• 터널과지하공간
• /
• 제25권6호
• /
• pp.534-542
• /
• 2015

대심도 시추공사는 시추비트의 마모로 인해 발생하는 라운드트립(round trip)이 이산적으로 발생된다. 라운드트립은 심도가 깊어질수록 교체에 소요되는 시간이 증가하여 공사 성능에 많은 영향을 끼친다. 따라서 시추 프로젝트의 타당성분석 및 관리 효율화를 위해서는 라운드트립의 신뢰적인 예측기술이 확보되어야 한다. 이승수 등(2013)은 TOSA(round trip occurrence simulation algorithm)을 제시하여 비트의 마모단계별 라운드트립이 발생되는 깊이와 시점을 분석할 수 있는 알고리즘을 제시하였다. 그러나 시뮬레이션 구간의 수가 증가할수록 시뮬레이션 횟수가 기하급수적으로 증가하여 연산시간이 오래 걸린다는 단점을 가지고 있다. 본 연구에서는 유전자 알고리즘을 활용하여 단 시간에 TOSA를 통한 최적화된 라운드트립의 발생을 예측할 수 있는 모듈을 개발하고 검증한 내용에 대하여 소개한다.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.11-20
• /
• 2013

PURPOSES : This study is to suggest time to spray curing compound, the amount of curing compound, and the number of times to spray curing compound based on indoor tests. METHODS : Based on the literature review, two methods are used in this study, One is test for water retention of concrete curing material and the other is test for abrasion resistance of concrete surfaces by the rotating-cutter method. Through those methods, curing compound was evaluated. RESULTS : The result of the laboratory experiment for time to spray curing compound indicates that 30 minutes after placing concrete is optimal. For the amount of curing compound, $0.5{\ell}/m^2$ is the minimum quantity for both concretes. Through test of the number of times to spray curing compound, method to spray the whole amount of curing compound in twice is more efficient than it to spray the whole amount at a time. Also, method of separately 30-50 minutes spray is better than method of separately 10-30 minutes spray. CONCLUSIONS : From the testing results, it can be proposed that optimum time to curing compound is $30{\pm}15$ minutes, $0.5{\ell}/m^2$ is efficient for spraying the whole amount of curing compound at a time, and $0.4{\ell}/m^2$ is the best for spraying the whole amount of curing compound in twice, which sprays it in 20 minutes after 30 minutes from placing concrete.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.475-488
• /
• 2017

암반용 TBM 공사에서 디스크 커터의 마모도 예측은 설계 및 시공 단계에서 정확한 공사비와 공사기간을 추정하는데 중요한 요소이다. 디스크 커터 마모도 예측에 널리 사용되고 있는 방법으로는 CSM 모델, 노르웨이 NTNU 모델, Gehring 모델이 있으며, 이들 모델은 각각 세르샤 시험, NTNU 시험 결과로부터 도출된 디스크 커터의 마모지수와 수명 지수를 활용하고 있다. 세르샤 시험은 금속 핀을 이용하여 일방향으로 마모를 발생 시키기 때문에 광물 입자크기나 암석의 이방성에 따라 결과의 편차가 큰 것으로 조사되었다(SINTEF, 2013). 한편, NTNU 시험의 경우에 시료 성형을 위한 사전 작업이 필요하기 때문에 수행 완료까지 2~3일의 기간이 소요된다. 본 연구에서는 금속 디스크의 회전과 이와 직교되는 방향으로 이동하면서 양방향 마모를 발생시켜 마모시험 결과의 편차를 줄이고, NTNU 시험 대비 별도의 시료성형이 필요 없어 소요 시간을 1~2시간으로 단축할 수 있는 새로운 디스크 커터 마모도 예측시험과 이를 이용한 마모지수를 제안하였다. 제안된 마모 지수는 동일 암석을 이용한 세르샤 시험과 NTNU 시험결과와 비교하여 높은 상관관계를 갖는 것으로 나타났다. 또한 국내 외 TBM 현장의 암석 시편을 이용하여 시험결과와 현장의 실제 디스크 커터 마모량을 비교 검증하였으며, 95%의 높은 결정계수를 확인하였다. NAT 시험은 신속하게 시험 수행이 가능하고, 시험 결과로부터 제안된 마모지수가 높은 신뢰수준을 보이는 것으로 판단되어 향후 활용도가 높을 것으로 기대한다.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1720-1729
• /
• 2001

