• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.638-638
• /
• 1989

It has been very important in various industry fields to improve the fatigue strength characteristics of bearings such as bearing life, fatigue limit, etc., because such poor properties could result in shortening the machinery life as well as in decreasing the accuracy. However, no successful heat treatment criterion seems to be available at present. In this study, the effect of the $170^{\circ}C\times120min$ tempering cycles repeated after $380^{\circ}C\times80min$ oil quenching for $800^{\circ}C$ spheroidizing-annealed bearing steel (STB2) as base metal on the $120^{\circ}C$ high temperature rotary bending fatigue strength characteristics were investigated, including the effects on hardness, Charpy impact value and micro-structure, in order to seek for the best heat treatment condition finally. The important results obtained are as follows : 1) The optimal cycle of tempering so that the fatigue strength .sigma. could become the highest was the 4th cycle. And it is confirmed that this $\sigma_{F}$ is about 6 times more increased than that of base metal, and about 1.3 times more increased than the case of the 1 cycle tempered. 2) As a result of the investigation for the effects of tempering cycles on hardness, the hardness at the tempering number of 2 thru 5 cyles was not decreased severely ; only about 10% decrease from those of the quenched and 1 cycle tempered case. Such hardness is equivalent to $H_{R}$/C61-62 with no bad effect on anti-abrasion of bearing steel. 3) In the case of 2 thru 5 cycle tempering as well as 1 cycle tempering, the impact value was not so improved comparing with the case of quenching, but an increase of 5 to 10% could be expected at least. 4) It was experimentally confirmed that the control of the mechanical properties improvement such as fatigue strength and fatigue life for bearing steels could be possible by the number of tempering cycles.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.4
• /
• pp.121-135
• /
• 2004

This study aims to analyze the oral health status of the elderly. Study subjects were 9,340 elderly aged over 65 who took the health examination (the first) for the local insured when the National Health Insurance Corporation carried out its survey from January to December, 2002. The subjects took an oral examination and filled in the questionnaire. Major results from the analysis are as follows: 1. Analysis of Oral Health Behavior For oral health behavior, 38.2％ of total subjects had visited a dental hospital (or clinic) in the last one year in the order of the elderly of big cities (48.3％), the elderly of medium cities (43.9％), and the elderly of rural areas (29.0％)(P<0.001). Elderly men had a higher rate than elderly women, and the younger age had a higher rate(P<0.01). For experience of oral prophylaxis, 12.3％ of the total elderly had experienced it in the order of the elderly of big cities (18.8％), the elderly of medium cities (16.0％), and the elderly of rural areas (6.4％) (P<0.001). For elderly men, the younger age had a higher rate of oral prophylaxis. The number of toothbrushing in order was twice(47.5％), once (26.7％), three times (25.0％), and none (0.7％). The younger age brushed their teeth more often (P<0.001). 2. Analysis of Oral Health Status The rate of caries was 10.6％ of the elderly surveyed. By area, the elderly of rural areas had a higher rate of caries than the elderly of cities (p<0.001) and elderly men were higher than elderly women (p<0.001). By age, many elderly aged over 80 had more than two caries. For missing teeth, the elderly of rural areas had a higher rate than the elderly of cities (p<0.001) and the older age had a higher rate(p<0.001). The rate of periodontal disease was 43.2％ of the total elderly. By area, the elderly of big cities (46.2％) had a higher rate of periodontal disease than the elderly of medium cities (39.4％) and rural areas (43.6％)(p<0.001), and elderly men (46.4％) were higher than elderly women (40.2％)(p<0.001). By age, the lower age had a higher rate of peridontal disease (p<0.001). Dental abrasion was observed in 16.9％ of the total elderly. The elderly of cities (21.0％) had a higher rate than the elderly of rural areas (12.0％)(p<0.001) and elderly men (21.3％) were higher than elderly women (12.8％)(p<0.001). Also the lower age had more dental abrasion symptoms (p<0.001). For needing a denture, the rate among the elderly was 48.5％ and was higher for the elderly of rural areas(20.9％), than the elderly of big cities(7.0％) and medium cities (10.5％)(p<0.001). For the rate of denture wearing, the elderly of rural areas(41.8％) were higher than the elderly of big cities (27.7％) and medium cities (28.2％ )(p<0.001). For the relation of drinking and smoking to oral health, the elderly who had a higher frequency of drinking, had a higher rate of caries (p<0.001)periodontal disease(p<0.001) and missing teeth(p<0.001) Smokers had a higher rate of caries (p<0.001), periodontal disease (p<0.05), and missing teeth (p<0.001) than nonsmokers.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.230-237
• /
• 2006

