• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.422-430
• /
• 1999

This paper concerns the study of a two-stage absorption heat pump cycle to utilize treated sewage. This two-stage cycle consists of coupling double-effect with parallel or series flow type and single effect cycle so that the first stage absorber and condenser produces hot water to evaporate refrigerant in the evaporator of the second stage. The effects of operating variables such as absorber temperature on the coefficient of performance have been studied for two-stage absorption heat pump cycle. The working fluid is lithium bromide and water solution. The efficiency of the two-stage absorption heat pump cycle has been studied and simulation results show that higher coefficient of performance could be obtained for the first stage with parallel flow type. The optimum ratio of solution distribution can be shown by considering the COP, the crystallization of solution and the generator temperature.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.87.2-87.2
• /
• 2012

The HI absorption against bright continuum source provides a unique opportunity to measure spin temperature of the neutral hydrogen gas. We find three cases among the sample of the VIVA (VLA Imaging of Virgo galaxies in Atomic gas) study with self absorption of strong central continuum by galactic HI gas. Using the HI flux ratio of emission and absorption, we constrain the spin temperature of the neutral hydrogen gas on their disk. The HI absorption is marginally resolved in these galaxies, which also allows us to probe the kinematics of the absorbing gas. All three galaxies are severely stripped in HI due to the intra cluster medium (ICM). We discuss the influence of environmental processes on the temperature and kinematics of HI in these galaxies.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.7
• /
• pp.567-574
• /
• 2013

An optical model is proposed in the white LED using phosphor and LED chip. In this paper a new model that describes the absorption rate and quantum efficiency with increasing the mixing ratio of phosphor in silicone, and the allotment of the phosphor absorption optical power in the several phosphor mixing in the silicone. Single phosphor in silicone from the optical measurement data before and after molding, the solution to get the blue optical power and the phosphor emission optical power is proposed. By these solution the absorption rate and the quantum efficiency was obtained. The model with single phosphor mixing in the silicone the validity was confirmed.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.225-228
• /
• 1985

The absorptions of Fe(Ⅲ), Tb(Ⅲ), Tl(Ⅰ), Ce(Ⅲ), Th(Ⅳ), and $UO_2^{2+}$ ions into the Dowex 50W-X2, 100-200 mesh resin were investigated by spectrophotometry to understand the abnormal strong absorption behavior of cations to cation exchange resins in concentrated HClO4. The distribution coefficients increase in the order : Tl(Ⅰ) < Fe(Ⅲ) < Tb(Ⅲ)∼Ce(Ⅲ) < $UO_2^{2+}$< Th(Ⅳ) and the order is interpreted in terms of the ratio of charge-to-ionic radius. The mole ratios of increment of $ClO_4^-$ ion absorption to metal ion absorption showed the same order as the distribution coefficients, which indicates that the electrostatic association between $ClO_4^-$ ion and metal ion plays a major role in the strong absorption.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.305-313
• /
• 2017

In this paper, sound absorption of thin elastic plates installed in a rigid duct is discussed using an analytic method. The number of plates can be one or two, and each plate might have micro-perforation. Vibration of the plates and sound pressure fields inside the duct and air cavity are expressed in terms of an infinite series of modal functions. Under the plane wave assumption, a low frequency approximation is derived by including the first few plate modes. It is found that the sound absorption coefficient of the plates without micro-perforation shows sharp peaks at resonance frequencies, and due to the interaction between the plates and air cavity, the resonance frequencies move as the cavity depth changes. For the case of micro-perforated plates, it is found that the sound absorption is mainly affected by the perforation ratio. When the perforation ratio is order of few percent, the sound absorption is almost independent of plate vibration.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.203-210
• /
• 2021