Wear characteristics of Nylon and acetal pinions against steel gears for different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition. Specific wear rate was measured as a function of tooth number, module, tooth width and total revolution. The worn tooth surfaces were examined with a profile projector. The Nylon pinion showed lower specific wear rate than the acetal pinion. However, the Nylon pinion was fractured at high tooth loads, whereas the acetal pinion exhibited a steady wear behavior. The wear characteristics of Nylon pinion varied significantly with the Pitch line velocity. Wear occurred most severely at the tooth tip and the region immediately below the pitch line of pinion. The dominant wear mechanisms were adhesion and abrasion.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.81-87
• /
• 2008

C-Hook is a kind of conveyer system for transporting steel coil in POSCO. To detect the current position and the trajectory of steel coils in a plant, C-Hooks are tracked by an inspection system based on PLC. The inspection system detects transit of C-Hooks by monitoring a physical contact between steel bars on a C-Hook and the inspection sensors. However, this system is not reliable because of the abrasion, damage and aging. Moreover, the number of distinguishable C-Hooks is limited by the number of combination of steel bars on a C-Hook. It means that more steel bars should be installed for distinguishing the more C-Hooks. Therefore, the conventional system is difficult and expensive to maintain. To overcome these problems, we propose a C-Hook identification system that uses RFID which is a non-contact type identification system, and evaluate its performance and applicability from a new monitoring program that operates along with the conventional system in the real environment of POSCO.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.647-651
• /
• 2016

The power relay can easily control high voltage and high current through metallic contacts. In addition, it has the advantage in reasonable price. So it has been used in many applications. But the power relay has a weak point by mechanical movements. These mechanical movements cause the bouncing phenomenon. Arc and bouncing phenomenon are the main causes of electric abrasion and material erosion. In this study, mechanical repetitive experiments and repetitive experiments in electrically connected state are conducted. Then these two experimental results in terms of bouncing phenomenon and changes in the contact surface are compared. In all number of repetitions, contacts in an electrically connected state cause smaller number of bounce. Also, It has lower contents of silver on eroded surface than the other. The experimental results would be helpful to the further study of contacts life span.

• 대한정형도수물리치료학회지
• /
• 제5권1호
• /
• pp.75-80
• /
• 1999

The Taekwondo being a martial sports, there are higher chances for the injury to occur than the non martial sports. Therefore, this study analyze the frequency, the area, the type, and the condition of the injury which are prone to occur in the Taekwondo matches; it is to help the Taekwondo players in prevention of the injury and in treatment. The subjects of this study were the 48 players (male 24, female 24) who participated in the final selection contest of the national team player on March 9 to 12, 1993. The data of the injury were obtained from the medical recoder staff and were analyzed to the frequency of the injury per match, the vulnerable area of the injury, the type of injury, and the condition of the injury with a gender difference. There were 24 matches for the male and 24 matches for the female, total 48 matches. Therefore, the total participation number of the players are the double of the match number. 1. The frequency of the injury per match was 18.3%(11/60) for male and 23.1%(12/52) for women. 2. The areas of the injury were ankle 36.4%(4), foot 18.2%(2), knee 18.2%(2), lower leg 18.2%(2), wrist 9.1%(1) in male; foot 33.4%(4), ankle 16.7%(2), knee 16.7%(2), lower back 16.7%(2), lower leg 8.3%(1), face 8.3%(1) in female. 3. The types of the injury were contusion 45.5%(5), sprain 27.3%(3), abrasion 9.1%(1), laceration 9.1%(1), tendon rupture 9.1%(1) in male; contusion 33.3%(4), sprain 33.3%(4), abrasion 16.7%(2), subcutaneous hemorrhage 8.3%(1), dislocation 8.3%(1) in female. 4. The condition of the injury were the unblocked attack 36.4%(4), attacking kick 27.3%(3), blocking a kick 18.2%(2), attacking punch 9.1%, impact with surface 9.1%(1) in male; attacking kick 33.3%(4), unblocked attack 25%(3), blocking a kick 25%(3), attacking punch 8.3%(1), impact with surface 8.3%(1) in female. This study shows that the injury from the Taekwondo matches occurred most in the lower extremity joints and the foot, and shows that the most of the injury types were contusion and sprain. Therefore, it is believed to be helpful to wear the proper fitting ankle or the knee protector and using other protective equipment to prevent the sports injury in the Taekwondo matches.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.562-570
• /
• 2010