Copolymers(HSA-98-20, HSA-98-0, HSA-98+20) which we acrylic resin containing 80% solid content were synthesized by the reaction of monomers, including methyl methacrylate, n-butyl acrylate, and 2-hydroxyethyl acrylate with a functional monomer, acetoacetoxyethyl methacrylate (AAEM), which nay give improvements in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, containing AAEM, are as follows viscosities, $1420\sim5760cps$ ; number average molecular weight, $2080\sim2300g/mol$; polydispersity index, $2.07\sim2.19$ ; and conversions, $88\sim93%$. In the next step, high-solid coatings (HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined on the film coated with the prepared high-solid coatings. The introduction of AAEM to the coatings enhanced the abrasion resistance and solvent resistance, which indicated the possible use of high- solid coatings for top-coating materials of automobile. Since the curing by viscoelastic measurement occurred in sequence of HSA-98+20C > HSA-98-0C > HSA-98-20C, it was concluded that the curing rates became faster with incresing $T_g$ values.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.393-400
• /
• 2012

In recent years, nano-structured thin film systems are often applied in industries such as MEMS/NEMS device, optical coating, semiconductor or like this. Thin films are used for many and varied purpose to provide resistance to abrasion, erosion, corrosion, or high temperature oxidation and also to provide special magnetic or dielectric properties. Quite a number of articles to evaluate the characterization of thin film structure such as film density, film grain size, film elastic properties, and film/substrate interface condition were reported. Among them, the evaluation of film adhesive to substrate has been of great interest. In this study, we fabricated the polymeric thin film system with different adhesive conditions to evaluate the adhesive condition of the thin film. The nano-structured thin film system was fabricated by spin coating method. And then V(z) curve technique was applied to evaluate adhesive condition of the interface by measuring the surface acoustic wave(SAW) velocity by scanning acoustic microscope(SAM). Furthermore, a nano-scratch technique was applied to the systems to obtain correlations between the velocity of the SAW propagating within the system including the interface and the shear adhesive force. The results show a good correlation between the SAW velocities measured by acoustic spectroscope and the critical load measured by the nano-scratch test. Consequently, V(z) curve method showed potentials for characterizing the adhesive conditions at the interface by acoustic microscope.

• Journal of Chest Surgery
• /
• v.38 no.5 s.250
• /
• pp.371-376
• /
• 2005

Background: Retrospective study was carried out on patients with primary spontaneous pneumothorax with the aim of determining if conventional thoracoscopic wedge resection is superior to modified transaxillary minithoracotomy with thoracoscopy in the surgical treatment. Material and Method: 160 patients, aged 14 to 35 years with primary spontaneous pneumothorax were involved in this study. Patients were assigned to two groups by surgical technique; Conventional thoracoscopic wedge resection (group A; n=80) and modified transaxillary minithoracotomy with thoracoscopy (group B; n=80). Apical pleural abrasion & talc poudrage were performed in all cases. This study evaluated the following factors: duration of operation, days of analgesics used after operation, number of no air leak on the first postoperative day, duration of indwelling chest tube, hospital stay, postoperative complications, chronic chest pain (during follow-up) and resumption of normal activity. Relapses (ipsilateral recurrence after discharge) during follow-up periods were evaluated. Result: No significant differences were found in any of the factors studied in either group. Conclusion: Conventional thoracoscopic wedge resection and modified transaxillary minithoracotomy with thoracoscopy offer similar results in the surgical treatment of primary spontaneous pneumothorax. The rate of complication is low and the level of pain is acceptable without long-term sequele. Therefore, modified transaxillary minithoracotomy with thoracoscopy method appears as a valuable alternative surgical technique.

• Journal of Periodontal and Implant Science
• /
• v.32 no.4
• /
• pp.857-864
• /
• 2002

