• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.45-51
• /
• 2014

This is to study the effects of various pretreatment methods of agricultural residue, corn stover, and to compare the feature and pros and cons of each method including dilute sulfuric acid (DSA), soaking in aqueous ammonia (SAA), and ammonia recycle percolation (ARP). In order to convert corn stover to ethanol, various pretreatments followed by simultaneous saccharification and co-fermentation (SSCF) were tested and evaluated in terms of ethanol yield. With 3%, w/w of glucan loading using ARP-, DSA-, and SAA-treated solids, SSCFs using recombinant E. coli strain (ATCC$^{(R)}$ 55124) with commercial enzymes (15 FPU of Spezyme CP/g-glucan and 30 CBU/g-glucan enzyme loading) were tested. In the SSCF tests, 87, 90, and 78% of theoretical maximum ethanol yield were observed using ARP-, DSA-, and SAA-treated solids, respectively, which were 69, 58, and 74% on the basis of total carbohydrates (glucan + xylan) in the untreated corn stover. Ethanol yield of SAA-treated solid was higher than those of ARP- and DSA-treated solids. In addition, SSCF test using treated solids plus pretreated hydrolysate indicated that the DSA-treated hydrolysate showed the strongest inhibition effect on the KO11 strain, whereas the ARP-treated hydrolysate was found to have the second strongest inhibition effect. Bioconversion scheme using SAA pretreatment and SSCF can make the downstream process simple, which is suggested to produce ethanol economically because utilization of hemicellulose in the hydrolysate is not necessary.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.51-63
• /
• 2017

Purpose: Following tooth extraction, alveolar ridge preservation (ARP) can maintain the dimensions of ridge height and width. Although previous studies have demonstrated the effects of ARP, few if any studies have investigated the compressive force applied during grafting. The aim of this study was to determine the effects of different compressive forces on the graft materials during ARP. Methods: After tooth extraction, sockets were filled with deproteinized bovine bone mineral with 10% porcine collagen and covered by a resorbable collagen membrane in a double-layered fashion. The graft materials were compressed using a force of 5 N in the test group (n=12) and a force of 30 N in the control group (n=12). A hidden X suture was performed to secure the graft without primary closure. Cone-beam computed tomography (CBCT) was performed immediately after grafting and 4 months later, just before implant surgery. Tissue samples were retrieved using a trephine bur from the grafted sites during implant surgery for histologic and histomorphometric evaluations. Periotest values (PTVs) were measured to assess the initial stability of the dental implants. Results: Four patients dropped out from the control group and 20 patients finished the study. Both groups healed without any complications. The CBCT measurements showed that the ridge volume was comparably preserved vertically and horizontally in both groups (P>0.05). Histomorphometric analysis demonstrated that the ratio of new bone formation was significantly greater in the test group (P<0.05). The PTVs showed no significant differences between the 2 groups (P>0.05). Conclusions: The application of a greater compressive force on biomaterials during ARP significantly enhanced new bone formation while preserving the horizontal and vertical dimensions of the alveolar ridge. Further studies are required to identity the optimal compressive force for ARP.

• Journal of Korean Public Health Nursing
• /
• v.15 no.1
• /
• pp.202-215
• /
• 2001

This is an exploratory study to describe drinking patterns and alcohol-related problems (ARP) in women. A probability sample was drawn from Kyungnam Providence area 20 to 59 age by a multi- stage cluster sampling method and secondary data analysis was used. Drinking patterns in this study involve lifetime prevalence of alcohol use, year prevalence, month prevalence , frequency and usual quantity of drinking alcohol in a situation, ARPs were measured by employing a modified version of ARP developed by Alcohol Research Group in U.S.A. Three measurements were constructed to represent alcohol-related problems by summing up 41 alcoholic statements, which were consequence, social consequence and dependence. The results were as follows; 1) The lifetime prevalence of alcohol use in women was $80.3\%$ and year prevalence $78.3\%$. High prevalence rates of drinking were observed in the twenties who have at least community college diploma. and frequencies of alcohol use were increased as age increased. 2) More than $27.3\%$ of the respondents who were reported to experience at least a ARP in a year. 3) ARPs were associated with age, religion, frequency and usual quantity of drinking alcohol in situation. Issues were proposed with respect to research methodology and policy implications for public health.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.93-102
• /
• 2011