This study was conducted to estimate the number of disc cutter consumption and to predict amount of disc cutters when a shield TBM(Tunnel Boring Machine) of the Han Riverbed Tunnel was applied. In fact, it is almost impossible to change the machine after starting the excavation using the shield TBM method. Therefore, it is important to design an appropriate equipment in the shield method - an efficiency choice of the operation equipment plays a key role in the shield tunnel processing. For the above reason, the disc cutter consumption prediction is quite important so that the detailed analysis is required. A number of disc cutter consumption was predicted by the three methods, viz. KOMATSU, MITSUBISHI and NTNU. In addition, the predicted results were compared with field data. The prediction of disc cutter consumption showed that 237 for KOMATSU, 501 for MITSUBISHI, and 634 for NTNU, respectively. However, a total number of 1,263 disc cutter consumption were investigated during the tunnel construction. It was found that there was a huge difference between the predicted and real values of the disc cutter consumption. The more detailed investigation showed that the disc cutter was worn out bluntly in the northbound tunnel, meanwhile it was worn out sharply in the southbound tunnel. In particular, the disc cutter consumption in the southbound tunnel was increased rapidly because of rear abrasion for remaining mucks in the chamber.

• 대한화학회지
• /
• 제23권6호
• /
• pp.412-416
• /
• 1979

폴리프로필렌纖維는 他纖維에 比하여 機械的, 化學的性質이 매우 優秀하나 難染性 때문에 衣料用으로는 別로 쓰여지지 않고 있다. 폴리프로필렌의 染色性을 向上시키기 爲한 많은 硏究와 特許가 나와있으나 이들 大部分은 纖維의 개질등에 의한 방법으로서, 纖維에 직접, 견고한 染色을 할 수 있는 染料의 硏究는 거의 없다. 著者들은 카르벤을 生成시키므로써 他 纖維에는 勿論 폴리프로필렌纖維에 直接 染色될 수 있는 새로운형의 反應性染料를 合成하였다. 卽 알데히드基를 가지는 分散染料와 토실히드라진으로부터 合成한 새로운 反應性染料로서 폴리프로필렌을 染色한 結果, 濃色의 堅固한 染色物을 얻을 수 있었다.

• 한국임상수의학회지
• /
• 제13권2호
• /
• pp.144-148
• /
• 1996

The effectiveness of sodium carboxymethylcellulose (SCMC) and deztran in the prevention of adhesion formation on the uterus and embryo collection in rabbits was elucidated. Following induction of adhesion on uterus and uterine horns by abrasion and retrograde flushing of embryos in gonadotropins primed rabbits, the solutions of saline (for control), 1% SCMC, 10% dextran and a synthetic solution of 1% SCNC and 10% dextran in saline were infused in the abdominal cavity at the dose of 5 ml/kg of body weight. The average percentage of adhesion was 11.1, 28.6, 41.7 and 73.3% in the rabbits infused with the synthetic, 1% SCMC, 10% dextran and saline solutions, respectively. The synthetic solution was more effective than other solutions in the rabbits. The average number and recovery rate of embryos were significantly (P<0.01) higher in the synthetic solution group than 1% SCMC, 10% dextran or saline solution groups. Among the collected embryos in the groups, the distribution of the normal embryos was higher in the synthetic solution group (99%) and the 10% dextran solution group (95.7%) than the 1% SCMC solution group (78.4%) and saline (66.2%). Theretore, a synthetic solution which is combined with 1% SCMC and 10% deztran in saline can be effectively used for the prevention of adhesion formation after uterine surgery and embryo collection.