• 한국항행학회논문지
• /
• 제19권1호
• /
• pp.7-14
• /
• 2015

본 논문에서 국내 공항별 비행장 관제시뮬레이터(ATCS; aerodrome traffic control simulator)를 구축하기 위한 모델을 제안한다. ATCS는 관제사의 직무교육과 새로운 관제시스템 교육을 위한 연구기능 등으로 활용된다. 이런 기능들을 수행하기 위해, 우리는 ATCS를 교육, 연구 그리고 통합관리 시스템 등의 세 가지 유형으로 분류하였고 국내 공항별 근무 환경과 교육 환경 등으로 분석하였다. 따라서 우리는 국내 공항별 구축 모델을 균등형, 차등형, 그리고 센터형 등으로 제안하고 각 시스템에 대한 장단점을 분석한다. 또한 우리는 ATCS 구축 모델을 구축 비용과 유지 보수비용, 활용성 그리고 확장성 등의 항목으로 검토하였다. 그에 따라 국내 공항에 비행장관제시뮬레이터 구축이 적합한 차등형을 제안하였다.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.905-912
• /
• 2010

Modern version of advanced supersonic fighter have ATCS (Automatic Thrust Control System) to maximum flight safety, fuel efficiency and mission capability the integrated advanced autopilot system such as TFS (Terrain Following System), GCAS (Ground Collision Avoidance System) and AARS (Automatic Attitude Recovery System) and etc. This paper addresses the design and verification of ATCS based on advanced supersonic trainer in HILS (Hardware In the Loop Simulator) with minimum hardware modification to reduce of development cost and maintain of system reliability. The function of ATCS is consisted of target speed hold mode in UA (Up and Away) and angle of attack hold mode in PA (Power Approach). The real-time pilot evaluation reveals that pilot workload is minimized in cruise and approach flight stage by ATCS.

• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.52-59
• /
• 2020

Automatic tool changers (ATCs) can be divided into drum and chain types. Drum-type ATCs contain a magazine, where the tools are mounted, and a cam gearbox, which swaps the tools via roller gear and grooved plate cams. Drum-type ATCs are advantageous in that the operating time for the tool magazine is more rapid than that of chain-type ATCs and the length of the unit is shorter. Thus, drum-type ATCs can be fabricated into various shapes and forms depending on the number of tools and the magazine size in accordance with machining center requirements and consumer demand. In particular, the price competitiveness of a machining center with a drum-type ATC is higher, while drum-type ATCs are more rigid with fewer parts, possibly reducing the need for regular servicing. This study aims to verify the structural stability and design validity of the magazine base, which is the main structure of a drum-type ATC, using finite element analysis. This study kinematically verifies the specifications of the selected drive motor and reducer and assessed the design of the cam gearbox. It also conducts a structural analysis of the roller camp, which is the core component of the cam gearbox, based on the results of the kinetodynamic analysis, thus validating the structural design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.1013-1027
• /
• 2011

In this paper we propose ATCS, a practical TCP protocol coding scheme based on network coding for satellite IP networks. The proposal is specially designed to enhance TCP performance over satellite networks. In our scheme, the source introduces a degree of redundancy and transmits a random linear combination of TCP packets. Since the redundant packets are utilized to mask packet loss over satellite links, the degree of redundancy is determined by the link error rates. Through a simple and effective method, ATCS estimates link error rates in real time and then dynamically adjusts the redundant factor. Consequently, ATCS is adaptable to a wide range of link error rates by coding TCP segments with a flexible redundancy factor. Furthermore, the scheme is compatible with traditional TCP variants. Simulation results indicate that the proposal improves TCP performance considerably.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.489-493
• /
• 2012

Automatic tool changers(ATCs) store tools used in a machining center to its magazine and changes the tools automatically. Tools of machine centers are changed and then precisely equipped to spindle system by the ATC. Therefore, the stability and reliability of the ATC is very important. But, there is lack of development and evaluation on basic performance and vibration of the ATCs. So, in this study, a BT40 ATC test bench was developed to verify stability and reliability of BT40 ATCs.