In this paper we describe an efficient and easy to use network monitoring system which can identify network configuration automatically by means of capturing and analyzing the ARP broadcasting packets. After identifying network nodes, it gathers detail information of each node such as NETBIOS name and number of hop counts using ICMP and then shows subnet configuration with graphical method. This monitoring system also has a subset of intrusion detection system that can monitor any port scanning trial. With this automatic network configuration functions, it helps to lessen address keeping track overhead which is crucial for network monitoring so that it provides efficient network management.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.361-368
• /
• 2016

A ship's rolling motion can make crew and passengers sick and/or apply forces to the structure that cause damage.. Therefore bilge keels are equipped in most ships for anti-rolling. In special cases, anti-rolling tanks (ARTs), fin stabilizers, or gyroscopes can be installed. However, ARTs require a large area to install, and fin stabilizers and gyroscopes are costly to install and expensive to operate. This paper suggests a Anti-rolling pendulum (ARP) to reduce roll motion. ARPs acts like ARTs. However, the ARP has a circular shaped guidance arc instead of the string or wire of a simple pendulum. The device suggested has about 1/ 8 the weight and 1/ 6 the volume of a ART and is more effective. This study derives the nonlinear and linear differential equations of system motion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.509-521
• /
• 1994

This study is an effort to develop computer simulation model that produce precipitation patterns from stochastic model. A stochastic model is formulated for the process of daily precipitation with considering the sequences of wet and dry days and the precipitation amounts on wet days. This study consists of 2 papers and the process of precipitation occurrence is modelled by an alternate renewal process (ARP) in paper (I). In the ARP model for the precipitation occurrence, four discrete distributions, used to fit the wet and dry spells, were as follows; truncated binomial distribution (TBD), truncated Poisson distribution (TPD), truncated negative binomial distribution (TNBD), logarithmic series distribution (LSD). In companion paper (II) the process of occurrence is developed by Markov chain. The amounts of precipitation, given that precipitation has occurred, are described by a Gamma. Pearson Type-III, Extremal Type-III, and 3 parameter Weibull distribution. Daily precipitation series model consists of two models, A-Wand A-G model, by combining the process of precipitation occurrence and a continuous probability distribution on the precipitation of wet days. To evaluate the performance of the simulation model, output from the model was compared with historical data of 7 stations in the Nakdong and Seomjin river basin. The results of paper (1) show that it is possible to design a model for the synthetic generation of IX)int precipitation patterns.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.1
• /
• pp.12-27
• /
• 2007

This fundamental studies on for the productivity improvement and laborsaving of purse seine fishery. Given the difficulty posed from the distortion of net shape caused by the external forces, such as tide, at the time of shooting and pursing, we set the 4 steps of 0, 2, 4 and 6cm/sec in flow velocity in the flume tank for the experiment in order to examine those characteristics. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, and interpreted the characteristics of several motion in water, such as the shape of seine, the change in tension and area during pursing and its the analysis results are as follows. Though the experiment could be conducted up to 6cm/sec of flow velocity that was defined, the experiment could not go on because of the severe distortion in the seine at the flow velocity in excess of 6cm/sec. As for the depth of leadline and reduction rate of side area of seine when the pursing is connected, P seine turned out to be slightly higher than T seine, and the hauling speed and reduction rate of upper area of seine were found similar to each other. The correlation between the hauling time (Ht) and depth of lead line (Dhp, Dht) of P seine and T seine can be expressed by the equation, that is, Dhp=(0.99Pt-7.63)Pt+69.01, Dht=(1.03Pt-7.73)Pt+66.74. The correlation between the hauling time and hauling velocity (Hpp, Hpt) can be expressed by the equation, that is, $Hpp=-0.06Ht^2+0.88Ht+0.78,\;Hpt=-0.05Ht^2+0.81Ht+0.98$ here, Pt is pursing time. And the correlation between the pursing time and the reduction rate of side area (sArp, sArt) can be expressed by the equation, that is, $sArp=-0.48Pt^2+14.79Pt-16.74,\;sArt=-0.45Pt^2+14.56Pt-16.48$. The reduction rate of upper area of seine (tArp, tArt) can be expressed by the equation, that is, $tArp=0.34Pt^2-0.66Pt-0.74,\;tArt=0.34Pt^2-0.27Pt-1.80$. In addition, the correlation between the pursing time and tension of purse line (Tep, Tet) can be expressed by the equation, that is, $Tep=2.79Pt^2+2.26Pt-0.60,\;Tet=2.14Pt^2+8.08Pt-27.50$.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2016

