• Rapid Communication in Photoscience
• /
• 제1권1호
• /
• pp.13-15
• /
• 2012

New porous $TiO_2$ nanostructures with shapes of pearl and rice were synthesized by hydrothermal treatment of $TiO_2$-liposome nanocomposites in acid and base solutions, respectively, as identified by scanning electron microscopy (SEM), transmission electron microscopy (TEM) images and large Brunauer-Emmett-Teller (BET) surface areas. The x-ray diffraction (XRD) patterns and selected area electron diffraction proved them to be well-defined anatase crystals. Their UV-visible reflectance absorption spectra were observed to have low band gap energy (3.03 and 3.07 eV, respectively), exhibiting surface absorption band in the visible range from 400 to 600 nm. The degradation of methylene blue (MB) over the $TiO_2$ nanostructures was observed upon visible-light irradiation, which was found to be very efficient as compared with any other conventional visible-light responsive $TiO_2$ nanostructures.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.307-316
• /
• 2014

Improved power conversion efficiency of hybrid solar cells with ITO/ZnO seed layer/ZnO NRs/ZnS QDs/P3HT/PCBM/Ag structure was obtained by optimizing the growth period of ZnO nanorods (NRs). ZnO NRs were grown using a hydrothermal method on ZnO seed layers, while ZnS quantum dots (QDs) (average thickness about 24 nm) were fabricated on the ZnO NRs by the successive ionic layer adsorption and reaction (SILAR) technique. Morphology, crystalline structure and optical absorption of layers were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and UV-Visible absorption spectra, respectively. The XRD results implied that ZnS QDs were in the cubic phase (sphalerite). Other experimental results showed that the maximum power conversion efficiency of 4.09% was obtained for a device based on ZnO NR10 under an illumination of one Sun (AM 1.5G, $100mW/cm^2$).

• 마이크로전자및패키징학회지
• /
• 제8권4호
• /
• pp.43-45
• /
• 2001

본 연구는 레이저 처리기술에 의한 $Li_2O-A1_2O_3-SiO_2$계 유리의 미세가공과 레이저에 의한 유리의 광활성반응에 관한 것으로서, 1064 nm와 355 nm의 파장을 갖는 Nd:YAG laser를 유리에 조사하여 유리의 파괴특성 및 광학적변화를 관찰하였다. 1064 nm레이저에 의한 유리의 파괴 부분은 광학현미경과 주사전자현미경 (SEM)으로서 파괴특성을 평가하였으며, 355 nm 레이저에 의한 유리의 변화는 흡수대역은 측정함으로서 그 광학적 특성을 나타내었다. 이와 같은 레이저에 의한 가공은 유리내부의 3차원적인 미세구조물 형성이나, internal waveguide, 또는 광 흡수대역의 변화에 따른 광기록방법으로 응용될 것으로 예상된다.

• Current Photovoltaic Research
• /
• 제3권3호
• /
• pp.71-74
• /
• 2015

Soluble polyaniline was synthesized by attaching titanium isoproxide ($Ti(OPr)_4$) to the amine group of the aniline. Approximately 1 to 1 molar ratio of aniline and $Ti(OPr)_4$ was mixed and polymerized with ammonium persulfate. The FTIR result showed clear difference between $TiO_2$-aniline composite ($TiO_2An$) and $TiO_2$-polyaniline composite ($TiO_2PAn$). Although the $TiO_2An$ had negligible UV-visible absorption, the $TiO_2PAn$ showed strong absorption in the UV-visible region. Photoluminescence (PL) peaks of $TiO_2An$ were shifted toward red with the reduction of the excitation energy, which could be due to the multiple emission centers. The luminescence peak shift stopped at 501 nm. The PL spectra of $TiO_2PAn$ exhibited three emission peaks at 2.88 eV (430 nm), 2.48 eV (501 nm) and 2.22 eV (558 nm). The new emission center (2.22 eV) was observed after polymerization. Field emission scanning electron microscope image showed crack-free composite film.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.392-396
• /
• 2014

New organic-inorganic composite of 2,4-dihydroxybenzophenone (BP-1) encapsulation into dodecylbenzenesulfonate (DBS) modified layered double hydroxide (LDH) was successfully prepared. The surface, structural, thermal and absorption properties of the BP-1/DBS-LDH nanohybrid was characterized by BET analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG) and diffuse reflectance UV-Vis absorbance spectra (DRUV-vis). The interlayer configuration of composite and the adsorption mechanism of BP-1 on MgAl-DBS-LDH were discussed. It was suspected that DBS anions located in the form of monolayer arrangement with a $75^{\circ}$ anti parallel angle between dodecylbenzenesulfonate chain axis. The diffuse reflectance UV-Vis absorbance results revealed that the UV absorbing wavelength of BP-1/DBS-LDH evidently extends to about 400 nm, which shows that the BP-1/DBS-LDH has the potential application as a UV absorber.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제19권2호
• /
• pp.255-258
• /
• 2009

Structure and Properties of sericinjam sericin extracted was investigated using SDS-PAGE electrophoresis, UV, CD, and DSC. The molecular weight and its distribution of sericinjam sericin showed broad tailing pattern. Circular dichlroism spectra showed that the structure of sericinjam sericin in solution was different with domestic one. However, differential thermal calorimetric properties are similar to each other.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.27-32
• /
• 1998

도시 Traditionally, dyes extracted from onion shells have been used as natural pigments but dyeing methods with reproducibility have not been developed. In this study, the dyes were analyzed by high performance thin layer chromatography(HPTLC) to obtain the ratio of pigments in water and ethyl acetate extract. Furthermore, the present study was also carried out to obtain the information characteristic of wavelength which proportionally decrease for continuous dyeing reaction. Scanning of water extract showed 4 peaks by the mobile phase of benzene/ethyl acetate/acetic acid(40/10/5) and the peak 1 exhibited yellow color with the maximal absorption spectra of 306nm and 309nm while ethyl acetate extract showed 9 peaks in the same mobile phase. The water extract after ethyl acetate extraction was adjusted to 0.5 of O.D.(optical density) at 550nm by adding of water and compared wavelength of the pigments from 200 to 600nm to find the proportional decrease of wavelength. As the result, it showed that wavelength of 306nm could be the standard of dyeing monitoring points.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.282-282
• /
• 2013

The antimony sulfide ($Sb_2S_3$) thin films were deposited using the gas phase method which known as atomic layer deposition (ALD) on mesoporous micro-films. Tris (dimethylamido) antimony (III[$(Me_2N)_3Sb$] and hydrogensulfide ($H_2S$) were used as precursors to deposit $Sb_2S_3$. Self-terminating nature of $(Me_2N)_3Sb$ and $H_2S$ reaction were demonstrated by growth rate saturation versus precursors dosing time. Absorption spectra and extinction coefficient were investigated by UV-VIS spectroscopy. Scanning electron microscopic analysis and X-ray photoelectron spectroscopy (XPS) depth profile were employed to determine the conformal deposition.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.226-232
• /
• 2000

Polyimide is a well-known organic dielectric material, which has not only high chemical and thermal stability but also good electrical insulating and mechanical properties. In this research, we have synthesized a polyamic acid(PAA), which is a precursor of the polyimide. To obtain the optimum conditions of polyamic acid alkylamine salt(PAAS) Langmuir-Blodgett(LB) film deposition, the ${\pi}-A$ isotherms were examined by varying subphase temperature, barrier moving speed and spreading amount of solution. Film formation was verified by measuring transfer ratio, absorption of UV/vis spectra and scanning electron microscope(SEM) images.