• Title/Summary/Keyword: Absorption Rate

Search Result 2,242, Processing Time 0.028 seconds

A STUDY OF MONOMER RELEASE FROM PIT AND FISSURE SEALANTS ACCORDING TO VARIOUS LIGHT SOURCES (광원에 따른 수종의 치면열구전색제로부터 용리되는 모노머에 관한 연구)

  • Seo, Hyun-Woo;Park, Ho-Won
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.2
    • /
    • pp.284-292
    • /
    • 2005
  • The aim of this study was to identify and quantify the major or detectable monomers released from any of five commercially-available, light-cured pit and fissure sealants with three different light sources : conventional halogen light curing unit, plasma arc light curing unit and LED curing unit. After curing, specimens were immediately immersed in distilled water for different time intervals. The time related release of monomers were analyzed by high performance liquid chromatography(HPLC). Identification and quantitative analysis of monomers were performed by the comparison of the elution time and the absorption peak height of the eluates with those of the authentic sample. The result of this study can be summarized as follows. 1. Standard solution peaks with retention times of 2.3, 3.2, 5.6, 6.5, 10.4 minutes were identified as BPA, TEGDMA, UDMA, Bis-GMA, Bis-DMA, respectively. 2. None of the chromatograms of the tested sealants displayed peaks with the same retention time as that of the standard solution, except for TEGDMA. 3. The highest release rate of TEGDMA was observed during the 12hr period for all samples and declined thereafter. 4. The elution of TEGDMA from curing with Halogen curing unit for 20 second and LED for 10 second was less than that resulting from curing with Plasma arc for 3 second. 5. TEGDMA was detected at much lower levels in eluates from the Pit & Fissure $Sealant^{TM}$ than other sealants. The elution of TEGDMA from the $Helioseal^{(R)}$ F cured with Halogen light curing unit, the $Concise^{TM}$ cured with Plasma arc curing unit and the $Teethmate^{(R)}$ F-1 cured with LED curing unit were higher than other sealants.

  • PDF

NECROSIS OF ALVEOLAR BONE BY FORMOCRESOL : CASE REPORT (Formocresol에 의한 치조골 괴사의 치험례)

  • Park, Cheol-Hong;Lee, Chang-Seop;Lee, Sang-Ho;Lee, Nan-Young
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.4
    • /
    • pp.657-661
    • /
    • 2005
  • Various chemotherapeutic agents have been recommended for pulpotomy of primary teeth, and there are formocresol, ferric sulfate, and calcium hydroxide. Of those, formocresol has fixation effect of pulp tissue and high clinical success rate, so it is most commonly used agent. But formocresol has strong cytotoxic effects, thus many articles reported displacement and loss of permanent successor, amelogenesis imperfecta, mutation by general absorption, possibility of cancer induction. Recently, it has been reported that leakage by imperfect temporary sealing when FC-soaked cotton was inserted into the root canal caused necrosis of surrounding tissues. and that necrosis of alveolar bone related to the use of excessive formocresol. In this case, 2nd primary molar of upper left jaw was treated using formocresol in local clinic, but extracted because of lasting pain. Furthermore, symptoms didn't disappear so patient was refered to us. The patient was 8-year-old male, had foul odor from oral cavity and circular alveolar bone necrosis around the permanent successor' crown. Thus sequestrectomy was operated and observed through 19 months after operation, we found normal root development of permanent successor but no complete regeneration of alveolar bone defect and attached gingiva. Lesion of periodontal tissues by formocresol is irreversible, so we have to confirm the indication in using formocresol and pay attention to complete temporary sealing.

  • PDF

An Analysis of the Characteristics of Learning Contents Structure related to 'Properties of Matter' of K-12 Science Textbooks (유치원, 초등, 중등학교 과학 교재의 '물질의 성질' 관련 학습 내용 전개에 대한 특징 분석)

  • Paik, Seoung-Hey;Cho, Boo-Kyung;Kim, Hyo-Nam
    • Journal of The Korean Association For Science Education
    • /
    • v.20 no.4
    • /
    • pp.527-541
    • /
    • 2000
  • The purpose of this study was to find out the characteristics of learning contents structure of K-12 science textbooks. The characteristics are related to 7 main concepts of matter properties; reaction rate, other reaction, density, solution, state change, absorption, and surface property. The contects are analyzed into 5 types of characteristics; type of concept extension, type of concept deepness, type of same level concept, type of confusion with other concepts, and type of concept interruption. First two types are positive content structures, but the others are negative structures. The findings are as follows. First, a lot of learning contents have the characteristic of 'type of same level concept'. There are few which have the characteristic of 'type of concept deepness'. Second, there are a lot of concepts related to 'properties of matter' which are not represented any more in middle and high school science textbooks. Those concepts are importantly taught in early childhood education and elementary school science. Most of the learning contents don't represent 'type of concept deepness'. Therefore the science textbooks needs to be restructuring.