The aim of this study is to investigate the end of filaments of the different toothbrushes in the market through the stereomicroscope and to evaluate the % of rounded-end filaments considered to be acceptable. 9 brands, total 11 type toothbrushes were tested. 2 toothbrushes of each type which is marked as rounded-end filaments were tested. The toothbrushes which are not marked as rounded-end filaments were excluded. The domestic as well as foreign toothbrushes which are familiar to consumers were tested. 2 tufts of each toothbrushes were cut and examined by stereomicroscope using $40{\times}$ magnification. The procedure was carried out with blind-technique, and the digital photographs were taken. Besides the % of rounded-end filaments, total tufts number, material of the tuft, stiffness, and other special characteristics were recorded. By the classification of Silverstone and Featherstone, rounded-end filaments were examined and counted. The results shows that there are different range of rounded-end filaments according to the toothbrush types(17.7%-91.2%). Atman toothbrush has the most rounded-end filaments(91.2%) among the observed toothbrushes, and the Advantage Plus(Ora1-B) has the next(86.75%). E-Clean #411 has the least(17.70%) and E-Clean #410 of the same brand has also low % rounded-end filaments(20.60%). While G.U.M #409(Butler) has 67.90% rounded-end filaments, G.U.M #471 of the Same brand has comparative low 41.83% rounded-end filaments. 4 types of total 11 have the rounded-end filaments over 80%, however other 4 types have under even 50%. Considering that the correct brushing habit with a toothbrush which has rounded-end filaments can protect the gingival injury and tooth abrasion, it is thought that we dentists need to give the correct information about toothbrush to the patients

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.51-70
• /
• 1999

Dental porcelain is one of the materials of choice for restoration where esthetics is of concern, but has a considerable potentials of wear. The wear of enamel is variable when opposed by different porcelain systems and surface conditions, and the exposed dentine and opaque porcelain due to clinical failure is expected to have high potentials of wear. The purpose of this study was to investigate the wear effects of self-glazed, polished incisal porcelain. polished dentine and opaque porcelain against human enamel in the laboratory by use of a pin-on-disk type wear tester. 4 types of dental porcelain($Vita-{\Omega}$, Ceramco-II, Vintage powder $Vita-{\alpha}$ of In-Ceram system) and type IV gold alloy as cotrol group were used for test specimens. Intact buccal cusps of maxillary premolar were used for enamel specimens, and the cusp converged to a point and was devoid of visible abrasion, caries, decalcification. The upper part was the cusp of a maxillary premolar and the lower part was a porcelain specimen. The enamel wear was deter-mined by weighing the cusp before and after each test. Surface profilometer was used to quantitate wear of the porcelain specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows : 1 Self-glazed porcelain produced more enamel wear than polished porcelain, especially the enamel wear of $Vita-{\alpha}$ self-glazed porcelain was 3.2 times more than that of other groups. 2. Opaque porcelain produced least porcelain wear, $Vita-{\alpha}$ self-glazed porcelain produce greatest porcelain wear, but there was no statistically significant difference between the groups(p>0.05). 3. The enamel wear of dentine porcelain was 3.8 times more than that of polished inisal porcelain(p<0.05), and the enamel wear of opaque porcelain was 1.9 times more than that of polished inisal porcelain, but there was no statistically significant difference between the groups(p>0.05) 4. Overglazed porcelain produced less enamel wear than self-glazed porcelain, and more enamel wear than polished porcelain, but there was no statistically significant difference between the groups(P>0.05). 5. The hardness number of $Vita-{\Omega}$ dentine and Ceramco-II opaque porcelain was larger, but that of Vintage dentine and $Vita-{\alpha}$ self-glazed porcelain was similar to other groups. 6. Examination of SEM photographs revealed that overglazed porcelain had smoother surface than self-glazed porcelain, and self-glazed porcelain had smoother surface than polished porcelain. Much polishing scratches and larger porosities were observed on the opaque porcelain specimen, and much polishing scratchess and small porosities were observed on the dentine porcelain specimen.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.50-80
• /
• 2021