• 한국항해항만학회지
• /
• 제26권5호
• /
• pp.537-542
• /
• 2002

최근에, 자동화 크레인 제어 시스템은 빠른 속도와 신속한 수송이 요구되어 지고 있다. 따라서, 컨테이너가 초기좌표에서 최종좌표로 이동될 때 컨테이너 경로는 최소시간에 흔들림 없이 설계되어야 한다. 이를 위해 본 연구에서는 최종 좌표까지 이동에서 충돌을 피하기 위하여 충돌방지 경로를 계산하였다. 그리고, 정확한 주행 제어를 위해서 신경회로망 예측 PID제어기를 구성하였다. 제안된 예측제어 시스템은 PID 파라미터를 생산하기 위하여 신경회로망 예측기, PID 제어기 그리고 신경회로망 자기 동조기로 구성하였다 크레인 시스템을 통한 시뮬레이션 분석에서 다른 기존의 제어기들 보다 우수한 제어 수행을 증명하였다.

• 한국항공운항학회지
• /
• 제32권1호
• /
• pp.91-102
• /
• 2024

This study aimed to investigate the sleep-wake patterns, social jetlag (SJL), and daytime sleepiness (DS) among air traffic controllers (ATCs) with rotating shifts. A total of 133 shift-rotating ATCs participated by completing self-report questionnaires regarding their sleep-wake patterns and DS. SJL, indicating the mid-sleep difference between workdays (W) and free days (F), was calculated for each shift. Night-shift workdays had the shortest sleep duration (SD) (5.28 hours), whereas free days following day shifts had the longest SD (6.66 hours). SJL for day and night shifts was 2.73 and 2.71 hours, respectively. The average DS score was 7.92 out of 24, with a 28.6% prevalence of DS. There was a negative correlation between SD following day shifts and SJL for the day shifts. Given these findings, it is recommended to implement effective interventions and work schedules to maintain consistent sleep patterns and minimize social jetlag to address sleep issues for shift-working ATCs.

• 한국항공운항학회지
• /
• 제18권1호
• /
• pp.72-82
• /
• 2010

This study investigated how air traffic controllers (ATCs) perceive the visual information on radar screen and examined quantitative and qualitative differences as a function of expertise. Little research has shown that how much information is processed by ATC visually and perceptually, how ATCs represent the information, and what difference exists between experts and novices. Participants were asked to draw representing visual information on the blank sector map after a 5-second exposure. Data were analyzed by a superimposing method to identify correctly represented information. Results showed that the expert group had much larger size of chunking and their pattern was wider and more accurate than the novice group. The practical application and methodological implications are also discussed for further research.

• 대한인간공학회지
• /
• 제29권3호
• /
• pp.337-345
• /
• 2010

The purpose of this study was to investigate the effects of sleep/wake behavior for shiftwork in air traffic controllers (ATCs) using wrist actigraph for ten workers on a continuous full-day three-team three-shift system of forward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for three days (one shift cycle) for each subject. The mean activity counts during an on-duty period progressively increased from the night, the swing, to the morning shifts. The doze length during on-duty periods showed decreases in the morning and swing shifts as compared to the night shift. Total sleep time (TST) and sleep efficiency (SE) during off-duty periods increased in the morning-1 and swing-night shift compared to the morning-2 shift. Finally, I discussed the role of doze-taking during the burden on night shift ATCs.

• 산업공학
• /
• 제19권3호
• /
• pp.214-224
• /
• 2006

The container handling times of automated transfer cranes(ATCs) significantly affect the productivity of container terminals. In this paper, evaluation models for the container handling times of ATCs are suggested for import container blocks with different transfer point configurations. Firstly, evaluation models for various motion times of stacking and retrieving operations of ATC are suggested for two basic alternatives of import container blocks. In addition, in considering the space allocation, evaluation methods for the container handling times of ATC are suggested. Finally, the container handling times for each case are compared with each other in order to analyze how the block shape and the transfer point locations affect the container handling times of ATC.