  • PDF

Fabrication of Lightweight Microwave Absorbers with Co-coated Hollow Silica Microspheres (저밀도 실리카 중공미세구 표면에 Co 박막의 코팅에 의한 경량 전파흡수체 제조)

  • Kim, Sun-Tae;Kim, Sung-Soo;Ahn, Jun-Mo;Kim, Keun-Hong
    • Journal of the Korean Magnetics Society
    • /
    • v.15 no.2
    • /
    • pp.67-75
    • /
    • 2005
  • For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.

Construction and operational characteristics of a Ultra-Short pulse Cr4+:YAG laser (극초단 펄스 Cr4+:YAG 레이저의 제작 및 동작 특성)

  • Lee Bong Yeon;Lee Dong Han;Lee Chi Weon;Yoon Seok Beom;Choo Han Tae
    • Korean Journal of Optics and Photonics
    • /
    • v.15 no.5
    • /
    • pp.455-460
    • /
    • 2004
  • We have developed a mode-locked ultra-short pulse C $r^{4+}$:YAG laser, as well as a continuous wave C $r^{4+}$:YAG laser. The laser was pumped by a Nd:YAG laser and its characteristics were investigated. In continuous wave mode, we obtained as much as 600 mW at 1.436 ${\mu}{\textrm}{m}$ with pumping power of 6 W, by using an output coupler with a reflectivity of 98%. The power slope efficiency was 10%, when the gain medium was cooled to 19$^{\circ}C$. The tuning range was varied from 1.39 ${\mu}{\textrm}{m}$ to 1.55 ${\mu}{\textrm}{m}$ and the maximum power was 400 mW at 1.492 ${\mu}{\textrm}{m}$ with a 3-plate birefringent filter. The C $r^{4+}$:YAG laser was mode-locked by a Kerr lens mode locking method. Mode locking at 1.436 ${\mu}{\textrm}{m}$was initiated by slightly rocking a mirror mount. But the pulses were very unstable because of the strong water absorption at this region. So we shifted the lasing wavelength to 1.492 ${\mu}{\textrm}{m}$ by using a 3-plate birefringent filter. Then we obtained stable state mode-locking with the maximum average power of 280 mW for a pumping power of 6 W. The pulse width of 43 fs was measured using an autocorrelator and the repetition rate was 104.5 MHz.

Cell migration and Anti-inflammatory Effect of Red Ginseng Extracts Fermented with Laetiporus Sulphureus (붉은덕다리버섯 균사체로 발효한 홍삼 배양액의 cell migration 및 항염 효능에 관한 연구)

  • Oh, Seong-Hwa;Choi, Soo-Yeon;Lee, Nu Rim;Lee, Jung No;Kim, Dong-Seok;Lee, Sang-Hwa;Park, Sung-Min
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.40 no.3
    • /
    • pp.297-305
    • /
    • 2014
  • Red ginseng (RG) contains specific ginsenosides (Rg2, Rg3) which show various pharmacological effects and absorption rate in the body better than panax ginseng. Therefore many people have been used it for health for a long time. Furthermore, many researchers have been studying its biological activities for a long times because fermentation generates lots of beneficial small molecules good for health. In this study, we fermented red ginseng with mycelium of Leatiporus sulphures var. miniatus for 7 days. As a result, we found that three ginsenosides Rg1, Re and Rb2 were decreased from 0.24, 0.25, 0.16 mg/g to 0.12, 0.1, 0.03 mg/g respectively HPLC analysis. In addition, we studied biological activities of fermented red ginseng (FRG) about skin ageing such as anti-inflammation, cell migration, anti-oxidation, collagen type 1 synthesis, and MMP-1 inhibition activities. As a result, FRG were shown higher anti-inflammatory and cell migration promoting activities than RG. FRG inhibited production of nitric oxide (NO) and mRNA expression of inducible nitric oxide synthase (iNOS) and decreased interleukin (IL)-6 induced by LPS stimulation in RAW 264.7 cells. In conclusion, this study suggest that FRG could be a potential source as a new natural anti-inflammatory agent.

Study on the Stability of Biotin-containing Nano-liposome (바이오틴 함유 나노리포좀의 안정성에 관한 연구)

  • Yang, Seong Jun;Kim, Tae Yang;Lee, Chun Mong;Lee, Kwang Sik;Yoon, Kyung-Sup
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.46 no.2
    • /
    • pp.133-145
    • /
    • 2020
  • This study utilized nano-liposomes for the purpose of stabilizing and increasing the solubility of biotin, a water-soluble active material with low solubility. The particle size, zeta potential, and polydispersity index were confirmed with a nano zetasizer. It was possible to manufacture nano liposomes at 100 to 250 nm of particle size and -80 to -30 mV of zeta potential. Dialysis membrane method (DMM) was used to measure the capsulation efficiency of biotin in biotin nano-liposomes, and results showed that pH increased biotin nano-liposomes had higher capsulation efficiency than normal biotin nano-liposome. Through this experiment, it was confirmed that the pH has a great influence on the stability of biotin nano-liposomes. In vitro franz diffusion cell method was used to measure in vitro skin absorption rate of biotin nano-liposomes. The shape of the formulation and biotin solubility in nano-liposome was observed by cryogenic transmission electron microscopy (cryo-TEM). Through this study, we confirmed that biotin, which is introduced as closely related to hair health, can be incorporated into a nano-liposome drug delivery system, to make biotin nano-liposome with improved solubility and precipitation problems.

