• 한국게임학회 논문지
• /
• 제8권2호
• /
• pp.25-35
• /
• 2008

<승람도놀이>는 조선시대부터 즐겼던 전통 보드게임으로 실용화할 가치가 놓은 게임이다. 이 논문에서는 <승람도놀이>를 인생게임과 같이 지금의 현실에 맞게 게임화하기 위해서 <승람도놀이>의 특징을 파악하고 그 현대적 응용 가능성에 대해 살펴보았다. <승람도놀이>의 특징은 선진적인 이동방법, 캐릭터성의 이용 및 공간인지의 교육적 특성을 갖춘 Move and Roll 주사위 게임이라는 점에 있다. 한국의 지도 모양의 보드관을 이동하면서 주요한 한국의 명승지와 명승지에 얽힌 역사와 문화를 학습할 수 있다. 특히 다양한 경로를 통한 이동 방법 및 캐릭터성은 이 놀이의 큰 장점이라고 할 수 있다. <승람도놀이>의 실용화는 이러한 특징을 바탕으로 놀이판의 현재화, 다른 주제로의 확장, 주제에 따른 캐릭터의 변용, 디지털화 둥을 통해 기대해 볼 수 있을 것이다.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.

• 한국식품영양과학회지
• /
• 제40권12호
• /
• pp.1797-1801
• /
• 2011

아밀로오스 함량에 차이가 있는 일반 멥쌀 현미(아밀로오스 20.1%)와 저아밀로오스 현미(아밀로오스 7.3%)를 제분 방법을 달리하여 현미가루로 제조한 후 제분방법별 현미가루의 이화학적 특성을 비교 조사하였다. Pin mill로 건식제분 한 현미가루의 입자크기가 수침후 roll mill에 의해 습식제분 한 현미가루에 비해 작았고 입자크기는 습식제분 하여 건조한 현미가루를 2차 건식 재분쇄하는(습식/건식) 제분방식에 의해 더 감소하였다. 현미가루의 전분손상도는 건식제분 현미가루가 14.6~15.6%로 습식제분 4.2~4.8%에 비해 현저하게 높았으나 습식/건식제분이 그대로 건식제분 하는 방법에 비해 입자크기가 미세해지면서 현미가루의 전분손상도는 줄여줄 수 있는 것으로 나타났다. 현미가루의 수분흡수지수는 습식/건식 현미가루에서 가장 낮았으며 수분용해도지수는 건식>습식/건식>습식제분 순이었다. 습식제분 한 현미가루가 건식제분보다 최고점도가 낮은 반면에 paste의 최종점도는 증가하여 setback은 증가하는 경향을 보였다. 제분방법별 일반 현미가루의 평균 최고점도, trough, breakdown, 최종점도, setback이 저아밀로오스 현미가루에 비해 훨씬 높게 나타났으며 전분의 노화 정도에 서로 차이가 있을 것으로 예측되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권5호
• /
• pp.716-722
• /
• 2013

The aim of the present study was to determine the influence of age of animal, hot carcass weight, pH, conformation and fat class on basic beef quality attributes (tenderness, sarcomere length, basic chemical composition, marbling and colour) in a group of purebred animals. The object of the study was beef of Limousin bulls (25 to 27 months, hot carcass weight - $432{\pm}31$ kg, "U" conformation class, "2"-"3" fat class). Analysed cuts were Infraspinatus muscle from the blade and Longissimus dorsi muscle from the cube roll and the striploin. Tenderness was analysed with universal testing machine, colour - chromometer analysis, sarcomere length - microscopic method, basic chemical composition - near-infrared spectroscopy and marbling - computer image analysis. No differences in tenderness and sarcomere length were observed within the age groups of Limousin bulls (age of 25, 26, 27 months) (p>0.05). Moisture (p = 0.0123) and fat (p = 0.0250) content were significantly different for meat of animals slaughtered at the age of 25 and 27 months. No influence of pH value on tenderness was observed, but at the same time, influence on sarcomere length (p = 0.039) and $b^*$ component of colour (0.045) was found. For "U" conformation class, in subclasses, as well as for fat classes "2"-"3", there were no differences in tenderness, sarcomere length and colour components. Higher fat content was observed in the higher fat class, rather than in lower, however this feature was not associated with marbling.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• Journal of Ginseng Research
• /
• 제14권2호
• /
• pp.317-331
• /
• 1990