With the development of package printing technology, the package has expanded from the basic function of protecting products to the marketing function through package design. Color, the visual element that composes the package design, is delivered to the consumer most quickly and effectively. As color marketing of these package designs expands, accurate color reproduction that the product wants to express is becoming more important. The color of an object is transmitted by absorption and scattering of light. Spectral reflectance refers to the intensity of light reflected by an object at different wavelengths by the spectral effect. As a result, the color of the object is expressed in various colors. Packaged printing inks have their own absorption and scattering coefficients, and the Kubelka-Munk model for color reproduction and prediction defines the relationship between these correlation coefficients through reflectance. In the Kubelka-Munk model for color reproduction and prediction, the relationship between the absorption and scattering coefficients (K/S) of printed material is predicted as the sum of the K/S values according to the mixing ratio of all color ink used. In this study, the reflectance of the measured print is reversely calculated at the mixing ratio of print ink using the Kubelka-Munk model. Through this, the relationship value of the ink-specific absorption/scattering coefficient constituting the final printed material is predicted. Delta E is derived through the predicted reflectance, and the similarity between the measured value and the predicted value is confirmed.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.456-460
• /
• 1998

This research was attempted to prove suppressing effect of medicinal plants on the intestinal absorption of toxic heavy metals. In vitro study was performed by membrane filtration considering intestinal absorption conditions. From drinking water contaminated singly with 10 and 50 times level of water quality standard for heavy metals, the removal ratio of lead was $40{\sim}60%$ by Chicorium intybus, Angelica acutiloba and Ganoderma lucidium. And the removal ratio of cadmium was $20{\sim}40%$. The removal ratio of lead contaminated with both was $30{\sim}50%$ by every sample similarly, the removal ratio of cadmium was $10{\sim}30%$. The removal ratio of Angelica acutiloba was more higher than Chicorium intybus and Ganoderma lucidium. Considering the extraction conditions of samples, $70^{\circ}C$, 2 min conditions were higher than $95^{\circ}C$, 10 min conditions, the removal ratios of heavy metals were similar. And the membrane filter permeated the material under 500 mw selectively, so the final filtrate could regard as passive transport in intestinal absorption. In conclusion, this research exhibited that the medicinal plants beverages have a suppressing effect on intestinal absorption of lead and cadmium in drinking water.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.431-439
• /
• 1999

A generator-GAX combined rectification system of an ammonia absorption heat pump was investigated to get the optimum design values. The mass and heat transfer phenomena of the rectification system were analysed. The number of column plates, equilibrium temperature of solution on each plate and flow rates of solution and vapor generated were predicted. The characteristics of mass and heat transfer of the generator-GAX combined rectification system, i.e. concentration difference of leaving solution and vapor on each column plate, were found to be mainly governed by the pressure of generator, reflex ratio and temperature difference of analyser coolant. The number of rectification column plates for each different pressure in generator was obtained. The optimum locations for installing the feeder from solution-cooled absorber and GAX desorber in generator were predicted. The improvement of COP was followed by the increase of the rectifier efficiency and the number of column plate, and the decrease of reflex ratio.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.65-70
• /
• 1993

The effect of particle size of Al powder, water repellent agent and finishing agent on frost resistance, absorption ratio and structure of micropore was examined to improve the physical properties and durability of ALC. According as the amount added of water repellent agent was increased, frost resistance was improved and absorption ratio was decreased. From one side freezing /thaw test, finishing agent which has a low vapor permeation located the crack at close indoor point of ALC specimen. ALC produced from fine Al powder has a low volume reduction by scalling and a sound appearance after freezing/thawing test and top surface freezing test, The crystal of tobermorite in ALC matrix was converted to calcium carbonate by carbonation which was accelerated with the decreasing of water content. Since the micropore of ALC was filled up by calcium carbonate, void ratio was reduced and crack was detected after complete carbonation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.1
• /
• pp.21-26
• /
• 2009

This study was performed to evaluate the physical and mechanical properties of concrete using waste activated carbon. Materials used were ordinary portlant cement, crushed coarse aggregate, natural fine aggregate, waste activated carbon, and superplasticizer. The substitution ratios of waste activated carbon were 0,1,2,3,4,5,6,7,8,9 and 10%. The unit weight was decreased and water absorption ratio was increased with increasing the waste activated carbon content, respectively. When the substitution ratio of waste activated carbon was 3%, compressive strength, flexural strength and dynamic modulus of elastisity were more higher than that of the ordinary portland cement (OPC), and it was decreased with increasing the waste activated carbon content, respectively. The most effective contents of waste activated carbon was 2% in performance and 4% in practical use Accordingly, waste activated carbon can be used for concrete material.