This paper critically examines the history of the theories connected to the Wongaksa Temple Pagoda that have developed over the last 100 years focusing on the original number of stories the pagoda would have reached. Part II of this paper retraces the dynamic process of the rediscovery of the Wongaksa Temple Pagoda by Westerners who traveled to Korea during the port-opening period. Koreans at the time viewed the Wongaksa Temple Pagoda as an object of no particular appeal or even as an eyesore. However, Westerners appreciated it as a wonder or magnificent sight. Since these Westerners had almost no prior knowledge of Buddhist pagodas, they were able to write objective travelogues. At the time, these visitors generally accepted the theory common among Joseon intellectuals that Wongaksa Temple Pagoda once had thirteen stories. Part III focuses on Japanese government-affiliated scholars' academic research on the Wongaksa Temple Pagoda after the proclamation of the Korean Empire and the Japanese Government-General of Korea's subsequent management of the pagoda as a cultural property during the colonial era. It also discusses issues with Japanese academic research and management. In particular, this portion sheds light on the shift in theories about the original number of stories of the Wongaksa Temple Pagoda from the ten-story theory supported by Sekino Tadashi (關野 貞), whose ideas have held a great influence on this issue over the last 100 years, to the thirteen-story theory and then to the idea that it had more than thirteen. Finally, Part IV addresses the change from the multi-story theory to the ten-story theory in the years after Korea's liberation from Japan until 1962. Moreover, it highlights how Korean intellectuals of the Japanese colonial era predominantly accepted the thirteen-story theory. Since 1962, a considerable quantity of significant research on the Wongaksa Temple Pagoda has been published. However, since most of these studies have applied the ten-story theory suggested in 1962, they are not individually discussed in this paper. This retracing of the history of theories about the Wongaksa Temple Pagoda has verified that although there are reasonable grounds for supporting the thirteen-story theory, it has not been proved in the last 100 years. Moreover, the number of pagoda stories has not been fully discussed in academia. The common theory that both Wongaksa Temple Pagoda and Gyeongcheonsa Temple Pagoda were ten-story pagodas was first formulated by Sekino Tadashi 100 years ago. Since the abrasion of the Wongaksa Temple Stele was so severe the inscriptions on the stele were almost illegible, Sekino argued that the Wongaksa Temple Pagoda was a ten-story pagoda based on an architectural analysis of the then-current condition of the pagoda. Immediately after Sekino presented his argument, a woodblock-printed version of the inscriptions on the Wongaksa Temple Stele was found. This version included a phrase that a thirteen-story pagoda had been erected. In a similar vein, the Dongguk yeoji seungnam (Geographic Encyclopedia of Korea) published by the orders of King Seongjong in the late fifteenth century documented that Gyeongcheonsa Temple Pagoda, the model for the Wongaksa Temple Pagoda, was also a thirteen-story pagoda. The Wongaksa Temple Stele erected on the orders of King Sejo after the establishment of the Wongaksa Temple Pagoda evidently shows that Sekino's ten-story premise is flawed. Sekino himself wrote that "as [the pagoda] consists of a three-story stereobate and a ten-story body, people call it a thirteen-story pagoda," although he viewed the number of stories of the pagoda body as that of the entire pagoda. The inscriptions on the Wongaksa Temple Stele also clearly indicate that the king ordered the construction of the Wongaksa Temple Pagoda as a thirteen-story pagoda. Although unprecedented, this thirteen-story pagoda comprised a ten-story pagoda body over a three-story stereobate. Why would King Sejo have built a thirteen-story pagoda in an unusual form consisting of a ten-story body on top of a three-story stereobate? In order to fully understand King Sejo's intention in building a thirteen-story pagoda, analyzing the Wongaksa Temple Pagoda is necessary. This begins with the restoration of its original name. I disprove Sekino's ten-story theory built upon flawed premises and an eclectic over-thirteen-story theory and urge applying the thirteen-story theory, as the inscriptions on the Wongaksa Temple Stele stated that the pagoda was originally built as a thirteen-story pagoda.

• Journal of Chest Surgery
• /
• v.42 no.3
• /
• pp.337-343
• /
• 2009

Background: Postoperative recurrence is a major problem after performing video-assisted thoracic surgery for the treatment of primary pneumothorax. This study was designed to evaluate the efficacy and safety of a bioabsorbable staple line reinforcement (GORE $SEAMGUARD^{(R)}$) for preventing recurrence after bullectomy. Material and Method: From January 2000 to December 2004, 300 patients underwent video assisted thoracoscopic surgery for the treatment of primary penumothorax. 143 patients were treated with bioabsorbable staple line reinforcement (Group A) and 142 patients were treated with stapling of the bullae (Group B). Mechanical pleural abrasion was performed in all the patients. The operating time, the duration of the indwelling chest tube, the length of the hospital stay and the number of recurrences after operation were compared between the groups. Result: No operative deaths occurred. The conversion rate to an open procedure was 5% (15/300). Comparison with these groups (Group A versus Group B) showed the following results: the operating time ($49.6{\pm}25.6$ vs $51.8{\pm}30.4$ minutes, respectively, p=0.514), the duration of an indwelling chest tube ($5.8{\pm}2.5$ vs $7.2{\pm}3.3$ days, respectively, p<0.005), the hospital stay ($10.9{\pm}4.3$ vs $12.5{\pm}4.3$ days, respectively, p<0.005) and the number of recurrences (14 (9.8%) vs 10 (7.0%), respectively, the over all rate: 8.4% p=0.523), and the mean follow up period. ($48.1{\pm}36.6$ vs $36.5{\pm}24.4$ months, respectively). Conclusion: There were advantages to use synthetic absorbable staple line reinforcement over the usual method for the treatment of primary pneumothorax in regard to the duration of an indwelling chest tube and the hospital stay, but here was no significant difference between the groups for postoperative recurrence.