• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.933-942
• /
• 2017

Purpose: The purpose of this paper is to evaluate the performance quality of the open source DBMSs. Performance quality is defined as processing time for Join queries. Query processing time is measured and compared in the most widely used open source DBMSs and commercial DBMS. Methods: By varying the number of tuples of two relations to be joined, the average processing time(seconds) of a Join query in each DBMS was obtained experimentally. ANOVA and Tukey HSD test were used in order to compare the performance quality of DBMSs. Results: There was a significant difference between the performance qualities of the three DBMSs at all experimental levels where the number of tuples was 100, 1,000, 2,000, 10,000, and 50,000. As a result of the Tukey HSD test, two open source DBMSs (MariaDB, MySQL) were classified in the same group only at the tuple level of 100. The commercial DBMS (MS-SQL Server) belonged to another group. At level of more than 1,000 tuples, all three DBMSs belonged to different groups. Conclusion: Within the open source DBMS group, MariaDB showed the better performance quality except for a small number of tuples. Thus the results show that MariaDB can be the alternative to MySQL which is currently most widely used. Between open source DBMS and commercial DBMS groups, MS-SQL Server always shows the best performance quality, but the less number of tuples, the less the difference.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2002

The main idea behind the Intelligent Networks(IN) concept is the separation of switching functionality from the service control, in order to meet various service requirements of subscribers and development of new services in time. In (N+1) type Intelligent Network with FEP-BEP framwork, each SCP-BEP system maintains its own subscibers' database respectively. In this case, DB updating operations at each SCP-BEP should be peformed concurrently such that DB updating method could affect the overall system performance. Moreover, it is not easy to predict the current system capacity to satisfy the future IN subscribers' service needs. In this paper, we discuss how much DB updating method affects the performance trends of (N+1) type Intelligent Network with FEP-BEP system by means of the simulation technique as the number of calls increase. The average turnaround time is used as a system performance measure.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.95-101
• /
• 2005

Adsorption and desorption experiments were carried out on rough rice and brown rice (Nampyung) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 8.7 and $25\%$ (db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey and the modified Oswin model. The ERHs of rough rice and brown rice decreased with an decrease in moisture content and temperature, and the effects of temperature was no significant at moisture content of $25\%$ (db). Equilibrium moisture content (EMC) of brown rice was higher than rough rice at same temperature and relative humidity. Desorption EMC is higher than the adsorption, but there is no significant difference between desorption and adsorption EMC in moisture content near $25\%$ (db) at rough rice and near 9, 21 and $25\%$ (db) at brown rice. The modified Oswin model was the best in describing the adsorption EMC and the modified Chung-Pfost model was the best in describing the adsorption ERH of rough rice. The modified Oswin model was the best in describing the adsorption EMC/ERH of brown rice. The modified Chung-Pfost model was the best in describing the desorption EMC/ERH of rough rice and brown rice.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2008

Desorption experiments were carried out on soybean (Taegwang) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 6.74 and 28.87%(db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer. The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey, the modified Oswin and the modified GAB model. The ERHs of soybean under the moiture content of 16.67%(db) decreased with an decrease in moisture content and temperature, but the ERH of the moisture content of 28.87%(db) material decreased with an increase of temperature. The modified GAB model was the best in describing the EMC/ERH of soybean.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.72-80
• /
• 2009

In this parer, we propose a hardware abstraction architecture(HAA) for low cost flash memories that can be applicable to wireless sensor nodes. The proposed HAA consists of three layers. The three layers are 1) HHL(Hardware Interlace Layer), HAL(Hardware Adaption Layer), and HPL(Hardware Presentation Layer), where HIL provides a platform independent interlace to applications of upper layers, HAL performs hardware resource management, program status control, and generation of logical instructions as main core of the HAA, and HPL initializes hardware and communicates data between MCU and flash memory. We implemented our HAA on AT45DB flash memory, and the HAA used 4,384 bytes program memory and 195 bytes data memory respectively. Since the proposed HAA is composed of well defined three layers and shows a low utilization of memory, it can provides a high efficiency in terms of flexibility, scalability, and re-usability, and thus the HAA is well suited for wireless sensor nodes.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.269-282
• /
• 2003

We examined the hypothesis that the crater formation rate exhibits periodicity, employing data sets of Grieve (1991), Moon et al. (2001), and the Earth Impact Database(2002; DB02). DB02 is known to supercede previous compilations in terms of its accuracy and precision of the ages; it is the first time that this database has been used for periodicity analysis. For data sets comprising impact structures with $D{\geq}5km$(and also those with $D{\geq}20km$), there is no convincing evidence for periodicities in the crater ages, according to our Fourier analysis. However, we detected two peaks at 16.1Myr and 34.7Myr for craters with $D{\geq}30km$; we confirm that the age distribution of impact craters with $D{\geq}45km$ has dominant power at 16.1Myr. Thus, we may conjecture a probable periodic shower of Earth impactors with sizes $d{\geq}1.5km$. In addition, we found that the selection of data sets, the lower limits on the ages and diameters of impact craters, as well as the accuracy and precision of the ages, all constitute crucial factors in reconstructing the impact cratering history of the Earth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2008

