• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.888-891
• /
• 2000

Drilling is one of the most important operations in machining industry and usually the most efficient and economical method of cutting a hole in metal. From automobile parts to aircraft components, almost every manufactured product requires that holes are to be drilled for the purpose of assembly, creation of fluid passages, and so on. It is therefore desirable to monitor drill wear and hole quality changes during the hole drilling process. One important aspect in controlling the drilling process is drill wear status monitoring. With the monitoring, we may decide on optimal timing for tool change. The necessity of the detection of tool wear, fracture and the abnormal tool state has been emphasized in the machining process. Accordingly, this paper deals with the cutting characteristics of the hot-rolled high strength steels using common HSS drill. The performance variables include drill wear data obtained from drilling experiments conducted on the workpiece. The results are obtained from monitoring of the cutting force and Acoustic Emission (AE) signals, and from the detection of the abnormal tool state with the computer vision system.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.199-206
• /
• 2010

매트릭스 컨버터는 3상의 입력 전원이 전력용 반도체 스위치의 제어를 통해 3상의 부하에 직접 연결되는 에너지 변환 장치이다. 에너지 저장을 위한 직류단이 없어 매트릭스 컨버터의 입력 전류는 부하 전류와 스위치 상태에 직접 의존한다. 그러므로 불평형 또는 왜곡된 입력 전압은 원치 않은 출력 고조파 전류의 원인이 된다. 본 논문에서는 매트릭스 컨버터의 입력 전원 외란 상황에서 출력 전류를 개선하는 신경회로망 기반 전류 보상기를 제안한다. 제안된 기법 타당성과 유효성을 시뮬레이션과 실험을 통해 증명한다.

• International Journal of Korean Welding Society
• /
• 제1권2호
• /
• pp.1-6
• /
• 2001

A weld quality assessment method is proposed in this work, which can be applied to the short-circuit mode in GMAW. Information about the welding signal trajectory, distribution of the signal duration at each sub-regions and short-circuit frequency is used to evaluate the weld quality. The weighted penalty, which is determined experimentally, is imposed for each abnormal signal. Performance of the proposed method is compared with the Simpson's method under the conditions of shielding gas reduction, workpiece surface contamination and joint gap in the butt and fillet welds. Although the proposed method predicts the weld quality with reasonable accuracy, further modification and extension to other metal transfer modes are needed as a further study.

• Architectural research
• /
• 제18권4호
• /
• pp.129-136
• /
• 2016

People have experienced physical problems including vision problems with aging; some are normal and some are abnormal. When they have abnormal and impaired vision, they have a lower level of life satisfaction than their sighted peers. For the elderly with sight loss, well-designed housing could be an important indicator for their quality of life. Housing adjustment and modification could help the elderly cope with sight loss, do daily activities more independently, and lead to better quality of life. The purpose of this study is to investigate housing conditions for the elderly with vision impaired, state of housing adjustment or modifications, and the effects of housing conditions on the wellness of the elderly in Korea. For this study, 18 housing cases were investigated and a total number of 65 visually impaired people aged over 55 participated. Housing condition of those participated was poor. Most observed home hazards are level differences in living areas, obstacles in the hallway, confined space that is not allowed structural modification, swing doors from wardrobe or cabinets, color contrast, poor lightings, and etc. Majority of households participated in this study did not make modification or refurbishments, rather many of them tend to adapt themselves to their residential environments. Older adults living in better housing condition and under less difficult environments are likely to have higher life satisfaction. The effects of housing condition on wellness could be more influential when individual capabilities (e.g. health condition) are weaker. The findings underline that with intervention of individual characteristics, the effects of housing and physical environment on negative outcomes of vision loss would get ameliorated or reduced.

• 한국항공우주학회지
• /
• 제42권4호
• /
• pp.344-350
• /
• 2014

한국형 기동헬기(KUH) 다기능시현기(MFD)는 임무/시현계통을 구성하는 장비로서, 항공기 운용 중에 임무컴퓨터(MC)로부터 영상정보(항법, 비행, 생존, 전자지도 및 정비 관련 정보)를 입력받아 시현한다. 이러한 다기능시현기는 조종사가 임무를 수행하는데 있어 핵심적인 장비이며, 시현화면 제어 기능, 데이터 시현 기능, 자체진단 기능, 밝기조절 기능을 가지고 있다. 본 논문에서는 다기능시현기의 이상시현(MFD 4 Flickering) 현상이 발생한 원인을 분석하고, 이 현상에 대한 설계 개선사항을 정리하였다. 또한, 설계 개선사항에 대한 체계 안전성 분석 결과와 비행/지상시험 검증 결과를 함께 기술하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.287-289
• /
• 2009

This paper deals with a parallel processing uninterruptible power supply (UPS) for sudden voltage fluctuation in computer applications to integrate power quality improvement, load voltage stabilization and UPS. To reduce the complexity, cost and number of power conversions, which results in higher efficiency, only one voltage-controlled voltage source inverter (VCVSI) is used. The system provides sinusoidal voltage at the fundamental value of 220V/60Hz for the load during abnormal utility power conditions or grid failure. Also, the system can be operated to mitigate the harmonic current and voltage demand from nonlinear loads and provide voltage stabilization for loads when sudden voltage fluctuation occur, such as sag and swell. System operation simulation demonstrates that the system protects against outages caused by abnormal utility power conditions and sudden voltage fluctuations and changes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.350-354
• /
• 1995

The Tension Leveller of Cold Rolling Mill In POSCO performs levelling the strip in high speed line. But minor variations in operating condition of driving machines such as motor, gear box, and support bearings, a small gap-variation of supporter and strip slip by poor roll revolutions can cause serious problems in the quality of strip. In this study, firstly, A condition monitoring standard for each sensor is made through with the detail analysis of vibration and strip slip. Secondly, An automatic monitoring and diagnosing system was developed to monitor the condition of Tension Leveller, and diagnose the cause of abnormal condition. Finally, A diagnosing algorithm for abnormal condition and man-machine interface (MMI) for easy operation are developed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제10권1호
• /
• pp.25-29
• /
• 1987

To compensate density of abnormal lung field for density of normal lung field, used each cellulose paper calculated sensitometry and contrast. As apply clinic part to the result: We are able to compensate density of abnormal lung that is pleural effusion atelectasis, etc for normal lung. We believe this method is good one because the method is simple to change exposure and the material is cheap enough to be accessible to every one and easily buyable and we need not be afraid of loss of image quality.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.118-123
• /
• 2004

The compressor has one of important roles in refrigeration cycle and it determines refrigeration efficiency and quality This paper aims to monitor rotary compressors for room air conditioners by using Acoustic Emission(AE) technique. The reliability of rotary compressors has been evaluated through visual inspection on them after long term test. This paper describes methods for acquisition and processing AE raw signal to monitor the state of rotary compressor. A detecting method of abnormal compressor in real time is suggested and special-purpose monitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor at low cost.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.317-323
• /
• 1999

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Many research has been conducted to manipulate field vibration signal data for diagnosing the fault of designated machinery. As the pattern recognition tool of that signal, neural network which use usually back-propagation algorithm was used in the diagnosis of rotating machinery. In this paper, self-organizing feature map(SOFM) which is unsupervised learning algorithm is used in the abnormal vibration diagnosis of rotating machinery and then learning vector quantization(LVQ) which is supervised teaming algorithm is used to improve the quality of the classifier decision regions.