Nitrogen compounds of Panax ginseng and their biological activities in plant and animal were reviewed. Major nitrogen combounds found in P. ginseng are free amino acids, Water soluble teins, insoluble proteins and peptides. Minor nitrogen compounds are dencichine. glycol)roteins. amines, alkaloides, methoxy or alkyl pyrazine derivatives. free nucleosides and nllrleir arid bases. 4-me- thymi-5-thiazoleethanol and pyroglutamic acid. The contents of total nitrogen and protein in root increased until 13 years old rvhich was the highest age tinder investigation. Soluble protein content increased With the root weight and was higher in xylem pith than cortex-epidermis indicating the rlosc relation with root growth. Arginine which covered 58% of total free amino aroids may serve as a storage nitrogen. Arginine seems to be changed into proline in rhizome, threonine in stem and again threoning and arginine in leaf. The greater the root weight the higher the polyaminc content. Polyamine stimulated the growth of root callus. Physiological roles of other minor nitrogen compounds are unknown although dencichine content is relatively high (0.5% d.w.). biochemical and pharmatological activities of some nitrogen compounds for animal were more investigated than physiological roll iota plant itself. Radiation and U.V. protective function (heat stable protein), insulin-like activity in lipogenesis and lipolysis (adenosine and pyroglutamic acid), depression of blood sugar content (glycopeptide). hemostatir and nellrotoxic activity (denrichine) and. sedative and hypnotic activity (4-methyl-5-thiazoleethilnol) are reported. Heat stable protein increased with root age. The traditional quality critsria appear to be well in accordance with biological activities of nitrogen compounds. Chemical stlldies of nitrogen compounds seem relatively rare, probably dole to difficulty of isolation, subsequently the investigations of biological activities are little.

• 한국입자에어로졸학회지
• /
• 제12권4호
• /
• pp.145-150
• /
• 2016

During the chemical mechanical planarization (CMP) process, slurry that comprises abrasive particles can directly affect the CMP performance and quality. Mainly, the large particles in the slurry can generate the defects on the wafer. Thus, many kinds of filters have been used in the CMP process to remove unwanted over-sized particles. Among these filters, the point-of-use (POU) filter is used just before the slurry is supplied onto the CMP pad. In the CMP research field, analysis of the POU filter has been relatively exceptional, and previous studies have not focused on the standardized filtration efficiency (FE) or filter performance. Furthermore, conventional evaluation methods of filter performance are not appropriate for POU filters, as the POU filter is not a membrane type, but is instead a depth type roll filter. In order to accurately evaluate the POU filter, slurry FE according to particle size was measured in this study. Additionally, a CMP experiment was conducted with filtered slurry to demonstrate the effects of filtered slurry on CMP performance. Depending on the flow rate and the filter retention size, the FE according to particle size was different. When the small and large particles have different FEs, the total filtration efficiency (TFE) can still have a similar value. For this reason, there is a need to measure the FE with respect to the particle size to verify the effects of the POU filter on the CMP process.