Since 2014, MOLIT (Ministry of Land, Infrastructure, and Transport) is carrying out a KASS project to develop and construct Korean SBAS. KASS can cause damage of human & properties if it has some problem during operation. Therefore, system safety assessment for KASS development is very important. Principal point of system safety assessment is the allocation of DAL(design assurance level) based on the hazard identification and classification. In this parer, the author conducts the allocation of DAL for KASS & its sub-systems based on the international standard(SAE ARP4761), which suggests a best practice of aviation system safety assessment. The result of this paper are the first step of system safety assessment, and can be used for further system safety assessment of KASS project.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2021

Purpose: The alveolar ridge preservation (ARP) is widely conducted for implant placement. However, experimental results using deproteinized porcine bone mineral (DPBM) have been scarce. This retrospective study evaluated factors affecting the primary stability of implants in an area where ARP was performed using DPBM. Materials and Methods: Thirty-eight patients were divided into two groups based on the primary stability, with torque value of 30 Ncm as borderline. To determine the factors that affect the primary stability of implants, we collected data from patients' medical records including age, sex, reentry time, socket location, remaining bone wall at the time of extraction, and type of collagen membrane, as well as from radiographs and histomorphometric analysis. Result: The results showed statistically significant difference for the remaining extraction socket wall (P=0.014), residual graft (P=0.029), and fibrovascular tissue (P=0.02) between the two groups. There was an insignificant tendency toward the time of reentry surgery (P=0.052) and location (P=0.077). All implants placed in sites using DPBM functioned well up to 3 years. Conclusion: Within the limitations of the present study, extraction socket wall, residual graft, and fibrovascular tissue can affect the primary stability at the time of implant placement on grafted sites using DPBM and collagen membranes. In addition, reentry time and locations can be considered. In future studies, comparative experiments in quantified models will be required to supporting the findings.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.2
• /
• pp.27-44
• /
• 2001

In this study, I investigate the drinking behavior and related factors among white collar workers in seoul. Examination was executed with questionnaire to 520 white collar workers. Drinking behavior involves frequency of drinking, amount of alcohol consumption in a drinking situation and alcohol-related problem. Related factors involves the general characteristics, the knowledge about alcohol, the allowable attitude about drinking, work stress and stress copying. This was analyzed with percentage, mean, standard deviation, t-test, ANOV A and pearson's correlation. The results are as follows: Data shows that about 96.3% of the respondents drink at least during the last year and 89.8% of the respondents drink at least during the last month. 59.4% male respondents drink 3-8 times a month, 44.8% female respondents drink 1-2 times a month. High prevalence rates were found in male, married person and those with low-religious spirit in a usual amount of drinking(p〈0.05), male in the latest amount of drinking(p〈0.05), male, forties, married person and those with the highest monthly family income and those with low-religious spirit in frequency of drinking during the latest month(p〈0.05). The score of alcohol-related problem(ARP) was as follows: male workers-2.61, female workers-1.61 out of 35. The score of ARP was statistically significantly different according to sex(p〈0.05). A positive correlation was observed between amount of drinking, frequency of drinking and ARP(p〈0.01). The score of knowledge about alcohol was 3.6 and any correlation and statistically significant difference were not observed between the knowledge about alcohol and drinking behavior. The score of allowable attitude about drinking was statistically significantly different according to sex(p〈0.05), age(p〈0.05). A positive correlation was observed between attitude about drinking and amount of drinking, frequency of drinking, ARP(p〈0.01). The work stress and stress copying had no significant relations with drinking behavior. Most respondents do not drink at stress situation.