Quality characteristics of noodle added with Aster scaber extracts solution and powder (참취 추출물을 첨가한 국수의 품질 특성)

  • Kim, Guy-Min;Kim, Hyun-Gi;Hong, Ju-Yeon;Choi, Young-Jun;Nam, Hak-Sik;Shin, Seung-Ryeul
    • Food Science and Preservation
    • /
    • v.22 no.3
    • /
    • pp.328-334
    • /
    • 2015
  • The purpose of this study was to investigate the physicochemical and sensory characteristics of A. scaber noodle added with A. scaber extract solution or powder. The weight of cooked noodle and noodle added with A. scaber extract solution was higher than those of the non-added noodle (control) and dried A. scaber powder added noodle. As the amount of A. scaber extract solution or powder was increased, the water absorption rate of noodle was decreased. As the amount of A. scaber solution or powder was increased, the 'L' values of noodles were decreased. Since the 'a' values of all noodles were negative and the 'b' values of all noodles were positive, the color of all noodles were determined to be yellow green. The pH of noodles were 5 to 6 in control noodles and noodles with A. scaber powder. The pH of noodle added A. scaber extract solution was lower than those of others. As amount of A. scaber extract solution or powder was increased, the elasticity of all noodles was decreased. The chewiness of noodles was the highest in noodle added A. scaber extract powder. The quality of noodle added A. scaber extract solution was the excellent among the all other noodles. This result showed that, the quality characteristics and palatability of noodle added A. scaber extract solution or powder was higher than those of control noodle.

On Preparation and Effects of Composts from Industrial Wastes via High Temperature and Aerobic conditions (유기성 산업폐기물의 고온·호기성 퇴비화 및 비효평가)

  • Kweon, Jin-Wook;Lee, Kyu-Seung;Park, Seung-Heui
    • Korean Journal of Agricultural Science
    • /
    • v.22 no.2
    • /
    • pp.143-150
    • /
    • 1995
  • In order to find a way to utilize paper mill sludge, its composting was conducted with anaerobic waste of kraft paper sludge, raw kraft paper sludge, and CMC sludge(CMC : Sodium Carboxymethylcellulose) under aerobic condition at $50^{\circ}C$. It took 3 days for initial fermentation with anaerobic waste and CMC sludge, and six days with raw kraft paper sludge. Each compost was applied to radish(Rhaphanus Stativus L.), and absorption rate of staple nutrients increased 6.7~9.3 times higher in N, 17~21 times in P and 2~3 times in K than control at the harvesting stage. Also, organic matter contents were increased 1.5~2.3 times 4.5~5.3 times in CEC compared to control soil.

  • PDF

Comparison of Shelf-life on Peeled Taro(Colocasia antiquorum SCHOTT) Stored in Various Immersion Liquids (박피 토란(Colocasia antiquorum SCHOTT)의 침지 보관액에 따른 저장효과 비교)

  • 정승원;정진웅
    • Food Science and Preservation
    • /
    • v.9 no.2
    • /
    • pp.154-160
    • /
    • 2002
  • This study was carried out to investigate the efficacy of electrolyzed oxidizing(EO) water, electrolyzed oxidizing water with 0.5% citron juice and 0.1% aluminium potassium sulfate (APS) solution as the storing liquids to maintain quality and extend shelf life of peeled taro. Water content of peeled taro increased from 80.55% to 82.12∼84.24% after 25 days storage due to moisture absorption. However, there were no significant difference between treatments. In case of color value of peeled taro, L value was slowly decreased and a, b value was generally increased. Texture of peeled taro decreased from initial 4,520$\pm$75 g to 4,160$\pm$80 g after 25 days storage in EO water with 0.5% citron juice, which is the least reduction value in all treatments. Treatment of EO water with 0.5% citron juice maintained 6.99 mg%(57%) of total vitamin C after 25 days storage which showed highest total vitamin C content between treatments. In most treatments, total sugar was decreased in fast rate for 15 days storage and slowly decreased after 15 days storage. Free sugar content was not changed significantly during storage. In case of sucrose content which is the major portion of free sugar, reduction continued until the midst of storage. and after that it increased to 1.5∼2 times of initial contents. However, there were no differences between treatments and storage days in contents of fructose, glucose and maltose. Major amino acids in peeled taro were aspartic acid and glutamic acid with 1,084.8 and 691.8 mg/100g respectively. At 25 days of storage, aspartic acid content in treatment of EO water was increased about 13.9%. Treatment of EO water with 0.5% citron juice was the most effective in respect to the reduction ratio of total amount of essential amino acids.