank. Three different input shapers (ZII, ZVD, and two-mode convolved ZV shapers) are tested and compared in this study Among them, the convolved ZV shaper shows a best performance to eliminate the sloshing almost completely.

차량기술, 연료 유종 및 시험모드 특성에 따른 온실가스의 배출특성 연구 (A study on the emission characteristics of greenhouse gases according to the vehicle technology, fuel oil type and test mode)

  • 이정천;이민호;김기호;박언영
    • 한국응용과학기술학회지
    • /
    • 제34권4호
    • /
    • pp.962-973
    • /
    • 2017
  • 대기오염에 대한 관심은 국내 외에서 점진적으로 상승하고 있으며, 자동차 및 연료 연구자들은 청정(친환경 대체연료) 연료와 연료품질 향상 등을 이용하여 새로운 엔진 설계, 혁신적인 후처리 시스템 등의 연구를 통하여 차량 배기가스 및 온실가스를 감소시키고자 노력하고 있다. 이에 본 연구에서는 각기 다른 차량기술이 적용된 휘발유, 경유, LPG를 연료로 사용하는 7대의 차량을 대상으로 국내 외에서 법적시험모드로 사용되고 있는 도심모드, 고속모드, 급가 감속, 에어컨사용 및 겨울철 특성을 반영한 저온모드에서 온실가스의 배출특성을 확인하고자 하였다. 사용연료에 관계없이 대부분의 온실가스는 저온인 Cold FTP-75 모드에서 가장 안 좋은 결과가 나타나는 경향을 가지고 있다. 각 차량별 온실가스 증가 요인으로는 가솔린 차량인 A차량(2.0 MPI)과 B차량(2.4 GDI)에서는 최고속 및 급가 감속, 에어컨 사용, 저온 조건의 순인데 비해 E차량(1.6 T-GDI)은 에어컨 사용, 최고속 및 급가 감속, 저온 조건의 순이다. G차량(LPLi)은 에어컨 사용, 저온, 최고속 및 급가 감속 조건의 순으로 가솔린 차량과 다른 특성을 가지고 있다. 경유 차량에 있어서는 A차량(2.0 w/o DPF)과 B차량(2.2 w/ DPF)은 최고속 및 급가 감속, 에어컨 사용, 저온 조건의 순이었고, F차량(1.6 w/ DPF)은 저온, 에어컨 사용, 최고속 및 급가 감속 조건의 순으로 확인되었다. 따라서, 각 연료별로 배출가스 저감 기술을 다르게 적용하여야 효과적인 방법이라고 할 수 있겠다.