• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.365-371
• /
• 2013

The purpose of this study is to develop a sound absorbing material for indoor which manufactured by a clay and binding material. The seven kind of sound absorbing specimens which sintered through a mold process at high temperature were manufactured for the purpose of testing sound absorption performance. The random and normal sound absorption coefficients were measured for the sintered clay sound absorbing specimens with different particle size, density and mixture ratio. From the experimental results, it was found that its particle size was closely related to the sound absorption performance. It was shown that the sintered clay sound absorbing specimen had the sound absorption properties of a fiber-type or a resonance-type sound absorbing material depending on the particle size.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.922-928
• /
• 2006

An absolute absorption cross section of benzene was measured with a spectrometer system including a mono-chrometer and a grating in the wavelength region of $240{\sim}280nm$ under the atmospheric pressure and room temperature in the laboratory. A certificated reference benzene gas ($98{\mu}mol/mol$ in $N_2$) was used to measure its absorption cross section. A 710 mm cell with a quartz window and a 150 W Xe arc lamp were employed. The magnitude of absorption cross section of $1.41{\times}10^{-18}cm^2$ was lower than that of the reference spectra ($2.5{\times}10^{-18}cm^2$) of high resolution spectrometer, Total measurement uncertainty was estimated to be 4.0%.

• Journal of Hydrogen and New Energy
• /
• v.23 no.5
• /
• pp.448-454
• /
• 2012

In this paper, a three-dimensional hydrogen absorption model is applied to a thin double-layered annulus ZrCo hydride bed and validated against the temperature evolution data measured by Kang et al. The present model reasonably captures the bed temperature evolution behavior and the 99% hydrogen charging time. The equilibrium pressure expression for hydrogen absorption on ZrCo is derived as a function of temperature and the H/M atomic ratio based on the pressure-composition isotherm data given by Konishi et al. In addition, this present model provides multi-dimensional contours such as temperature and H/M atomic ratio in the thin doublelayered annulus metal hydride region. This numerical study provides fundamental understanding during hydrogen absorption process and indicates that efficient design of the metal hydride bed is critical to achieve rapid hydrogen charging performance. The present three-dimensional hydrogen absorption model is a useful tool for the optimization of bed design and operating conditions.

• Journal of the Korean Society of Combustion
• /
• v.9 no.3
• /
• pp.27-35
• /
• 2004

Diode laser absorption sensors are advantageous because they may provide fast, sensitive, absolute, and selective measurements of species concentration. These systems are very attractive for practical applications owing to its compactness, resonable cost, robustness, and ease of use. In addition, diode lasers are fiber-optic compatible and thus enable simultaneous measurements of multiple species along a line-of-sight. Recent advances of room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications make it possible to be applied for combustion diagnostics based on diode laser absorption spectroscopy. Therefore, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor systems are now appearing for variety of applications. The objectives of this research are to develope a new gas sensing system and to verify feasibility of this system. Wavelength and power characteristics as a function of injection current and temperature are experimentally found out. Direct absorption spectroscopy has been demonstrated in these experiments and has a bright prospect to this diode laser system.

• The Korean Journal of Nuclear Medicine
• /
• v.5 no.2
• /
• pp.19-40
• /
• 1971

Since the iron balance is maintained by regulated intestinal absorption rather than regulated excretion, there have been many reports concerning the factors which may influence the intestinal iron absorption. As the liver is the largest iron storage organ of the body, any hepatocellular damage may result in disturbances in iron metabolism, e,g., frequent co-existence of hemochromatosis and liver cirrhosis, or elevated serum iron level and increased iron absorption rate in patients with infectious hepatitis or cirrhosis. In one effort to demonstrate the influence of hepatocellular damage on intestinal iron absortion, the iron absorption rate was measured in the rabbits whose livers were injured by a single subcutaneous injection of carbon tetrachloride (doses ranging from 0.15 to 0.5cc per kg of body weight) or by a single irradiation of 2,000 to 16,000 rads with $^{60}Co$ on the liver locally. A single oral dose of $1{\mu}Ci\;of\;^{59}Fe$-citrate with 0.5mg of ferrous citrate was fed in the fasting state, 24 hours after hepatic damage had been induced, without any reducing or chelating agents, and stool was collected for one week thereafter. Serum iron levels, together with conventional liver function tests, were measured at 24, 48, 72, 120 and 168 hours after liver damage had been induced. All animals were sacrificed upon the completing of the one week's test period and tissue specimens were prepared for H-E and Gomori's iron stain. Following are the results. 1. Normal iron absorption rate of the rabbit was $41.72{\pm}3.61%$ when 0.5mg of iron was given in the fasting state, as measured by subtracting the amount recovered in stool collected for 7 days from the amount given. The test period of 7 days is adequate, for only 1% of the iron given was excreted thereafter. 2. The intestinal iron absorption rate and serum iron level were significantly increased when the animal was poisoned by a single subcutaneous injection of 0.15cc. per kg. of body weight of carbon tetrachloride or more, or the liver was irradiated with a single dose of 12,000 rads or more. The results of liver function tests which were done simultaneously remained within normal limit except SGOT and SGPT which were somewhat increased. 3. In each case, there has been good correlation between the extent of liver cell damage and degree of increased iron absorption rate or serum iron level. 4. The method of liver damage appeared to make no obvious difference in the pattern of iron deposit in liver. This may be partly due to the fact that tissue specimens were obtained too late, for by this time the elevated serum iron level had returned within normal range and the pathological changes were almost healed. 5. The possible factors and relationship between intestinal iron absorption and hepatic parenchymal cell damage has been discussed.