• Strategy21
• /
• 통권41호
• /
• pp.261-293
• /
• 2017

Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2459-2467
• /
• 2010

본 논문은 공공의료보건기관에서 근무하는 방문건강인력의 구강보건에 대한 전문성 제고의 목적에서 구강건강 지식 및 실천에 대해 조사하였다. 연구 결과는 다음과 같다. 첫째, 구강건강지식은 치주질환 67%, 치아우식증 68%, 일반치과지식은 68.4%이상의 정답률을 보였다. 둘째, 구강건강실천은 예방목적의 치과방문에서 50%이상, 치료를 위해서 60.1%가 치과방문을 하는 것으로 조사되었다. 치석제거는 46.6%가 정기적으로 받는 것으로 나타났고, 치과치료이용을 89.6%가 종합병원·치과(병)의원을 이용하는 것으로 조사되었다. 칫솔질의 경우 3회 이상은 89.5%, 구강위생용품으로는 치실을 58%로 가장 많이 사용하였으며, 칫솔질 방법으로 회전법을 시행하는 대상자는 46%로 조사되었다. 셋째, 일반적 특성에 따른 구강건강지식은 연령(F=5.25, p<0.01), 보건의료직 경력(F=3.94, p<0.01)에 따라, 구강건강실천은 방문보건경력에 따라 유의한 관련성을 보였다(F=3.20, p<0.05).

• Child Health Nursing Research
• /
• 제4권2호
• /
• pp.159-176
• /
• 1998

In effort to conduct comparative study on the caregiving environment of Neonatal Intensive Care Unit(NICU) in both U. S and Korea, this study was been conducted first in the U.S. Purpose : The purpose of this study is to identify the physical environment and direct caregiving practices to lowbirth weight infants in NICU in the US. It also aims to examine the NICU outcome status and behavioral reponses of lowbirth weight infants. Methods : A study design using descriptive and inferential statistics was been conducted through an observational, field method. A sample of 15 preform infants admitted to NICU were recruited for the study. The subjects were those with birth weight between 1,000 gm to 1,500 gm, born at the gestation period of 27 to 33 weeks, and without any chromosomal or other genetic anomalies, major congenital infections, or maternal illness. Thirty minutes observation(three times of ten minutes of continuous observation)of the infant's behavior and physiological status, and an four-hour observation of the physical environment and direct care giving procedures were been conducted on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. The data to be collected were in four areas : the demograghic characteristics of the infants, the physical environment and care giving procedures, the frequency of the infant's designated behavior and physiological response, and NICU outcome variables. A descriptive analysis and Kruskal-Wallis, Pearson r were been applied according to variable characteristics. Results : 1. Mother's mean age was 29.47. The sample consisted of 6 males and 9 females. Mean gestational ages were 29.17 weeks. Mean birth weight was 1236.33g. Mean Apgar scores at one minute were 6.6, and 7.8 at five minutes. 2. The location for the incubator was in the distance from the light, X-ray screens and nursing station, in proximity to side-lamp, telephone and faucet on the third day after birth. The location for the incubator was in the distance from the light and radio on the tenth day and in proximity to nursing station on the day of dischage from the NICU or at 34weeks postconception. 3. Nesting was the most applying aids to the infants. And foot roll, shielding and plastic frame were frequently using by nurses for facilitating well modulated restful posture. 4. There were statistically significant changes in the patterns of physical environment included locating the infant's incubator and bedding, specific aids to self regulation on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. 5. Statistically significant changes were not appeared in the patterns of direct caregiving procedure to the infants included stress inducing or reducing manipulations on the 3rd and 10th day after birth, and on the day of discharge from the NICU or at 34weeks postconception. 6. The stress response of the infants in NICU were significantly reduced as the infants grow older. 7. There were not statistically significant correlation between the physical envronment and the stress responses of the infants in NICU. 8. There were statistically significant correlation between the direct caregiving procedure to the infants and the stress response of the infants in NICU in the second and third observation on the day three. 9. Average weight gain per day from birth to discharge was 38.73g, number of days in the hospital was 42.60, number of days before bottle feeding was 3.6. Postconception age starting bottle feed ing was 31/sup +5/ weeks. Number of days on mechanical ventilator was average 7.64, 11.42 was an average number of days of oxygen need. Conclusion : It, thus, appears that to minimize the sensorymotor stimulation for the low birthweight preterm infant in NICU, manipulation of care giving practices to the babies whatever the stress inducing or reducing procedures, have to be limited in the immediate early stage after birth. And it needed to be reexamine to identify the appropriate and specific physical environment and the patterns of direct caregiving to the low birthweight preform infant as the infants grow older in NICU.