• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.3
• /
• pp.2140-2146
• /
• 2020

Background: Stroke patients exhibit arm global synkinesis (GS), involuntary movement due to muscle weakness and irregular muscle tension. But currently there are few studies examined the effects of GS on activates of daily living in stroke patients. Objectives: To investigate the effects the effects of task-oriented bilateral movements, which promote brain plasticity and are based on neurological theory, using the unaffected arm and the affected arm. Design: Quasi-randomized trial. Methods: Twenty stroke patients were randomly assigned to experimental group I (n=10) and experimental group II (n=10). Before the intervention, arm GS was measured using surface electromyography, and the Motor Activity Log evaluated the quantitative and qualitative uses of the affected arm in daily life. The same items were measured four weeks later. Results: The changes in the GS of the arm of experimental group I showed statistically significant differences only in bending motions (P<.05). Both groups showed statistically significant differences in the amount of use (AOU) and the quality of movement (QOM) scores (P<.01). Comparing the groups, statistically significant differences in GS appeared during bending motions (P<.05), and in the AOU (P<.01) and the QOM scores (P<.05). Conclusion: The intervention in GS reduced the abnormal muscle tension of the affected side by increasing the use of the ipsilateral motor pathway, indicating its effectiveness in improving upper limb functions with smooth contraction and relaxation of the muscles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.719-724
• /
• 2011

Most recent birth rate at home raising children, only one has come out well. Accordingly, children born to parents is to have a strong interest, and healthcare (Healthcare) sector, while emerging as a new growth industry (Baby Care) Baby Care also increased the interest. Baby Care products until now the food, toiletries and clothing, etc. Although it advances the development of ubiquitous computing environment with the development of the healthcare industry, Baby Care Electronics products have been developed. Europe and the U.S. infant from another room deungeseoneun feeder. At this time SIDS infants to prevent this phenomenon often takes place in order to measure the status of children and away from parents to children, also can check the status of children was used to implement the Platform. In this paper, using the radio frequency real-time observation of data storage without the parents were determined only by the speed of the ARM11-based systems using the S3C6410 CPU and wireless WI-FI (IEEE8.2.11) technology to prevent sudden infant death using Platform for the implementation study was conducted.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.58-65
• /
• 2008

The study on dual arm robot manipulator which consists of two 6-DOF srms and one 2-DOF torso is introduced. This dual arm robot manipulator is designed for automation of assembly process in automotive manufacturing line. Each industrial 6-DOF arm can be used as a stand-alone type of industrial robot manipulator with 6-DOF and as a manipulator part of dual arm robot at the same lime. These structures help the robot maker willing to succeed in emerging market of dual arm robots have the high competitive power for the current industrial robot market and the emerging market of dual arm robot at the same time. The research results of the design concept, workspace analysis and the PC-based controller will be introduced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1779-1785
• /
• 2010

The experiment is designed to create some useful data on the dressed shapes that contribute to simulating the adaptability of clothes. We studied the dressed shapes of blouse with above-elbow sleeves and sleeveless according to five types of arm movement (basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture. Experiments were conducted to understand the dressed shape through 3-D measurement Vivid 910 and to investigate the width, depth, area distribution and gap of the shape of blouses on the section map with a software program for 3-D shape analysis, Rapid Form 2004. The Data were analyzed by factor analysis. The results of this study are as follows: The ratio of depth per width in the stand-posture was lower than other arm movements and the reach lateral was higher than the reach forward. The gap of the upper body was a briefed 4 factor; front, front-side, back, and back-side. It was higher than the sleeveless with a change of the gap in the dressed blouse with above-elbow sleeves by arm movements per stand-posture. The divisional gap shows the adaptability of clothes according to the types of blouse and arm movements in the change of the ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.11-19
• /
• 1987

The objectives of this study were: 1. To investigate the relationship between arm movement and clothing pressure in the upper arm and shoulder blade area. 2. To find out the relationship between ease of basic pattern and clothing pressure in the upper arm and shoulder blade area. 3. To study any interaction between arm movement and ease of clothing on the clothing pressure. This study was an experimental research using the measuring devices of clothing pressure. The subjects were the unmarried college women. Arm movements were 3 types($45^{\circ}$, $90^{\circ}$, $135^{\circ}$) to the horizontal direction. The ease of basic pattern in the breast was 3 types(4 cm, 6 cm, 8cm). The statistical analyses used in this study included mean, standard deviation and one-way analysis of variance. The results obtained from this research were as follows; 1. The whole clothing pressure increased as the angle of the arm movement increased. Part of upperarm and shoulder blade above axillar gave high clothing pressure while part of upperarm and shoulder blade above upper breast, low pressure. Difference between highest clothing pressure and lowest clothing pressure increased as the arm movementdid. 2. The whole clothing pressure increased as the ease of the basic pattern in breast decreased. No matter how the ease of basic pattern in the breast area varied, the Points where generally showed high and low pressure were identical. 3. The whole arm pressure increased as the movement angle increased and the ease of pattern in breast area decreased. Difference between highest clothing pressure and lowest clothing pressure increased as the movement angle increased and the ease decreased.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.453-458
• /
• 2011