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.605-613
• /
• 1997

This study was to investigate interaction between dietary protein and Ca levels in Ca metabolism and renal function in osteporosis rats. Five week-old female rats were fed a low Ca diet for 4 weeks after ovariectomy operation to establish rat models of osteoporosis. The ovariectomized osteoporosis rats were divided into six groups and were fed experimental diets which contained two levels of protein, normal (20%) and high(40%) , and three levels of Ca, low (0.06%), normal (0.47%) and high(0.94%) for 4 weeks , respectively. The ovaricetmized rat model of osteoporosis showed a remarkable decrease in serum Ca concentration, fresh weight and breaking force of femur, Ca and P contents of femur, and apparent absorption and retention of Ca. The supplementations of Ca and P contents of femur, and apparent absorption and retention of Ca. The supplementations of Ca at the dietary levels of normal and high levels significantly enhanced Ca bioavailability shown in the above experimental rat models of osteoporosis, regardless of dietary protein levels ; whereas the rats which were fed the low Ca diet demonstrated rather a decrease in its bioavailability. Irrespectively of the dietary Ca levels, the rats which were fed high protein diet exhibited an increase in kidney weight, urinary Ca, volume and hydroxyproline, and glomerular filtration ratio(GFR). The results show that dietary protein and calcium levels affect the renal function and Ca metabolism independently, while the interaction between protein and calcium have not been shown.

• Journal of Nutrition and Health
• /
• v.28 no.9
• /
• pp.825-833
• /
• 1995

This study was performed to investigate the influence of dietary fiber, which from whole food on the serum lipid level and bowel function in rats. The fiber sources of experimental diets were prepared by drying and milling of small water dropwort(WD), mugwort(MW), butterbur(BB) and apple(AP). Each fiber sources was mixed at the 15% level of the diet. The level of dietary fiber in WD, MW, BB diets was similar but that in AP diet was slightly low. Male rats of Sprague-Dawley strain were blocked into 5 groups ; WD, MW, BB, AP, FF(fiber free). The animals were fed ad libitum each of experimental diets for 37 days. Food intake of AP and FF groups were than other groups, FF group was lower than other grous in food efficiency ratio. MW group showed highest level in fecal weight and fecal water content and group has the longest transit time compare to other groups. Serum triglyceride level was not significantly different among groups. BB group showed the lowest level in the serum total cholesterol. WD and MW groups showed slightly higher level in the serum HDL cholesterol than other groups. Mucosa weight was not significantly different among groups. The activity of maltase in mucosa of small intestine was highest in FF groups. Absorption rates of calcium were not significantly different among groups. Absorption rate of magnesium was higher in FF group compare to others. And, absorption rates of phosphorus in MW and FF groups were slightly lower than other groups.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.621-625
• /
• 2007

Oscillating wave amplitude in a bottom-mounted owe chamber designed for wave energy converter is investigated by applying characteristic wave conditions in Korean coastal water. The effects of shape parameters of OWC chamber in a view of wave energy absorbing capability are analyzed. Both experimental and numerical approaches are adopted and their results are compared to optimize the shape parameters which can result in a maximum power production under given wave distribution. The experiment was carried out in a wave flume under 2-D assumption of OWC chamber. In numerical scheme, the potential problem inside the chamber is solved by use of the Green integral equation associated with the Rankine Green function, while outer problem with the Kelvin Green function taking account of fluctuating air pressure in the chamber. Air duct diameter, chamber width, and submerged depths of front skirt and back wall of chamber changes the magnitude and peak frequency of wave absorption significantly.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.362-371
• /
• 1977

In this paper application of the projection operator technique to the study of NMR absorption line shape and free induction decay curve is explored. It is found that the projection operator technique can provide a convenient means for deriving a set of hierarchy equations which may serve as a good starting point for theoretical calculation of the absorption line and free induction decay function by successive approximation or by an appropriate decoupling approximation. A brief review of linear response theory of NMR line shape and the relation between the absorption line shape and free induction decay function are also described.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.47-52
• /
• 2010

The wave energy absorption efficiency and the first-order and the time-mean second-order wave loads of a three-dimensional bottom-mounted oscillating water column (OWC) chamber structure are studied. The potential problem is solved by making use of a hybrid Green integral equation associated with the finite-waterdepth free-surface Green function outside a twin chamber and the Rankine Green function inside taking account of the fluctuating air pressure inside the chamber. Numerical results of the primary wave energy converting efficiency and the oscillating and steady wave loads of a three-dimensional bottom-mounted OWC pilot plant have been presented.