• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권12호
• /
• pp.609-615
• /
• 2005

A 30kW electrical power conversion system is developed for a variable speed wind turbine. In the wind energy conversion system(WECS) a synchronous generator with field current excitation converts the mechanical energy into electrical energy. As the voltage and the frequency of the generator output vary according to the wind speed, a 6-bridge diode rectifier and a PWM boost chopper is utilized as an ac-dc converter maintaining the constant dc-link voltage with only single switch control. An input current control algorithm for maximum power generation during the variable speed operation is proposed without any usage of speed sensor. Grid connection type PWM inverter converts dc input power to ac output currents into the grid. The active power to the grid is controlled by q-axis current and the reactive power is controlled by d-axis current with appropriate decoupling. The phase angle of utility voltage is detected using software PLL(Phased Locked Loop) in d-q synchronous reference frame. Experimental results from the test of 30kW prototype wind turbine system show that the generator power can be controlled effectively during the variable speed operation without any speed sensor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.267-269
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.124-131
• /
• 2009

This paper presents a PWM dc-ac converter regulation using a Single Input Fuzzy PI Controller (SIFPIC). The SIFPIC is derived from the signed distanced method, which is a simplification of a conventional fuzzy controller. The simplification results in a one-dimensional rule table, that allows its control surface to be approximated by a piecewise linear relationship. The controller multi-loop structure is comprised of an outer voltage and an inner current feedback loop. To verify the performance of the SIFPIC, a low power PWM dc-ac converter prototype is constructed and the proposed control algorithm is implemented. The experimental results show that the SIFPIC performance is comparable to a conventional Fuzzy PI controller, but with a much reduced computation time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권1호
• /
• pp.43-50
• /
• 1995

This study was carried out to investigate the effects of activated carbon (AC) on growth, ruminal charateristics, blood profiles and feed digestibility in sheep, using roughage-based or concentrate-based diets. Twelve Suffolk breed of sheep of similar age and weight were distributed into 4 groups in a $2{\times}2$ factorial design. Two groups were fed a roughage-based diet with (R + AC) and without AC (R - AC), while the other two were fed a concentrate-based diet with (C + AC) and without AC (C - AC), respectively. The addition of 0.3% AC was based on dry matter of feed offered to animals. The incorporation of AC in roughage and concentrate based diets had no marked effects on feed intake, daily gain and feed conversion of the animals within experimental diets. The results obtained might be due to the low level of AC added in the diet. The animal on both concentrate-based diets were higher than the roughage-based diets in terms of daily gain and feed conversion ratio. However, it was observed that the animals provided with AC in the concentrate-based diet did not suffer from diarrhea and easily adjusted to high concentrate feeding. Further, the pH value for all diets before feeding was noted to be similar. After feeding, however, pH was shown to be higher in R + AC (p < 0.05) than in C + AC diet. Rumen protozoa number was decreased after feeding for both + AC diets, but in C - AC diet it was higher than in the roughage-based diets. For ammonia-nitrogen, C - AC was found to be higher than C + AC diet and the roughage-based diets before feeding. Total volatile fatty acid concentration, propionate and valerate molar ratios for both diets and time of collection were not affected. However, acetate, butyrate and valerate molar ratios were observed to be affected by diets and time of collections. The diets with AC increased (p < 0.05) before feeding for acetate molar ratio, but not different within diet, however, the roughage diets were found to be higher (p < 0.05) in acetate than the concentrate diet. In the blood parameters, the glutamic pyruvic transaminase (GPT), red and white blood cell (RBC, WBC) counts and packed cell volume (PCV) did not differ within and among the diets. Likewise, the WBC differential count in both diets with either - AC or + AC were similar in trend. However, lymphocyte count was noted to be increased in R + AC than the R - AC diet. The addition of AC in both diets did not affect nutrient digestibilities within diets.

• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.72-75
• /
• 2012

본 논문에서는 무선전력전송을 위한 고효율 DC-AC 변환 회로를 구현하였다. DC-AC 변환 회로는 발진기와 전력증폭기를 결합시켜 구현하였다. 전력증폭기의 전력 효율은 무선전력전송 송신 시스템의 효율에 크게 영향을 주기 때문에 Class-E 증폭구조를 이용하여 고효율 전력증폭기를 구현하였다. 또한, 전력증폭기의 입력 단에 연결되는 발진기의 출력 전력이 작기 때문에 높은 출력의 DC-AC 변환 회로를 구현하기 위하여 구동 증폭기를 이용한 고이득 이단 전력증폭기를 구현하였다. 고이득 고효율 이단 Class-E 전력증폭기의 입력 단에 발진기를 연결하여 고효율 DC-AC 변환 회로를 구현하였다. 13.56MHz의 2차, 3차 고조파 성분을 억제하기 위해 이중대역 저지 필터를 설계하여 결합하였다. DC-AC 변환 회로의 출력 전력과 변환 효율은 13.56 MHz에서 40 dBm과 80.2 %이다.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.797-801
• /
• 1998

Diglycidy1 ether of bisphenol A (DEGBA)/4, 4'-methylene dianiline(MDA) 계의 반응속도에 미치는 10 phr의 pheny1 glycidy1 ether(PGE)-acetamide(AcAm)의 영향을 살펴보았다. PGE-AcAm이 첨가됨으로 인해서 승온적 DSC 곡선에서 최대 발열피크의 온도와 피크 시작 온도가 감소하였다. PGE-AcAm의 첨가 여부에 관계없이 전화율 곡선은 s-자 형상이었고, 이는 DGEBA/MDA 계와 DGEBA/MDA/PGE-AcAm 계가 자촉대 반응을 한다는 것을 의미한다. 또한 PGE-AcAm이 10 phr 첨가됨으로 인해서 1.2-1.4배 증가하였는데, 이는 PGE-AcAm의 수산기가 촉매로 작용하기 때문이다.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.249-256
• /
• 2014

A novel topology generation method for the no dead-time three-phase AC/DC converter is proposed in this study. With this method, a series of no dead time topologies are generated and their operation principles are analyzed. The classic three-phase bridge AC/DC converter can realize a bidirectional operation. However, dead-time should be inserted in the driving signals to avoid the shoot-through problem, which would cause additional harmonics. Compared with the bridge topology, the proposed topologies lack the shoot-through problem. Thus, dead time can be avoided. All of the no dead time three-phase AC/DC converters can realize bidirectional operation. The operating principles of the converters are analyzed in detail, and the corresponding control strategies are discussed. Comparisons of waveform distortion and efficiency among the converters are provided. Finally, 9 KW DSP-based principle prototypes are established and tested. Simulation and experimental results verify the theoretical analysis.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.19-27
• /
• 2007

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost H-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switch mode equivalent circuits and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft-switching(ZVS) operation ranges, and the power dissipation as compared with those of the conventional type high frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation(PWM) and pulse density modulation(PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.313-319
• /
• 2014

This study was performed to obtain high conversion efficiency of $NH_3$ and minimize generation of nitrogen oxides using metal-supported catalyst with Ag : Cu ratio. Through structural analysis of the prepared catalyst with Ag : Cu ratio ((10-x)Ag-xCu ($0{\leq}x{\leq}6$)), it was confirmed that the specific surface area was decrease with increasing metal content. A prepared catalysts showed Type II adsorption isotherms regardless of the ratio Ag : Cu of metal content, and crystalline phase of $Ag_2O$, CuO and $CuAl_2O$ was observed by XRD analysis. In the low temperature($150{\sim}200^{\circ}C$), a conversion efficiency of AC_10 recorded the highest(98%), whereas AC_5 (Ag : Cu = 5 : 5) also showed good conversion efficiency(93.8%). However, in the high temperature range, the amounts of by-products(NO, $NO_2$) formed with AC_5 was lower than that of AC_10. From these results, It is concluded that AC_5 is more environmentally and economically suitable.