This study aimed to figure out the change of exposure dose to the radiologist according to the C-arm angle change. For the exam it was fixed with 101 kvp and 4.9mA for the exposure time with 3 seconds and 5 seconds respectively. C-arm Tube was located both under and over, then the average was taken after performing for 5 times with the change of angle from -30 degree to 0, 30, 60 and 90 degree. The detector measured in 160cm high from the position of the radiologist who operates the C-arm. The measurement was shown its highest result at -30 degree followed by 0, 30, 60, 90 from the highest order. Over tube method is higher than under tube method. Therefore, to reduce the exposure dose of the radiologist, it is required for using under tube method instead of over tube method. When the angle change is made, it is recommended to use the angle that tube is growing further apart from the radiologist. And it is also necessary to shorten exposed time as much as possible to create the same quality image and also to reduce the exposure dose.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.11-20
• /
• 2020

PURPOSE: Excessive activity of the upper trapezius (UT) muscle contributes to a rounded shoulder posture (RSP) through abnormal rotation of the scapula that weakens the lower trapezius (LT) and serratus anterior (SA) muscles. This study compared the effects of two arm-lifting exercises with and without the use of a Thera-band on the activities of LT, SA, and UT muscles, and the LT/UT and SA/UT activity ratio in subjects with a rounded shoulder posture. METHODS: Sixteen subjects with RSP participated in this study. All subjects performed arm-lifting (AL), diagonal arm-lifting (DAL), arm lifting with isometric adduction (ALIA), and diagonal arm-lifting with isometric adduction (DALIA) exercises. The surface electromyography data, LT, SA, UT, and the LT/UT and SA/UT activity ratios were measured. A paired t-test was used to compare the differences between two arm-lifting exercises and two arm lifting with isometric adduction exercises. RESULTS: In ALIA and DALIA exercises, the UT muscle activity decreased significantly, whereas the LT/UT, SA/UT activity ratio increased significantly. The activity of SA muscle increased significantly more with DALIA than that with DAL. CONCLUSION: Arm-lifting exercises using a Thera-band can be implemented as an effective way to reduce the UT overactivity and increase the SA activity and LT/UT, SA/UT activity ratio in subjects with RSP.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.451-459
• /
• 2014

This study was to performed to get the reference data of the kinetic parameters for normal subjects according to the arm swing type. Forty-five normal subjects($22.62{\pm}2.69years$) pariticpated in this study and preformed 4 sequence according to the arm swing type as follows; first procedure-normal arm swing, second procedure-one arm swing, thrid procedure-no arm swing, fourth procedure-fitness arm swing. There were significant differences according to the arm swing type in the kinetic parameters such as walking speed, hip power, ground reaction force of vertical in terminal stance phase(p<.05). These finding can be utilized (a) as a reference for kinetic data of gait analysis in normal subjects, and (b) as an aide in evaluating and treating patients who have problems relating to gait.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.168-172
• /
• 2012

Control arm is the structural component that pivots on two places. One end of the control arm is attached to the body frame and the other end is attached to the steering knuckle. The former research proposed the structural design by applying optimization technique with aluminum alloy. This study suggests a durability test method on the developed upper control arm to validate the analysis results. The durability analysis results of the developed control arm by using MSC Fatigue is confirmed to be close to infinite life. The weak model of developed control arm which occurs to finite life is made to perform the durability test and the zig design is developed in this process.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.749-757
• /
• 2015

As the smart era, the use of smart devices is increasing. Smart devices are widely used to provide a human convenience, but there is a risk that information is exposed. The smart devices to prevent this problem includes the encryption algorithm. Among them, The hash function is an encryption algorithm that is used essentially to carry out the algorithm, such as data integrity, authentication, signature. As the issue raised in the collision resistance of SHA-1 has recently been causing a safety problem, and SHA-1 hash function based on the current standard of SHA-2 would also be a problem in the near future safety. Accordingly, NIST selected KECCAK algorithm as SHA-3, it has become necessary to implement this in various environments for this algorithm. In this paper, implementation of KECCAK algorithm. And SHA-2 On The ARM-11 processor, and compare performance.