• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.9-17
• /
• 1994

ATM (Asynchronous Transfer Mode) has a fixed-length packet transport scheme. It is one of the promising proposals in B-ISDN.Since the packet length is fixed, it can be potentially to perform the various service to users. In this paper, a queueing model for an ATM multip`exer loaded by CBR and ON/OFF input sources is considered, and the two-queue system which each type of input sources has a queue with a finite capacity is analyzed. The cell loss probabilities for a performance measures of ATM multiplexer are derived, and are also evaluated through numerical examples. As a result, the cell loss probability of ON/OFF sources for the queue size is rapidly decreased when the multiplexed number and burstiness are increased. Since cells of the CBR source have lower priority than cells of the ON/OFF source, cell loss probabilities of CBR sources are accordingly high independently of CBR cell arrival rate when the number of CBR sources is large.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.229-244
• /
• 1997

Realization of the economical, reliable, and efficient ATM interface block becomes an important key to development of the ATM switching system when we consider new issues raised recently. In this paper, we summarize requirements for the ATM interface block and present the UNI (User Network Interface)/NNI (Network Node Interface) architecture to meet these requirements. We also evaluate the performance of the multiplexer adopting the various multiplexing schemes and service disciplines. For ATM UNI/NNI interface technologies, we have developed a new policing device using the priority encoding scheme. It can reduce the decision time for policing significantly. We have also designed a new spacer that can space out the clumped cell stream almost perfectly. This algorithm guarantees more than 99 % conformance to the negotiated peak cell rate. Finally, we propose the interface architecture for accommodation of the ABR (Available Bit Rate) transfer capability. The proposed structure that performs virtual source and virtual destination functions as well as a switch algorithm can efficiently accommodate the ABR service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.596-601
• /
• 2005

In this paper it is focused on the relation between CLR(Cell Loss Ratio) and blocking probability in the wireless ATM access transport. Traffic model of wireless ATH access transport is based on the cell scale, burst scale and call connection level. The CLR due to buffer overflow for wireless access node is derived for VBR traffic. The CLR due to transmission errors for wireless channel is derived. Using the CLR for both access node and wireless channel: the CLR of wireless ATM access transport is derived. The relation between CLR and blocking probability is analyzed for VBR traffic to evaluate performance of wireless ATM access transport.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1209-1218
• /
• 1995

In this paper, we develope an ATM switch simulator in order to evaluate the HAN/B-ISDN ATM switch currently being developed by ETRI. It models the basic cell switching functions of the target ATM switch with priority control and multicasting features and it also supports such various traffic models as random or bursty traffic, balanced or unbalanced traffic, multicast traffic models. Using this simulator, we can evaluate the performances of the ATM switch in terms of various performance indices, i.e. cell delay, cell loss probability, etc., and this simulator can be utilized in the system parameter tunings such as the common buffer size and address buffer size.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.273-276
• /
• 1998

This paper proposes a new Asynchronous Transfer Mode(ATM) switch architecture for the Broadband ISDN. The proposed switch has the architecture to prohibit the out-of-sequence in shared buffer switch system with being fixed buffer size in the out-buffered large scale ATM Switch System. then in this paper proposes cell resequence algorithm to decrease the out-of-sequence problem. also, we studied the out-of-sequence problem that was occurred by the cell transfer delay and the cell overflow due to the fixed buffer size when cell resequenced and we propose to implement optimal ACFIFO(Address Counter First In First Out) buffer size which has the minimized cell loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.479-491
• /
• 1994

In this paper, we proposed cell priority control with 2-level thresholds, which was considered cell loss and cell delay requirement, in ATM switch with output buffer. Priority control mechanism presented in this paper improved cell loss rate for cell loss censitive cell and cell delay for delay censitive cell. In this mechanism cell loss rate and mean cell delay of cell priority control mechanism were obtained theoretically. The results show that cell loss rate and mean cell delay improvement become better by adjusting two thresholds according to QOS characteristics.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.93-100
• /
• 1999

When providing MPEG-2 video service through the ATM network, the degradation of QoS caused by cell losses and cell errors occuring from ATM netwok was assessed by the end-users subjectively and then the relation between CLR, CER and subjective QoS of MPEG-2 video was analyzed. Cell losses and cell errors occuring from the ATM network were generated according to the normal and exponential distribution by NEM module. Video sources were divided into sports and drama by moving feature and were tested. The results of our experiments show that the excellent quality of subjective QoS grade 5 was achieved for a cell loss rate of $2{\times}10^{-7}$ and for a cell error rate of $2{\times}10^{-7}$ and the good quality of subjective QoS grade 4 was achieved for a cell loss rate of $2{\times}10^{-6}$ and for a cell error rate of $2{\times}10^{-6}$ When providing MPEC-2 video service through the ATM network, the results of our experiments will be used as valuable information to determine the network performance objectives for satisfying the QoS required by the end-users and to design the network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.779-792
• /
• 1993

In a switching node or an ATM multiplexer of the ATM network, a good bandwidth utilization can be achieved by the priority control using the 1-bit(Cell Loss priority) in ATM cell header. In this paper, the mixed mechanism is proposed to make up for shortcomings of existing space priority control mechanisms and to decrease the loss probability of high priority cell and its performance is analyzed about the cell loss probability. To estimate the performance of proposed mixed mechanism, its cell loss probability is compared with those of non-priority mechanism, push-out mechanism and partial buffer sharing mechanism. The cell loss probability is analyzed using a M/D/1/N modeling and a 2-state MMPP/D/1/N modeling and also comparison between two modelings is made. To verify this result of numerical analysis, the computer simulation is performed for each mechanism using the simulation language, SIMSRIPT II.5.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.95-98
• /
• 1998

In this paper, we propose a cell scheduling algorithm for ABR traffic in ATM multiplexer. Proposed Algorithm can support ABR service more efficiently than existing WRR and DWRR algorithm. We evaluate the performances of proposed algorithm through computer simulation. Also, we model the VBR and the ABR traffics as ON/OFF source, and the CBR traffic as a Poisson source. And the simulation shows that proposed algorithm better performance over other cell scheduling algorithm in tem of mean cell delay time.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.35-38
• /
• 1998

We need the packet transmission of voice, data and video according to the development of ATM technology and packet network. In ATM, packet is parted to the constant length data, we called cell, the method is needed to minimize data loss. Because over ATM, we discard error cell without correction in transmission. So, about video, there is layered coding method. We simulated the coding using wavelet transform, which is structurally layed coded, so need not the additional coder.