• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.23.2-23.2
• /
• 2008

We presented the accurate absolute dimensions and distances of fifteen main sequence eclipsing binaries. The photometric and spectroscopic solutions of the binary systems were determined by analyzing light curves and radial velocity curves collected from the literature using the Wilson-Devinney computer code. The fifteen double-line spectroscopic binaries consist of nine detached systems; QX Car, AH Cep, CW Cep, ZZ Cep, XY Cet, RX Her, V451 Oph, VV Pyx and V760 Sco, six semi-detached systems; LY Aur, IU Aur, AO Cas, DM Per, V Pup and HU Tau. The temperatures of the binary systems were determined from their colors using the color-temperature calibrations. Then the temperature of each component star were determined using the temperature ratio which was adjusted from the light curves. We estimated the possible Z values and ages for the detached systems by adopting the Y2 (Yonsei-Yale) stellar evolutionary tracks. The derived distances are in good agreement of the Hipparcos distances whose error of parallax is within 10 %. Finally these well-investigated systems will be used as the standard eclipsing binaries.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.171-177
• /
• 2020

Removal through adsorption is the most widely used and effective treatment method for volatile organic compounds (VOCs) in exhaust gases. However, at high temperatures and humidity, adsorption is competitive due to the presence of moisture and unsmooth physical adsorption thereby deteriorating adsorption performance. Therefore, water adsorption honeycomb (WAH) and VOCs adsorption honeycomb (VAH) were prepared to improve VOCs adsorption at high temperatures and humidity. Adsorbed toluene amounts on single honeycomb (SH), containing only VAH, and combined honeycomb (CH), containing WAH and VAH, were determined. Further, the toluene adsorption rates of honeycomb adsorbents mounted on rotary systems, VAH-single rotor (SR) and WAH/VAH-dual rotor (DR) were determined. Toluene adsorption by WAH/VAH-CH (inlet temperature: 40-50℃; absolute humidity: 28-83 gH₂O/kg-dry air) was 1.6 times that by VAH-SH, and the water adsorption efficiency of WAH/VAH-CH was 1.7 times that of VAH-SH. The adsorption/removal efficiency of the WAH/VAH-DR (inlet temperature: 45℃; absolute humidity: 37.5 gH₂O/kg-dry air) was 3% higher than that of VAH-SR. This indicates that the WAH at the rotor inlet selectively removed water, thereby improving the adsorption efficiency of the VAH at the outlet.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.10
• /
• pp.891-897
• /
• 2005

The characteristics of energy Performance for total heat exchanger have been investigated under various conditions. In cooling operation the latent and enthalpy efficiency are affected by the difference of absolute humidity ratio between indoor and outdoor air. In addition to this the characteristics of absorbing material in the element affects the energy performance. Low dry bulb temperature of indoor air or high absolute humidity ratio in outdoor air give high latent and enthalpy efficiency even with the same temperature difference of dry bulb temperate between indoor and outdoor air.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.27-33
• /
• 2004

An accurate knowledge of the AIT(Autoignition temperatures) of chemicals is important in developing appropriate prevention and control measures in industrial fire protection. The AITs describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The measurement AITs are dependent upon many factors. namely initial temperature. pressure, volume, fuel/air stoichiometry. catalyst material, concentration of vapor, ignition delay time. This study measured the AITs of acids from ignition delay time by using ASTM E659-78 apparatus which was produced in the year 1994. The experiment AITs were a good agreement with the calculated AITs by the proposed equations with a few A.A.P.E.(average absolute percent error) and A.A.D.(average absolute deviation).

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.63-74
• /
• 2003

The build-up of the heat field in shallow coastal water due to a point source has been investigated using an analytical solution of a time-integral form derived by extending the solutions by Holley(1969) and also presented in Harleman (1971). The uniform water depth is assumed with non-isotropic turbulent dispersion. The alongshore-flow is assumed to be uni-directional, spatially uniform and oscillatory. Due to the presence of the oscillatory alongshore-flow, the heat build-up occurs in an oscillatory manner, and the excess temperature thereby fluctuates in that course and even in the quasi-steady state. A series of calculations reveal that proper choices of the decay coefficient as well as dispersion coefficients are critical to the reliable prediction of the excess temperature field. The dispersion coefficients determine the absolute values of the excess temperature and characterize the shoreline profile, particularly within the tidal excursion distance, while the decay coefficient determines the absolute value of the excess temperature and the convergence rate to that of the quasi-steady state. Within the e-folding time scale $1/k_d$ (where $k_d$ is the heat decay coefficient), heat build-up occurs more than 90% of the quasi-steady state values in a region within a tidal excursion distance (L), while occurs increasingly less the farther we go to the downstream direction (about 80% at 1.25L, and 70% at 1.5L). Calculations with onshore and offshore discharges indicate that thermal spreading in the direction of the shoreline is reduced as the shoreline constraint which controls the lateral mixing is reduced. The importance of collecting long-term records of in situ meteorological conditions and clarifying the definition of the heat loss coefficient is addressed. Interactive use of analytical and numerical modeling is recommended as a desirable way to obtain a reliable estimate of the far-field excess temperature along with extensive field measurements.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.291-296
• /
• 2014