This paper proposes the efficient system for automatic design of FSS(Frequency Selective Surface) with periodic pattern and frequency characteristics specified by operator. The proposed system derives optimal design parameters through tool for analysis of FSS with arbitrary pattern, DB(Data Base) implemented from limited simulation and measurement data of FSS, and GA(Genetic Algorithm) for optimizing design parameters. FSS analysis tool consists of two analysis tools. One is the simulator for analysis of monolayer FSS that using moment method, another is the tool with approximated analysis method of FSS with dielectric layer. Given pattern configuration and characteristics specified by operators, the DB system searches the best matching FSS, and provides initial genes to GA from the searched parameters, which drastically reduces running time of GA for finding the FSS design parameters. In this paper, the proposed design system is verified through simulation and measurement about FSS with various patterns.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.46.1-46.8
• /
• 2020

Objectives: This study aimed to investigate the incidence and location of the second mesiobuccal root (MB2) canal in maxillary molars with the aid of various measuring points and lines using cone-beam computed tomography (CT). Materials and Methods: A total of 205 images of patients who underwent cone-beam CT examinations between 2011 and 2015 as part of their dental diagnosis and treatment were included. There were 76 images of the maxillary first molar and 135 images of the maxillary second molar. Canal orifices were detected at -1 mm from the top of the pulpal floor on cone-beam CT images. Image assessment was performed by 2 observers in reformatted image planes using software. Assessments included measurement of the distance between the MB1 and MB2 canals, and the angles between the lines connecting the MB1-MB2 and distobuccal (DB)-palatal (P) canals. The data were analyzed using the student's t-test. Results: The prevalence of the MB2 canal was 86.8% in the first molar and 28.9% in the second molar. The angle between the lines connecting the MB1-MB2 and DB-P canals was 2.3° ± 5.7° in the first molar and -3.95° ± 7.73° in the second molar. The distance between the MB1 and MB2 canals was 2.1 ± 0.44 mm in the first molar and 1.98 ± 0.42 mm in the second molar. Conclusions: The angles between the lines connecting the MB1-MB2 and DB-P canals was almost parallel. These findings may aid in the prediction of the location of the MB2 canal orifice.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.285-295
• /
• 2001

This study describes the analysis on the dynamic characteristics of model as a fundamental studies for the horn fish Hemiramphus sajor surface pair trawl gear. The model experiments were carried out in a flume tank by using model net for the horn fish surface par trawl gear. The model net was made to the scale of 1/40 by scaling down two surfce par trawl boats of 6.67 and 9.98 ton used for sea experiment in the coast of Jeju Island. Dimensions of the model net were 1.2m for stretch length of net, 1.3m for float line, 1.0m for sinker line, 2.5g for floats, and 0.86g for sinkers. Experiments were conducted in the observation channel of a flume tank with experimental equipments used to change the distance between paired boats and towing velocity. Motion of model net during towing was recorded by two sets of digital camera which were placed in the top and side of the model net. The leading coordinate of net height and net mouth width was captured by the photograph analysis system. Through the experiment, we obtained the following results: 1. The relationship between the net hight(Nh) and towing velocity(Vt) during towing was found to be Nh=(2.39Db-$^{0.62})Vt^{0.56}$ and the relationship between the net mouth width (Nw) and towing velocity during towing was Nw=(0.96Db^{0.62})Vt^{0.11}$, where Db is the distance between paired boats. 2. The relationship between the net tension(Nt) and towing velocity during towing was found to be Nt=106.94Vt+1.43 and the model net becomes parallel to the water surface at the towing velocity larger than 1.5 Knot. 3. The relationship between the net opening area(Na) and towing velocity during towing was found to be Na=(2.28Db0.37)Vt.-0.45, and the relationship between the filtering volume(Fv) and towing velocity during towing was Fv=(69.9Db$^{0.37})Vt^{0.55}$. The net opening area and filtering volume reach maximum value at the distance of 25m between paired boats.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.4
• /
• pp.45-53
• /
• 1999

A pre amplifier, a limiting amplifier, and a decision IC chipset for 10Gbit/s optical receiver was implemented with AIGaAs/GaAs HBT(Heterojunction Bipolar Transistor) technology. The HBT allows a cutoff frequency of 55GHz and a maximum oscillation of 45GHz. An optical receiver front-end was implemented with the fabricated pre amplifier IC and a PIN photodiode. It showed 46dB$\Omega$, gain and $f_{3db}$ of 12.3GHz. The limiting amplifier Ie showed 27dB small signal gain, $f_{3db}$ of 1O.6GHz, and the output is limited to 900mVp-p from 20mVp-p input voltage. The decision circuit IC showed 300-degree phase margin and input voltage sensitivity of 47mVp-p at 1OGbit/s.