The apartment buildings were hard to emission of water vapor by reduced infiltration. The purpose of this study was to investigate the generation of indoor temperature and humidity in the recent construction of small size apartment buildings. The temperature and humidity were measured in 3 apartments in Seongnam and Daejeon city. During the winter indoor temperature and relative humidity were measured ranged from 20 to $24^{\circ}C$ and 40 to 60%. Generated humidity caused by various characteristics of the residents, rather than external influences. Compare daytime (6:00 to 22:00) and nighttime (22:00 to 6:00), the temperature is low and absolute humidity is high at nighttime. Condensation is likely to occur at nighttime. Using the cumulative relative frequency and absolute humidity, small apartments design criteria (temperature, relative humidity) can be set.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.103-110
• /
• 2018

In this paper, we introduce evaluation method of time series prediction model with new approach of Mean Absolute Percentage Error(hereafter MAPE) and Symmetric Mean Absolute Percentage Error(hereafter sMAPE). There are some problems using MAPE and sMAPE. First MAPE can't evaluate Zero observation of dataset. Moreover, when the observed value is very close to zero it evaluate heavier than other methods. Finally it evaluate different measure even same error between observations and predicted values. And sMAPE does different evaluations are made depending on whether the same error value is over-predicted or under-predicted. And it has different measurement according to the each sign, even if error is the same distance. These problems were solved by Maximum Mean Absolute Percentage Error(hereafter mMAPE). we used the absolute maximum of observed value as denominator instead of the observed value in MAPE, when the value is less than 1, removed denominator then solved the problem that the zero value is not defined. and were able to prevent heavier measurement problem. Also, if the absolute maximum of observed value is greater than 1, the evaluation values of mMAPE were compared with those of the other evaluations. With Beijing PM2.5 temperature data and our simulation data, we compared the evaluation values of mMAPE with other evaluations. And we proved that mMAPE can solve the problems that we mentioned.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1231-1235
• /
• 2004

The needs of micro scale thermal detecting technique are increasing in biology and chemical industry. For example, Thermal finger print, Micro PCR(polymer chain reaction), ${\mu}TAS$ and so on. To satisfy these needs, we developed a DTSA(Diode Temperature Sensor Array) for detecting and controlling the temperature on small surface. The DTSA is fabricated by using VLSI technique. It consists of 32 ${\times}$ 32 array of diodes (1,024 diodes) for temperature detection and 8 heaters for temperature control on a 8mm ${\times}$ 8mm surface area. The working principle of temperature detection is that the forward voltage drop across a silicon diode is approximately proportional to the inverse of the absolute temperature of diode. And eight heaters ($1K{\Omega}$) made of poly-silicon are added onto a silicon wafer and controlled individually to maintain a uniform temperature distribution across the DTSA. Flip chip packaging used for easy connection of the DTSA. The circuitry for scanning and controlling DTSA are also developed

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.917-922
• /
• 2010

In this paper, a new temperature-insensitive CMOS dual-mode current reference for low-voltage low-power mixed-mode circuits is proposed. The temperature independent reference current is generated by summing a proportional to absolute temperature(PTAT) current and a complementary to absolute temperature(CTAT) current. The temperature insensitivity was achieved by the mobility and the other which is inversely proportional to mobility. As the results, the temperature dependency of output currents was measured to be $0.38{\mu}A/^{\circ}C$ and $0.39{\mu}A/^{\circ}C$, respectively. And also, the power dissipation is 0.84mW on 2V voltage supply. These results are verified by the $0.18{\mu}m$ n-well CMOS parameter.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.731-735
• /
• 2008

The coliform group, Salmonella typhimurium and Staphylococcus were analyzed for eliminating of microorganism spore which could be embeded in honey and eradication of studied for heat resistance of thermoacidophilic bacteria was studied for marketing of honey after producing honey drink. The method for analyzing of heat resistance thermoacidophilic bacteria was membrane-seperated cell culture with $0.45\;{\mu}m$ micro-filter and vacuum aspirator. The results of bacteria, coliform group, Salmonella typhimurium and Staphylococcus was negative, but normal method such as sterilization with electrolyzed water, normal micro-filter, high-temperature heating and microwave did not have effect on heat resistance thermoacidophilic bacteria. Also, absolute type micro-filter of $0.45\;{\mu}m$ and $0.8\;{\mu}m$ microfilteration showed higher effect on heat resistance thermoacidophilic bacteria than micro-filter of normal type, showing negative results at all treatments.